Home | History | Annotate | Download | only in bnu
      1 /*
      2  * CDDL HEADER START
      3  *
      4  * The contents of this file are subject to the terms of the
      5  * Common Development and Distribution License (the "License").
      6  * You may not use this file except in compliance with the License.
      7  *
      8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
      9  * or http://www.opensolaris.org/os/licensing.
     10  * See the License for the specific language governing permissions
     11  * and limitations under the License.
     12  *
     13  * When distributing Covered Code, include this CDDL HEADER in each
     14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
     15  * If applicable, add the following below this CDDL HEADER, with the
     16  * fields enclosed by brackets "[]" replaced with your own identifying
     17  * information: Portions Copyright [yyyy] [name of copyright owner]
     18  *
     19  * CDDL HEADER END
     20  */
     21 /*
     22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
     23  * Use is subject to license terms.
     24  */
     25 
     26 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
     27 /*	  All Rights Reserved  	*/
     28 
     29 
     30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
     31 
     32 
     33 #include "uucp.h"
     34 
     35 #if defined(BSD4_2) || defined(ATTSVR4)
     36 #include <netdb.h>
     37 #include <netinet/in.h>
     38 #include <sys/socket.h>
     39 #endif
     40 #ifdef UNET
     41 #include  "UNET/unetio.h"
     42 #include  "UNET/tcp.h"
     43 #endif
     44 
     45 #include <libgen.h>
     46 
     47 EXTERN void alarmtr();
     48 EXTERN jmp_buf Sjbuf;
     49 EXTERN char *fdig();
     50 EXTERN int interface();
     51 EXTERN int fd_mklock(), fd_cklock(), chat(), getdialline();
     52 EXTERN void fixline(), fd_rmlock();
     53 static void translate();
     54 static int gdial();
     55 EXTERN int	Modemctrl;
     56 EXTERN unsigned connecttime;
     57 EXTERN int (*Setup)();
     58 
     59 /*
     60  *	to add a new caller:
     61  *	declare the function that knows how to call on the device,
     62  *	add a line to the callers table giving the name of the device
     63  *	(from Devices file) and the name of the function
     64  *	add the function to the end of this file
     65  */
     66 
     67 #ifdef DIAL801
     68 EXTERN int	dial801();
     69 EXTERN int	open801();
     70 #endif
     71 
     72 #ifdef DATAKIT
     73 EXTERN int	dkcall();
     74 #endif /* DATAKIT */
     75 
     76 #ifdef V8
     77 int	Dialout();
     78 #endif
     79 
     80 #ifdef TCP
     81 int	unetcall();
     82 int	tcpcall();
     83 #endif /* TCP */
     84 
     85 #ifdef SYTEK
     86 int	sytcall();
     87 #endif /* SYTEK */
     88 
     89 #ifdef TLI
     90 EXTERN int	tlicall();
     91 #endif /* TLI */
     92 
     93 static struct caller Caller[] = {
     94 
     95 #ifdef DIAL801
     96 	{"801",		dial801},
     97 	{"212",		dial801},
     98 #endif /* DIAL801 */
     99 
    100 #ifdef V8
    101 	{"Dialout",	Dialout},	/* ditto but using dialout(III) */
    102 #endif
    103 
    104 #ifdef TCP
    105 #if defined(BSD4_2) || defined(ATTSVR4)
    106 	{"TCP",		tcpcall},	/* 4.2BSD sockets */
    107 #else /* !BSD4_2 */
    108 #ifdef UNET
    109 	{"TCP",		unetcall},	/* 3com implementation of tcp */
    110 	{"Unetserver",	unetcall},
    111 #endif /* UNET */
    112 #endif /* BSD4_2 || ATTSVR4 */
    113 #endif /* TCP */
    114 
    115 #ifdef DATAKIT
    116 	{"DK",		dkcall},	/* standard AT&T DATAKIT VCS caller */
    117 #endif /* DATAKIT */
    118 
    119 #ifdef SYTEK
    120 	{"Sytek",	sytcall},	/* untested but should work */
    121 #endif /* SYTEK */
    122 
    123 #ifdef TLI
    124 	{"TLI",		tlicall},	/* AT&T Transport Layer Interface */
    125 #ifdef TLIS
    126 	{"TLIS",	tlicall},	/* AT&T Transport Layer Interface */
    127 #endif /*  TLIS  */
    128 #endif /* TLI */
    129 
    130 	{NULL, 		NULL}		/* this line must be last */
    131 };
    132 
    133 /*
    134  *	exphone - expand phone number for given prefix and number
    135  *
    136  *	return code - none
    137  */
    138 
    139 static void
    140 exphone(in, out)
    141 char *in, *out;
    142 {
    143 	FILE *fn;
    144 	char pre[MAXPH], npart[MAXPH], tpre[MAXPH], p[MAXPH];
    145 	char buf[BUFSIZ];
    146 	char *s1;
    147 
    148 	if (!isalpha(*in)) {
    149 		(void) strcpy(out, in);
    150 		return;
    151 	}
    152 
    153 	s1=pre;
    154 	while (isalpha(*in))
    155 		*s1++ = *in++;
    156 	*s1 = NULLCHAR;
    157 	s1 = npart;
    158 	while (*in != NULLCHAR)
    159 		*s1++ = *in++;
    160 	*s1 = NULLCHAR;
    161 
    162 	tpre[0] = NULLCHAR;
    163 	fn = fopen(DIALCODES, "r");
    164 	if (fn != NULL) {
    165 		while (fgets(buf, BUFSIZ, fn)) {
    166 			if ( sscanf(buf, "%s%s", p, tpre) < 1)
    167 				continue;
    168 			if (EQUALS(p, pre))
    169 				break;
    170 			tpre[0] = NULLCHAR;
    171 		}
    172 		fclose(fn);
    173 	}
    174 
    175 	(void) strcpy(out, tpre);
    176 	(void) strcat(out, npart);
    177 	return;
    178 }
    179 
    180 /*
    181  * repphone - Replace \D and \T sequences in arg with phone
    182  * expanding and translating as appropriate.
    183  */
    184 static char *
    185 repphone(arg, phone, trstr)
    186 char *arg, *phone, *trstr;
    187 {
    188 	static char pbuf[2*(MAXPH+2)];
    189 	char *fp, *tp;
    190 
    191 	for (tp=pbuf; *arg; arg++) {
    192 		if (*arg != '\\') {
    193 			*tp++ = *arg;
    194 			continue;
    195 		} else {
    196 			switch (*(arg+1)) {
    197 			case 'T':
    198 				exphone(phone, tp);
    199 				translate(trstr, tp);
    200 				for(; *tp; tp++)
    201 				    ;
    202 				arg++;
    203 				break;
    204 			case 'D':
    205 				for(fp=phone; *tp = *fp++; tp++)
    206 				    ;
    207 				arg++;
    208 				break;
    209 			default:
    210 				*tp++ = *arg;
    211 				break;
    212 			}
    213 		}
    214 	}
    215 	*tp = '\0';
    216 	return(pbuf);
    217 }
    218 
    219 static u_int saved_mode;
    220 static char saved_dcname[20];
    221 
    222 /*
    223  * processdev - Process a line from the Devices file
    224  *
    225  * return codes:
    226  *	file descriptor  -  succeeded
    227  *	FAIL  -  failed
    228  */
    229 GLOBAL int
    230 processdev(flds, dev)
    231 char *flds[], *dev[];
    232 {
    233 	int dcf = -1;
    234 	struct caller	*ca;
    235 	char *args[D_MAX+1], dcname[20];
    236 	char **sdev;
    237 	EXTERN int pop_push();
    238 	EXTERN void  setdevcfg();
    239 	int nullfd;
    240 	char *phonecl;			/* clear phone string */
    241 	char phoneex[2*(MAXPH+2)];	/* expanded phone string */
    242 	EXTERN void ttygenbrk();
    243 	struct termio tty_orig;
    244 	int ret_orig = -1;
    245 
    246 	sdev = dev;
    247 	/*	set up default "break" routine	*/
    248 	genbrk = ttygenbrk;
    249 
    250 	/*	initialize Devconfig info	*/
    251 	DEBUG(5, "processdev: calling setdevcfg(%s, ", Progname);
    252 	DEBUG(5, "%s)\n", flds[F_TYPE]);
    253 	setdevcfg(Progname, flds[F_TYPE]);
    254 
    255 	for (ca = Caller; ca->CA_type != NULL; ca++) {
    256 		/* This will find built-in caller functions */
    257 		if (EQUALS(ca->CA_type, dev[D_CALLER])) {
    258 			DEBUG(5, "Internal caller type %s\n", dev[D_CALLER]);
    259 			if (dev[D_ARG] == NULL) {
    260 				/* if NULL - assume translate */
    261 				dev[D_ARG+1] = NULL;	/* needed for for loop later to mark the end */
    262 				dev[D_ARG] = "\\T";
    263 			}
    264 			dev[D_ARG] = repphone(dev[D_ARG], flds[F_PHONE], "");
    265 			if ((dcf = (*(ca->CA_caller))(flds, dev)) < 0)
    266 				return(dcf) ;
    267 			if ( interface( ca->CA_type ) ) {
    268 				DEBUG(5, "interface(%s) failed", ca->CA_type);
    269 				Uerror = SS_DEVICE_FAILED;
    270 				/*	restore vanilla unix interface	*/
    271 				(void)interface("UNIX");
    272 				return(FAIL);
    273 			}
    274 			dev += 2; /* Skip to next CALLER and ARG */
    275 			break;
    276 		}
    277 	}
    278 	if (dcf == -1) {
    279 		/* Here if not a built-in caller function */
    280 
    281 		/* We do locking (file and advisory) after open	*/
    282 
    283 		/*
    284 		 * Open the line
    285 		 */
    286 		if ( *dev[D_LINE] != '/' ) {
    287 			(void) sprintf(dcname, "/dev/%s", dev[D_LINE]);
    288 		} else {
    289 			(void) strcpy(dcname, dev[D_LINE] );
    290 		}
    291 		/* take care of the possible partial open fd */
    292 		(void) close(nullfd = open("/", O_RDONLY));
    293 		if (setjmp(Sjbuf)) {
    294 			(void) close(nullfd);
    295 			DEBUG(1, "generic open timeout\n%s", "");
    296 			logent("generic open", "TIMEOUT");
    297 			Uerror = SS_CANT_ACCESS_DEVICE;
    298 			goto bad;
    299 		}
    300 		(void) signal(SIGALRM, alarmtr);
    301 		(void) alarm(10);
    302 		if ( Modemctrl ) {
    303 			DEBUG(7, "opening with O_NDELAY set\n%s", "");
    304 			dcf = open(dcname, (O_RDWR | O_NDELAY) );
    305 			saved_mode = O_RDWR | O_NDELAY;
    306 		} else {
    307 			dcf = open(dcname, O_RDWR );
    308 			saved_mode = O_RDWR;
    309 		}
    310 		strcpy(saved_dcname, dcname);
    311 		(void) alarm(0);
    312 		if (dcf < 0) {
    313 			DEBUG(1, "generic open failed, errno = %d\n", errno);
    314 			(void) close(nullfd);
    315 			logent("generic open", "FAILED");
    316 			Uerror = SS_CANT_ACCESS_DEVICE;
    317 			goto bad;
    318 		}
    319 
    320 		/* check locks BEFORE modifying the stream */
    321 
    322 		if ( fd_mklock(dcf) != SUCCESS ) {
    323 			DEBUG(1, "failed to lock device %s\n", dcname);
    324 			Uerror = SS_LOCKED_DEVICE;
    325 			goto bad;
    326 		}
    327 
    328 		if ( Modemctrl ) {
    329 			DEBUG(7, "clear O_NDELAY\n%s", "");
    330 			if ( fcntl(dcf, F_SETFL,
    331 				(fcntl(dcf, F_GETFL, 0) & ~O_NDELAY)) < 0 ) {
    332 				DEBUG( 7, "clear O_NDELAY failed, errno %d\n", errno);
    333 				Uerror = SS_DEVICE_FAILED;
    334 				goto bad;
    335 			}
    336 		}
    337 	}
    338 
    339 	if ( (*Setup)( MASTER, &dcf, &dcf ) ) {
    340 		/*	any device|system lock files we should remove?	*/
    341 		DEBUG(5, "MASTER Setup failed%s", "");
    342 		Uerror = SS_DEVICE_FAILED;
    343 		goto bad;
    344 	}
    345 
    346 	/* configure any requested streams modules */
    347 	if ( !pop_push(dcf) ) {
    348 		DEBUG(5, "STREAMS module configuration failed%s\n","");
    349 		Uerror = SS_DEVICE_FAILED;
    350 		goto bad;
    351 	}
    352 
    353 	/* save initial state of line in case script fails */
    354 	ret_orig = ioctl(dcf, TCGETA, &tty_orig);
    355 
    356 	/* use sdev[] since dev[] is incremented for internal callers */
    357 	fixline(dcf, atoi(fdig(sdev[D_CLASS])), D_DIRECT);
    358 
    359 	/*
    360 	 * Now loop through the remaining callers and chat
    361 	 * according to scripts in dialers file.
    362 	 */
    363 	for (; dev[D_CALLER] != NULL; dev += 2) {
    364 		int w;
    365 		/*
    366 		 * Scan Dialers file to find an entry
    367 		 */
    368 		if ((w = gdial(dev[D_CALLER], args, D_MAX)) < 1) {
    369 			logent("generic call to gdial", "FAILED");
    370 			Uerror = SS_CANT_ACCESS_DEVICE;
    371 			goto bad;
    372 		}
    373 		if (w <= 2)	/* do nothing - no chat */
    374 			break;
    375 		/*
    376 		 * Translate the phone number
    377 		 */
    378 		if (dev[D_ARG] == NULL) {
    379 			/* if NULL - assume no translation */
    380 			dev[D_ARG+1] = NULL; /* needed for for loop to mark the end */
    381 			dev[D_ARG] = "\\D";
    382 		}
    383 
    384 		phonecl = repphone(dev[D_ARG], flds[F_PHONE], args[1]);
    385 		exphone(phonecl, phoneex);
    386 		translate(args[1], phoneex);
    387 		/*
    388 		 * Chat
    389 		 */
    390 		if (chat(w-2, &args[2], dcf, phonecl, phoneex) != SUCCESS) {
    391 			CDEBUG(5, "\nCHAT gdial(%s) FAILED\n", dev[D_CALLER]);
    392 			Uerror = SS_CHAT_FAILED;
    393 			goto bad;
    394 		}
    395 	}
    396 	/*
    397 	 * Success at last!
    398 	 */
    399 	strcpy(Dc, sdev[D_LINE]);
    400 	return(dcf);
    401 bad:
    402 	if ( dcf >= 0 ) {
    403 		/* reset line settings if we got them in the beginning */
    404 		if ( ret_orig == 0 )
    405 			(void) ioctl(dcf, TCSETAW, &tty_orig);
    406 		fd_rmlock(dcf);
    407 		(void)close(dcf);
    408 	}
    409 	/*	restore vanilla unix interface	*/
    410 	(void)interface("UNIX");
    411 	return(FAIL);
    412 }
    413 
    414 /*
    415  * clear_hup()	clear the hangup state of the given device
    416  */
    417 GLOBAL int
    418 clear_hup(dcf)
    419 int dcf;
    420 {
    421 	int ndcf;
    422 	if ((ndcf = open(saved_dcname, saved_mode)) < 0) {
    423 		return (FAIL);
    424 	}
    425 	if (ndcf != dcf) {
    426 		close(ndcf);
    427 	}
    428 	return (SUCCESS);
    429 }
    430 
    431 
    432 /*
    433  * translate the pairs of characters present in the first
    434  * string whenever the first of the pair appears in the second
    435  * string.
    436  */
    437 static void
    438 translate(ttab, str)
    439 char *ttab, *str;
    440 {
    441 	char *s;
    442 
    443 	for(;*ttab && *(ttab+1); ttab += 2)
    444 		for(s=str;*s;s++)
    445 			if(*ttab == *s)
    446 				*s = *(ttab+1);
    447 	return;
    448 }
    449 
    450 #define MAXLINE	512
    451 /*
    452  * Get the information about the dialer.
    453  * gdial(type, arps, narps)
    454  *	type	-> type of dialer (e.g., penril)
    455  *	arps	-> array of pointers returned by gdial
    456  *	narps	-> number of elements in array returned by gdial
    457  * Return value:
    458  *	-1	-> Can't open DIALERFILE
    459  *	0	-> requested type not found
    460  *	>0	-> success - number of fields filled in
    461  */
    462 static int
    463 gdial(type, arps, narps)
    464 char *type, *arps[];
    465 int narps;
    466 {
    467 	static char info[MAXLINE];
    468 	int na;
    469 	EXTERN void dialreset();
    470 	EXTERN char * currdial();
    471 
    472 	DEBUG(2, "gdial(%s) called\n", type);
    473 	while (getdialline(info, sizeof(info))) {
    474 		if ((info[0] == '#') || (info[0] == ' ') ||
    475 		    (info[0] == '\t') || (info[0] == '\n'))
    476 			continue;
    477 		if ((na = getargs(info, arps, narps)) == 0)
    478 			continue;
    479 		if (EQUALS(arps[0], type)) {
    480 		    DEBUG(5, "Trying caller script '%s'", type);
    481 		    DEBUG(5, " from '%s'.\n", currdial());
    482 		    dialreset();
    483 		    bsfix(arps);
    484 		    return(na);
    485 		}
    486 	}
    487 	DEBUG(1, "%s not found in Dialers file\n", type);
    488 	dialreset();
    489 	return(0);
    490 }
    491 
    492 
    493 #ifdef DATAKIT
    494 
    495 /*
    496  *	dkcall(flds, dev)	make a DATAKIT VCS connection
    497  *				  DATAKIT VCS is a trademark of AT&T
    498  *
    499  *	return codes:
    500  *		>0 - file number - ok
    501  *		FAIL - failed
    502  */
    503 
    504 #include "dk.h"
    505 EXTERN int dkdial();
    506 
    507 /*ARGSUSED*/
    508 GLOBAL int
    509 dkcall(flds, dev)
    510 char *flds[], *dev[];
    511 {
    512 	int fd;
    513 #ifdef V8
    514 	extern int cdkp_ld;
    515 #endif
    516 
    517 	char	dialstring[64];
    518 	EXTERN	void dkbreak();
    519 
    520 	strcpy(dialstring, dev[D_ARG]);
    521 	DEBUG(4, "dkcall(%s)\n", dialstring);
    522 
    523 
    524 #ifdef V8
    525 	if (setjmp(Sjbuf)) {
    526 		Uerror = SS_DIAL_FAILED;
    527 		return(FAIL);
    528 	}
    529 
    530 	(void) signal(SIGALRM, alarmtr);
    531 	(void) alarm(connecttime);
    532 	DEBUG(4, "tdkdial(%s", flds[F_PHONE]);
    533 	DEBUG(4, ", %d)\n", atoi(dev[D_CLASS]));
    534     	if ((fd = tdkdial(flds[F_PHONE], atoi(dev[D_CLASS]))) >= 0)
    535 	    if (dkproto(fd, cdkp_ld) < 0)
    536 	       {
    537 	    	close(fd);
    538 	    	fd = -1;
    539 	       }
    540 	(void) alarm(0);
    541 #else
    542 	fd = dkdial(dialstring);
    543 #endif
    544 
    545 	(void) strcpy(Dc, "DK");
    546 	if (fd < 0) {
    547 		Uerror = SS_DIAL_FAILED;
    548 		return(FAIL);
    549 	}
    550 	else {
    551 		genbrk = dkbreak;
    552 		return(fd);
    553 	}
    554 }
    555 
    556 #endif /* DATAKIT */
    557 
    558 #ifdef TCP
    559 
    560 /*
    561  *	tcpcall(flds, dev)	make ethernet/socket connection
    562  *
    563  *	return codes:
    564  *		>0 - file number - ok
    565  *		FAIL - failed
    566  */
    567 
    568 #if !(defined(BSD4_2) || defined(ATTSVR4))
    569 /*ARGSUSED*/
    570 GLOBAL int
    571 tcpcall(flds, dev)
    572 char	*flds[], *dev[];
    573 {
    574 	Uerror = SS_NO_DEVICE;
    575 	return(FAIL);
    576 }
    577 #else /* BSD4_2 */
    578 /*ARGSUSED*/
    579 GLOBAL int
    580 tcpcall(flds, dev)
    581 char *flds[], *dev[];
    582 {
    583 	int ret;
    584 	short port;
    585 	struct servent *sp;
    586 	struct hostent *hp;
    587 	struct sockaddr_in sin;
    588 
    589 	if (EQUALS(flds[F_CLASS], "-")) {
    590 		/*
    591 		 * Use standard UUCP port number.
    592 		 */
    593 		sp = getservbyname("uucp", "tcp");
    594 		endservent();
    595 		ASSERT(sp != NULL, "No uucp service number", 0, 0);
    596 		port = sp->s_port;
    597 	} else {
    598 		/*
    599 		 * Systems file specifies a port number.
    600 		 */
    601 		sp = getservbyname(flds[F_CLASS], "tcp");
    602 		endservent();
    603 		if (sp == NULL) {
    604 			port = htons(atoi(flds[F_CLASS]));
    605 			if (port == 0) {
    606 				logent("tcpopen", "unknown port number");
    607 				Uerror = SS_NO_DEVICE;
    608 				return(FAIL);
    609 			}
    610 		} else
    611 			port = sp->s_port;
    612 	}
    613 	if (EQUALS(flds[F_PHONE], "-")) {
    614 		/*
    615 		 * Use UUCP name as host name.
    616 		 */
    617 		hp = gethostbyname(flds[F_NAME]);
    618 	} else {
    619 		/*
    620 		 * Systems file specifies a host name different from the UUCP
    621 		 * host name.
    622 		 */
    623 		hp = gethostbyname(flds[F_PHONE]);
    624 	}
    625 	endhostent();
    626 	if (hp == NULL) {
    627 		logent("tcpopen", "no such host");
    628 		Uerror = SS_NO_DEVICE;
    629 		return(FAIL);
    630 	}
    631 	DEBUG(4, "tcpdial host %s, ", hp->h_name);
    632 	DEBUG(4, "port %d\n", ntohs(port));
    633 
    634 	ret = socket(AF_INET, SOCK_STREAM, 0);
    635 	if (ret < 0) {
    636 		DEBUG(5, "no socket: %s\n", strerror(errno));
    637 		logent("no socket", strerror(errno));
    638 		Uerror = SS_NO_DEVICE;
    639 		return(FAIL);
    640 	}
    641 	sin.sin_family = hp->h_addrtype;
    642 #ifdef BSD4_2
    643 	bcopy(hp->h_addr, (caddr_t)&sin.sin_addr, hp->h_length);
    644 #else
    645 	memcpy((caddr_t)&sin.sin_addr, hp->h_addr, hp->h_length);
    646 #endif
    647 	sin.sin_port = port;
    648 	if (setjmp(Sjbuf)) {
    649 		DEBUG(4, "timeout tcpopen\n%s", "");
    650 		logent("tcpopen", "TIMEOUT");
    651 		Uerror = SS_NO_DEVICE;
    652 		return(FAIL);
    653 	}
    654 	(void) signal(SIGALRM, alarmtr);
    655 	(void) alarm(connecttime);
    656 	DEBUG(7, "family: %d\n", sin.sin_family);
    657 	DEBUG(7, "port: %d\n", sin.sin_port);
    658 	DEBUG(7, "addr: %08x\n",*((int *) &sin.sin_addr));
    659 	if (connect(ret, (struct sockaddr *)&sin, sizeof (sin)) < 0) {
    660 		(void) alarm(0);
    661 		(void) close(ret);
    662 		DEBUG(5, "connect failed: %s\n", strerror(errno));
    663 		logent("connect failed", strerror(errno));
    664 		Uerror = SS_NO_DEVICE;
    665 		return(FAIL);
    666 	}
    667 	(void) signal(SIGPIPE, SIG_IGN);  /* watch out for broken ipc link...*/
    668 	(void) alarm(0);
    669 	(void) strcpy(Dc, "IPC");
    670 	return(ret);
    671 }
    672 
    673 #endif /* BSD4_2 */
    674 
    675 /*
    676  *	unetcall(flds, dev)	make ethernet connection
    677  *
    678  *	return codes:
    679  *		>0 - file number - ok
    680  *		FAIL - failed
    681  */
    682 
    683 #ifndef UNET
    684 /*ARGSUSED*/
    685 GLOBAL int
    686 unetcall(flds, dev)
    687 char	*flds[], *dev[];
    688 {
    689 	Uerror = SS_NO_DEVICE;
    690 	return(FAIL);
    691 }
    692 #else /* UNET */
    693 GLOBAL int
    694 unetcall(flds, dev)
    695 char *flds[], *dev[];
    696 {
    697 	int ret;
    698 	int port;
    699 
    700 	port = atoi(dev[D_ARG]);
    701 	DEBUG(4, "unetdial host %s, ", flds[F_PHONE]);
    702 	DEBUG(4, "port %d\n", port);
    703 	(void) alarm(connecttime);
    704 	ret = tcpopen(flds[F_PHONE], port, 0, TO_ACTIVE, "rw");
    705 	(void) alarm(0);
    706 	endhnent();
    707 	if (ret < 0) {
    708 		DEBUG(5, "tcpopen failed: errno %d\n", errno);
    709 		Uerror = SS_DIAL_FAILED;
    710 		return(FAIL);
    711 	}
    712 	(void) strcpy(Dc, "UNET");
    713 	return(ret);
    714 }
    715 #endif /* UNET */
    716 
    717 #endif /* TCP */
    718 
    719 #ifdef SYTEK
    720 
    721 /*
    722  *	sytcall(flds, dev)	make a sytek connection
    723  *
    724  *	return codes:
    725  *		>0 - file number - ok
    726  *		FAIL - failed
    727  */
    728 
    729 /*ARGSUSED*/
    730 GLOBAL int
    731 sytcall(flds, dev)
    732 char *flds[], *dev[];
    733 {
    734 	int dcr, dcr2, nullfd, ret;
    735 	char dcname[20], command[BUFSIZ];
    736 
    737 	(void) sprintf(dcname, "/dev/%s", dev[D_LINE]);
    738 	DEBUG(4, "dc - %s, ", dcname);
    739 	dcr = open(dcname, O_WRONLY|O_NDELAY);
    740 	if (dcr < 0) {
    741 		Uerror = SS_DIAL_FAILED;
    742 		DEBUG(4, "OPEN FAILED %s\n", dcname);
    743 		return(FAIL);
    744 	}
    745 	if ( fd_mklock(dcr) != SUCCESS ) {
    746 		(void)close(dcr);
    747 		DEBUG(1, "failed to lock device %s\n", dcname);
    748 		Uerror = SS_LOCKED_DEVICE;
    749 		return(FAIL);
    750 	}
    751 
    752 	sytfixline(dcr, atoi(fdig(dev[D_CLASS])), D_DIRECT);
    753 	(void) sleep(2);
    754 	DEBUG(4, "Calling Sytek unit %s\n", dev[D_ARG]);
    755 	(void) sprintf(command,"\r\rcall %s\r", dev[D_ARG]);
    756 	ret = (*Write)(dcr, command, strlen(command));
    757 	(void) sleep(1);
    758 	DEBUG(4, "COM1 return = %d\n", ret);
    759 	sytfix2line(dcr);
    760 	(void) close(nullfd = open("/", O_RDONLY));
    761 	(void) signal(SIGALRM, alarmtr);
    762 	if (setjmp(Sjbuf)) {
    763 		DEBUG(4, "timeout sytek open\n%s", "");
    764 		(void) close(nullfd);
    765 		(void) close(dcr2);
    766 		fd_rmlock(dcr);
    767 		(void) close(dcr);
    768 		Uerror = SS_DIAL_FAILED;
    769 		return(FAIL);
    770 	}
    771 	(void) alarm(10);
    772 	dcr2 = open(dcname,O_RDWR);
    773 	(void) alarm(0);
    774 	fd_rmlock(dcr);
    775 	(void) close(dcr);
    776 	if (dcr2 < 0) {
    777 		DEBUG(4, "OPEN 2 FAILED %s\n", dcname);
    778 		Uerror = SS_DIAL_FAILED;
    779 		(void) close(nullfd);	/* kernel might think dc2 is open */
    780 		return(FAIL);
    781 	}
    782 	if ( fd_mklock(dcr2) != SUCCESS ) {
    783 		(void)close(dcr2);
    784 		DEBUG(1, "failed to lock device %s\n", dcname);
    785 		Uerror = SS_LOCKED_DEVICE;
    786 		return(FAIL);
    787 	return(dcr2);
    788 }
    789 
    790 #endif /* SYTEK */
    791 
    792 #ifdef DIAL801
    793 
    794 /*
    795  *	dial801(flds, dev)	dial remote machine on 801/801
    796  *	char *flds[], *dev[];
    797  *
    798  *	return codes:
    799  *		file descriptor  -  succeeded
    800  *		FAIL  -  failed
    801  *
    802  *	unfortunately, open801() is different for usg and non-usg
    803  */
    804 
    805 /*ARGSUSED*/
    806 GLOBAL int
    807 dial801(flds, dev)
    808 char *flds[], *dev[];
    809 {
    810 	char dcname[20], dnname[20], phone[MAXPH+2];
    811 	int dcf = -1, speed;
    812 
    813 	(void) sprintf(dnname, "/dev/%s", dev[D_CALLDEV]);
    814 	(void) sprintf(phone, "%s%s", dev[D_ARG]   , ACULAST);
    815 	(void) sprintf(dcname, "/dev/%s", dev[D_LINE]);
    816 	CDEBUG(1, "Use Port %s, ", dcname);
    817 	DEBUG(4, "acu - %s, ", dnname);
    818 	VERBOSE("Trying modem - %s, ", dcname);	/* for cu */
    819 	VERBOSE("acu - %s, ", dnname);	/* for cu */
    820 	if(getuid()==0 || GRPCHK(getgid())) {
    821 		CDEBUG(1, "Phone Number  %s\n", phone);
    822 		/* In cu, only give out the phone number to trusted people. */
    823 		VERBOSE("calling  %s:  ", phone);	/* for cu */
    824 	}
    825 	speed = atoi(fdig(dev[D_CLASS]));
    826 	dcf = open801(dcname, dnname, phone, speed);
    827 	if (dcf >= 0) {
    828 	        if ( fd_mklock(dcf) != SUCCESS ) {
    829 			(void) close(dcf);
    830 			DEBUG(5, "fd_mklock line %s failed\n", dev[D_LINE]);
    831 			Uerror = SS_LOCKED_DEVICE;
    832 			return(FAIL);
    833 		}
    834 		fixline(dcf, speed, D_ACU);
    835 		(void) strcpy(Dc, dev[D_LINE]);	/* for later unlock() */
    836 		VERBOSE("SUCCEEDED\n%s", "");
    837 	} else {
    838 		VERBOSE("FAILED\n%s", "");
    839 	}
    840 	return(dcf);
    841 }
    842 
    843 
    844 #ifndef ATTSV
    845 /*ARGSUSED*/
    846 GLOBAL int
    847 open801(dcname, dnname, phone, speed)
    848 char *dcname, *dnname, *phone;
    849 {
    850 	int nw, lt, dcf = -1, nullfd, dnf = -1;
    851 	pid_t w_ret, pid = -1;
    852 	unsigned timelim;
    853 
    854 	if ((dnf = open(dnname, O_WRONLY)) < 0) {
    855 		DEBUG(5, "can't open %s\n", dnname);
    856 		Uerror = SS_CANT_ACCESS_DEVICE;
    857 		return(FAIL);
    858 	}
    859 	DEBUG(5, "%s is open\n", dnname);
    860 
    861 	(void) close(nullfd = open("/dev/null", O_RDONLY));/* partial open hack */
    862 	if (setjmp(Sjbuf)) {
    863 		DEBUG(4, "timeout modem open\n%s", "");
    864 		(void) close(nullfd);
    865 		(void) close(dcf);
    866 		(void) close(dnf);
    867 		logent("801 open", "TIMEOUT");
    868 		if (pid > 0) {
    869 			kill(pid, 9);
    870 			wait((int *) 0);
    871 		}
    872 		Uerror = SS_DIAL_FAILED;
    873 		return(FAIL);
    874 	}
    875 	(void) signal(SIGALRM, alarmtr);
    876 	timelim = 5 * strlen(phone);
    877 	(void) alarm(timelim < connecttime ? connecttime : timelim);
    878 	if ((pid = fork()) == 0) {
    879 		sleep(2);
    880 		nw = (*Write)(dnf, phone, lt = strlen(phone));
    881 		if (nw != lt) {
    882 			DEBUG(4, "ACU write error %d\n", errno);
    883 			logent("ACU write", "FAILED");
    884 			exit(1);
    885 		}
    886 		DEBUG(4, "ACU write ok\n%s", "");
    887 		exit(0);
    888 	}
    889 	/*  open line - will return on carrier */
    890 	dcf = open(dcname, O_RDWR);
    891 
    892 	DEBUG(4, "dcf is %d\n", dcf);
    893 	if (dcf < 0) {	/* handle like a timeout */
    894 		(void) alarm(0);
    895 		longjmp(Sjbuf, 1);
    896 	}
    897 
    898 	/* modem is open */
    899 	while ((w_ret = wait(&lt)) != pid)
    900 		if (w_ret == -1 && errno != EINTR) {
    901 			DEBUG(4, "Wait failed errno=%d\n", errno);
    902 			(void) close(dcf);
    903 			(void) close(dnf);
    904 			Uerror = SS_DIAL_FAILED;
    905 			return(FAIL);
    906 		}
    907 	(void) alarm(0);
    908 
    909 	(void) close(dnf);	/* no reason to keep the 801 open */
    910 	if (lt != 0) {
    911 		DEBUG(4, "Fork Stat %o\n", lt);
    912 		(void) close(dcf);
    913 		Uerror = SS_DIAL_FAILED;
    914 		return(FAIL);
    915 	}
    916 	return(dcf);
    917 }
    918 
    919 #else /* ATTSV */
    920 
    921 GLOBAL int
    922 open801(dcname, dnname, phone, speed)
    923 char *dcname, *dnname, *phone;
    924 {
    925 	int nw, lt, dcf = -1, nullfd, dnf = -1, ret;
    926 	unsigned timelim;
    927 
    928 	(void) close(nullfd = open("/", O_RDONLY));	/* partial open hack */
    929 	if (setjmp(Sjbuf)) {
    930 		DEBUG(4, "DN write %s\n", "timeout");
    931 		(void) close(dnf);
    932 		(void) close(dcf);
    933 		(void) close(nullfd);
    934 		Uerror = SS_DIAL_FAILED;
    935 		return(FAIL);
    936 	}
    937 	(void) signal(SIGALRM, alarmtr);
    938 	timelim = 5 * strlen(phone);
    939 	(void) alarm(timelim < connecttime ? connecttime : timelim);
    940 
    941 	if ((dnf = open(dnname, O_WRONLY)) < 0 ) {
    942 		DEBUG(5, "can't open %s\n", dnname);
    943 		Uerror = SS_CANT_ACCESS_DEVICE;
    944 		return(FAIL);
    945 	}
    946 	DEBUG(5, "%s is open\n", dnname);
    947 	if ( fd_mklock(dnf) != SUCCESS ) {
    948 		(void)close(dnf);
    949 		DEBUG(1, "failed to lock device %s\n", dnname);
    950 		Uerror = SS_LOCKED_DEVICE;
    951 	}
    952 	if (  (dcf = open(dcname, O_RDWR | O_NDELAY)) < 0 ) {
    953 		DEBUG(5, "can't open %s\n", dcname);
    954 		Uerror = SS_CANT_ACCESS_DEVICE;
    955 		return(FAIL);
    956 	}
    957 	if ( fd_mklock(dcf) != SUCCESS ) {
    958 		(void)close(dcf);
    959 		DEBUG(1, "failed to lock device %s\n", dcname);
    960 		Uerror = SS_LOCKED_DEVICE;
    961 		return(FAIL);
    962 	}
    963 
    964 	DEBUG(4, "dcf is %d\n", dcf);
    965 	fixline(dcf, speed, D_ACU);
    966 	nw = (*Write)(dnf, phone, lt = strlen(phone));
    967 	if (nw != lt) {
    968 		(void) alarm(0);
    969 		DEBUG(4, "ACU write error %d\n", errno);
    970 		(void) close(dnf);
    971 		(void) close(dcf);
    972 		Uerror = SS_DIAL_FAILED;
    973 		return(FAIL);
    974 	} else
    975 		DEBUG(4, "ACU write ok\n%s", "");
    976 
    977 	(void) close(dnf);
    978 	(void) close(nullfd = open("/", O_RDONLY));	/* partial open hack */
    979 	ret = open(dcname, O_RDWR);  /* wait for carrier  */
    980 	(void) alarm(0);
    981 	(void) close(ret);	/* close 2nd modem open() */
    982 	if (ret < 0) {		/* open() interrupted by alarm */
    983 		DEBUG(4, "Line open %s\n", "failed");
    984 		Uerror = SS_DIAL_FAILED;
    985 		(void) close(nullfd);		/* close partially opened modem */
    986 		return(FAIL);
    987 	}
    988 	(void) fcntl(dcf,F_SETFL, fcntl(dcf, F_GETFL, 0) & ~O_NDELAY);
    989 	return(dcf);
    990 }
    991 #endif /* ATTSV */
    992 
    993 #endif /* DIAL801 */
    994 
    995 #ifdef V8
    996 GLOBAL int
    997 Dialout(flds)
    998 char *flds[];
    999 {
   1000     int fd;
   1001     char phone[MAXPH+2];
   1002 
   1003     exphone(flds[F_PHONE], phone);
   1004 
   1005     DEBUG(4, "call dialout(%s", phone);
   1006     DEBUG(4, ", %s)\n", dev[D_CLASS]);
   1007     fd = dialout(phone, dev[D_CLASS]);
   1008     if (fd == -1)
   1009 	Uerror = SS_NO_DEVICE;
   1010     if (fd == -3)
   1011 	Uerror = SS_DIAL_FAILED;
   1012     if (fd == -9)
   1013 	Uerror = SS_DEVICE_FAILED;
   1014 
   1015     (void) strcpy(Dc, "Dialout");
   1016 
   1017     return(fd);
   1018 }
   1019 #endif /* V8 */
   1020 
   1021 #ifdef TLI
   1022 /*
   1023  *
   1024  * AT&T Transport Layer Interface
   1025  *
   1026  * expected in Devices
   1027  *	TLI line1 - - TLI
   1028  * or
   1029  *	TLIS line1 - - TLIS
   1030  *
   1031  */
   1032 
   1033 #include <sys/tiuser.h>
   1034 
   1035 EXTERN void tfaillog();
   1036 
   1037 char *t_alloc();
   1038 int t_bind(), t_close(), t_connect(), t_free(), t_look(), t_open(), t_rcvdis();
   1039 
   1040 #define	CONNECT_ATTEMPTS	3
   1041 #define	TFREE(p, type)	if ((p)) t_free((char *)(p), (type))
   1042 
   1043 /*
   1044  * returns fd to remote uucp daemon
   1045  */
   1046 /*ARGSUSED*/
   1047 GLOBAL int
   1048 tlicall(flds, dev)
   1049 char *flds[];
   1050 char *dev[];
   1051 {
   1052 	char		addrbuf[ BUFSIZ ];
   1053 	char		devname[MAXNAMESIZE];
   1054 	int		fd;
   1055 	int	i, j;
   1056 	struct t_bind	*bind_ret = 0;
   1057 	struct t_info	tinfo;
   1058 	struct t_call	*sndcall = 0, *rcvcall = 0;
   1059 	extern int	t_errno;
   1060 
   1061 	EXTERN struct netbuf	*stoa();
   1062 
   1063 	if ( dev[D_LINE][0] != '/' ) {
   1064 		/*	dev holds device name relative to /dev	*/
   1065 		sprintf(devname, "/dev/%s", dev[D_LINE]);
   1066 	} else {
   1067 		/*	dev holds full path name of device	*/
   1068 		strcpy(devname, dev[D_LINE]);
   1069 	}
   1070 	/* gimme local transport endpoint */
   1071 	errno = t_errno = 0;
   1072 	if (setjmp(Sjbuf)) {
   1073 		DEBUG(1, "t_open timeout\n%s", "");
   1074 		logent("t_open", "TIMEOUT");
   1075 		Uerror = SS_NO_DEVICE;
   1076 		return(FAIL);
   1077 	}
   1078 	(void) signal(SIGALRM, alarmtr);
   1079 	(void) alarm(5);
   1080 	fd = t_open(devname, O_RDWR, &tinfo);
   1081 	(void) alarm(0);
   1082 	if (fd < 0) {
   1083 		tfaillog(fd, "t_open" );
   1084 		Uerror = SS_NO_DEVICE;
   1085 		return(FAIL);
   1086 	}
   1087 	if ( fd_mklock(fd) != SUCCESS ) {
   1088 		(void)t_close(fd);
   1089 		DEBUG(1, "tlicall: failed to lock device %s\n", devname);
   1090 		Uerror = SS_LOCKED_DEVICE;
   1091 		return(FAIL);
   1092 	}
   1093 
   1094 	/* allocate tli structures	*/
   1095 	errno = t_errno = 0;
   1096 	if ( (bind_ret = (struct t_bind *)t_alloc(fd, T_BIND, T_ALL)) ==
   1097 	    (struct t_bind *)NULL
   1098 	|| (sndcall = (struct t_call *)t_alloc(fd, T_CALL, T_ALL</