1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 27 /* 28 * bscv.c - multi-threaded lom driver for the Stiletto platform. 29 */ 30 31 /* 32 * Included files. 33 */ 34 35 #include <sys/note.h> 36 #include <sys/types.h> 37 #include <sys/param.h> 38 #include <sys/uio.h> 39 #include <sys/open.h> 40 #include <sys/cred.h> 41 #include <sys/stream.h> 42 #include <sys/systm.h> 43 #include <sys/conf.h> 44 #include <sys/reboot.h> 45 #include <sys/modctl.h> 46 #include <sys/mkdev.h> 47 #include <sys/errno.h> 48 #include <sys/debug.h> 49 #include <sys/kmem.h> 50 #include <sys/consdev.h> 51 #include <sys/file.h> 52 #include <sys/stat.h> 53 #include <sys/disp.h> 54 #include <sys/ddi.h> 55 #include <sys/sunddi.h> 56 #include <sys/stream.h> 57 #include <sys/strlog.h> 58 #include <sys/log.h> 59 #include <sys/utsname.h> 60 #include <sys/callb.h> 61 #include <sys/sysevent.h> 62 #include <sys/nvpair.h> 63 #include <sys/sysevent/eventdefs.h> 64 #include <sys/sysevent/domain.h> 65 #include <sys/sysevent/env.h> 66 #include <sys/sysevent/dr.h> 67 68 #include <sys/lom_io.h> 69 #include <sys/bscbus.h> 70 #include <sys/bscv_impl.h> 71 72 /* 73 * Variables defined here and visible internally only 74 */ 75 76 static void *bscv_statep = NULL; 77 78 /* 79 * Forward declarations 80 */ 81 82 static int bscv_getinfo(dev_info_t *, ddi_info_cmd_t, void *, void **); 83 static int bscv_attach(dev_info_t *, ddi_attach_cmd_t); 84 static int bscv_detach(dev_info_t *, ddi_detach_cmd_t); 85 static int bscv_quiesce(dev_info_t *); 86 static int bscv_map_regs(bscv_soft_state_t *); 87 static void bscv_unmap_regs(bscv_soft_state_t *); 88 static void bscv_map_chan_logical_physical(bscv_soft_state_t *); 89 90 static int bscv_open(dev_t *, int, int, cred_t *); 91 static int bscv_close(dev_t, int, int, cred_t *); 92 static void bscv_full_stop(bscv_soft_state_t *); 93 94 static void bscv_enter(bscv_soft_state_t *); 95 static int bscv_tryenter(bscv_soft_state_t *ssp); 96 static void bscv_exit(bscv_soft_state_t *); 97 #ifdef DEBUG 98 static int bscv_held(bscv_soft_state_t *); 99 #endif /* DEBUG */ 100 101 static void bscv_put8(bscv_soft_state_t *, int, bscv_addr_t, uint8_t); 102 static void bscv_put16(bscv_soft_state_t *, int, bscv_addr_t, uint16_t); 103 static void bscv_put32(bscv_soft_state_t *, int, bscv_addr_t, uint32_t); 104 static uint8_t bscv_get8(bscv_soft_state_t *, int, bscv_addr_t); 105 static uint16_t bscv_get16(bscv_soft_state_t *, int, bscv_addr_t); 106 static uint32_t bscv_get32(bscv_soft_state_t *, int, bscv_addr_t); 107 static void bscv_setclear8(bscv_soft_state_t *, int, 108 bscv_addr_t, uint8_t, uint8_t); 109 static void bscv_setclear8_volatile(bscv_soft_state_t *, int, 110 bscv_addr_t, uint8_t, uint8_t); 111 static void bscv_rep_rw8(bscv_soft_state_t *, int, 112 uint8_t *, bscv_addr_t, size_t, uint_t, boolean_t); 113 static uint8_t bscv_get8_cached(bscv_soft_state_t *, bscv_addr_t); 114 115 static uint8_t bscv_get8_locked(bscv_soft_state_t *, int, bscv_addr_t, int *); 116 static void bscv_rep_get8_locked(bscv_soft_state_t *, int, 117 uint8_t *, bscv_addr_t, size_t, uint_t, int *); 118 119 static boolean_t bscv_faulty(bscv_soft_state_t *); 120 static void bscv_clear_fault(bscv_soft_state_t *); 121 static void bscv_set_fault(bscv_soft_state_t *); 122 static boolean_t bscv_session_error(bscv_soft_state_t *); 123 static int bscv_retcode(bscv_soft_state_t *); 124 static int bscv_should_retry(bscv_soft_state_t *); 125 static void bscv_locked_result(bscv_soft_state_t *, int *); 126 127 static void bscv_put8_once(bscv_soft_state_t *, int, bscv_addr_t, uint8_t); 128 static uint8_t bscv_get8_once(bscv_soft_state_t *, int, bscv_addr_t); 129 static uint32_t bscv_probe(bscv_soft_state_t *, int, uint32_t *); 130 static void bscv_resync_comms(bscv_soft_state_t *, int); 131 132 static boolean_t bscv_window_setup(bscv_soft_state_t *); 133 static int bscv_eerw(bscv_soft_state_t *, uint32_t, uint8_t *, 134 unsigned, boolean_t); 135 136 static int bscv_ioctl(dev_t, int, intptr_t, int, cred_t *, int *); 137 static int bscv_ioc_dogstate(bscv_soft_state_t *, intptr_t, int); 138 static int bscv_ioc_psustate(bscv_soft_state_t *, intptr_t, int); 139 static int bscv_ioc_fanstate(bscv_soft_state_t *, intptr_t, int); 140 static int bscv_ioc_fledstate(bscv_soft_state_t *, intptr_t, int); 141 static int bscv_ioc_ledstate(bscv_soft_state_t *, intptr_t, int); 142 static int bscv_ioc_info(bscv_soft_state_t *, intptr_t, int); 143 static int bscv_ioc_mread(bscv_soft_state_t *, intptr_t, int); 144 static int bscv_ioc_volts(bscv_soft_state_t *, intptr_t, int); 145 static int bscv_ioc_stats(bscv_soft_state_t *, intptr_t, int); 146 static int bscv_ioc_temp(bscv_soft_state_t *, intptr_t, int); 147 static int bscv_ioc_cons(bscv_soft_state_t *, intptr_t, int); 148 static int bscv_ioc_eventlog2(bscv_soft_state_t *, intptr_t, int); 149 static int bscv_ioc_info2(bscv_soft_state_t *, intptr_t, int); 150 static int bscv_ioc_test(bscv_soft_state_t *, intptr_t, int); 151 static int bscv_ioc_mprog2(bscv_soft_state_t *, intptr_t, int); 152 static int bscv_ioc_mread2(bscv_soft_state_t *, intptr_t, int); 153 154 static void bscv_event_daemon(void *); 155 static void bscv_start_event_daemon(bscv_soft_state_t *); 156 static int bscv_stop_event_daemon(bscv_soft_state_t *); 157 static int bscv_pause_event_daemon(bscv_soft_state_t *); 158 static void bscv_resume_event_daemon(bscv_soft_state_t *); 159 static void bscv_event_process(bscv_soft_state_t *ssp, boolean_t); 160 static int bscv_event_validate(bscv_soft_state_t *, uint32_t, uint8_t); 161 static void bscv_event_process_one(bscv_soft_state_t *, lom_event_t *); 162 static void bscv_build_eventstring(bscv_soft_state_t *, 163 lom_event_t *, char *, char *); 164 static int bscv_level_of_event(lom_event_t *); 165 static void bscv_status(bscv_soft_state_t *, uint8_t, uint8_t); 166 char *bscv_get_label(char [][MAX_LOM2_NAME_STR], int, int); 167 static void bscv_generic_sysevent(bscv_soft_state_t *, char *, char *, char *, 168 char *, int32_t, char *); 169 static void bscv_sysevent(bscv_soft_state_t *, lom_event_t *); 170 171 static int bscv_prog(bscv_soft_state_t *, intptr_t, int); 172 static int bscv_prog_image(bscv_soft_state_t *, boolean_t, 173 uint8_t *, int, uint32_t); 174 static int bscv_prog_receive_image(bscv_soft_state_t *, lom_prog_t *, 175 uint8_t *, int); 176 static void bscv_leave_programming_mode(bscv_soft_state_t *, boolean_t); 177 static int bscv_prog_stop_lom(bscv_soft_state_t *); 178 static int bscv_prog_start_lom(bscv_soft_state_t *); 179 180 static int bscv_attach_common(bscv_soft_state_t *); 181 static int bscv_cleanup(bscv_soft_state_t *); 182 static void bscv_setup_capability(bscv_soft_state_t *); 183 static int bscv_probe_check(bscv_soft_state_t *); 184 static void bscv_setup_hostname(bscv_soft_state_t *); 185 static void bscv_read_hostname(bscv_soft_state_t *, char *); 186 static void bscv_write_hostname(bscv_soft_state_t *, char *, uint8_t); 187 static void bscv_setup_static_info(bscv_soft_state_t *); 188 static uint8_t bscv_read_env_name(bscv_soft_state_t *, uint8_t, 189 uint8_t, uint8_t, char [][MAX_LOM2_NAME_STR], int); 190 static void bscv_setup_events(bscv_soft_state_t *); 191 192 static void bscv_trace(bscv_soft_state_t *, char, const char *, 193 const char *, ...); 194 195 #ifdef __sparc 196 static void bscv_idi_init(); 197 static void bscv_idi_fini(); 198 static void bscv_idi_new_instance(dev_info_t *dip); 199 static void bscv_idi_clear_err(); 200 void bscv_idi_set(struct bscv_idi_info info); 201 static boolean_t bscv_idi_err(); 202 static boolean_t bscv_nodename_set(struct bscv_idi_info info); 203 static boolean_t bscv_sig_set(struct bscv_idi_info info); 204 static boolean_t bscv_wdog_pat(struct bscv_idi_info info); 205 static boolean_t bscv_wdog_cfg(struct bscv_idi_info info); 206 static void bscv_write_sig(bscv_soft_state_t *ssp, bscv_sig_t s); 207 #endif /* __sparc */ 208 209 static void bscv_setup_watchdog(bscv_soft_state_t *ssp); 210 static void bscv_write_wdog_cfg(bscv_soft_state_t *, 211 uint_t, boolean_t, uint8_t); 212 213 #if defined(__i386) || defined(__amd64) 214 static void bscv_inform_bsc(bscv_soft_state_t *, uint32_t); 215 static void bscv_watchdog_pat_request(void *); 216 static void bscv_watchdog_cfg_request(bscv_soft_state_t *, uint8_t); 217 static uint_t bscv_set_watchdog_timer(bscv_soft_state_t *, uint_t); 218 static void bscv_clear_watchdog_timer(bscv_soft_state_t *); 219 220 static boolean_t bscv_panic_callback(void *, int); 221 static void bscv_watchdog_cyclic_add(bscv_soft_state_t *); 222 static void bscv_watchdog_cyclic_remove(bscv_soft_state_t *); 223 224 static uint8_t wdog_reset_on_timeout = 1; 225 226 #define WDOG_ON 1 227 #define WDOG_OFF 0 228 #define CLK_WATCHDOG_DEFAULT 10 /* 10 seconds */ 229 #define WATCHDOG_PAT_INTERVAL 1000000000 /* 1 second */ 230 231 static int bscv_watchdog_enable; 232 static int bscv_watchdog_available; 233 static int watchdog_activated; 234 static uint_t bscv_watchdog_timeout_seconds; 235 #endif /* __i386 || __amd64 */ 236 237 #ifdef __sparc 238 struct bscv_idi_callout bscv_idi_callout_table[] = { 239 {BSCV_IDI_NODENAME, &bscv_nodename_set }, 240 {BSCV_IDI_SIG, &bscv_sig_set }, 241 {BSCV_IDI_WDOG_PAT, &bscv_wdog_pat }, 242 {BSCV_IDI_WDOG_CFG, &bscv_wdog_cfg }, 243 {BSCV_IDI_NULL, NULL } 244 }; 245 246 static struct bscv_idi_callout_mgr bscv_idi_mgr; 247 #endif /* __sparc */ 248 249 /* 250 * Local Definitions 251 */ 252 #define STATUS_READ_LIMIT 8 /* Read up to 8 status changes at a time */ 253 #define MYNAME "bscv" 254 #define BSCV_INST_TO_MINOR(i) (i) 255 #define BSCV_MINOR_TO_INST(m) (m) 256 257 /* 258 * Strings for daemon event reporting 259 */ 260 261 static char *eventSubsysStrings[] = 262 { "", /* 00 */ 263 "Alarm ", /* 01 */ 264 "temperature sensor ", /* 02 */ 265 "overheat sensor ", /* 03 */ 266 "Fan ", /* 04 */ 267 "supply rail ", /* 05 */ 268 "circuit breaker ", /* 06 */ 269 "PSU ", /* 07 */ 270 "user ", /* 08 */ 271 "phonehome ", /* 09; unutilized */ 272 "LOM ", /* 0a */ 273 "host ", /* 0b */ 274 "event log ", /* 0c */ 275 "", /* 0d; EVENT_SUBSYS_EXTRA unutilized */ 276 "LED ", /* 0e */ 277 }; 278 279 static char *eventTypeStrings[] = 280 { 281 "[null event]", /* 00 */ 282 "ON", /* 01 */ 283 "OFF", /* 02 */ 284 "state change", /* 03 */ 285 "power on", /* 04 */ 286 "power off", /* 05 */ 287 "powered off unexpectedly", /* 06 */ 288 "reset unexpectedly", /* 07 */ 289 "booted", /* 08 */ 290 "watchdog enabled", /* 09 */ 291 "watchdog disabled", /* 0a */ 292 "watchdog triggered", /* 0b */ 293 "failed", /* 0c */ 294 "recovered", /* 0d */ 295 "reset", /* 0e */ 296 "XIR reset", /* 0f */ 297 "console selected", /* 10 */ 298 "time reference", /* 11 */ 299 "script failure", /* 12 */ 300 "modem access failure", /* 13 */ 301 "modem dialing failure", /* 14 */ 302 "bad checksum", /* 15 */ 303 "added", /* 16 */ 304 "removed", /* 17 */ 305 "changed", /* 18 */ 306 "login", /* 19 */ 307 "password changed", /* 1a */ 308 "login failed", /* 1b */ 309 "logout", /* 1c */ 310 "flash download", /* 1d */ 311 "data lost", /* 1e */ 312 "device busy", /* 1f */ 313 "fault led state", /* 20 */ 314 "overheat", /* 21 */ 315 "severe overheat", /* 22 */ 316 "no overheat", /* 23 */ 317 "SCC", /* 24 */ 318 "device inaccessible", /* 25 */ 319 "Hostname change", /* 26 */ 320 "CPU signature timeout", /* 27 */ 321 "Bootmode change", /* 28 */ 322 "Watchdog change policy", /* 29 */ 323 "Watchdog change timeout", /* 2a */ 324 }; 325 326 /* 327 * These store to mapping between the logical service, e.g. chan_prog for 328 * programming, and the actual Xbus channel which carries that traffic. 329 * Any services can be shared on the same channel apart from chan_wdogpat. 330 */ 331 static int chan_general; /* General Traffic */ 332 static int chan_wdogpat; /* Watchdog Patting */ 333 static int chan_cpusig; /* CPU signatures */ 334 static int chan_eeprom; /* EEPROM I/O */ 335 static int chan_prog; /* Programming */ 336 337 /* 338 * cb_ops structure defining the driver entry points 339 */ 340 341 static struct cb_ops bscv_cb_ops = { 342 bscv_open, /* open */ 343 bscv_close, /* close */ 344 nodev, /* strategy */ 345 nodev, /* print */ 346 nodev, /* dump */ 347 nodev, /* read */ 348 nodev, /* write */ 349 bscv_ioctl, /* ioctl */ 350 nodev, /* devmap */ 351 nodev, /* mmap */ 352 nodev, /* segmap */ 353 nochpoll, /* poll */ 354 ddi_prop_op, /* prop op */ 355 NULL, /* ! STREAMS */ 356 D_NEW | D_MP /* MT/MP Safe */ 357 }; 358 359 /* 360 * dev_ops structure defining autoconfiguration driver autoconfiguration 361 * routines 362 */ 363 364 static struct dev_ops bscv_dev_ops = { 365 DEVO_REV, /* devo_rev */ 366 0, /* devo_refcnt */ 367 bscv_getinfo, /* devo_getinfo */ 368 nulldev, /* devo_identify */ 369 nulldev, /* devo_probe */ 370 bscv_attach, /* devo_attach */ 371 bscv_detach, /* devo_detach */ 372 nodev, /* devo_reset */ 373 &bscv_cb_ops, /* devo_cb_ops */ 374 (struct bus_ops *)0, /* devo_bus_ops */ 375 NULL, /* devo_power */ 376 bscv_quiesce, /* devo_quiesce */ 377 }; 378 379 /* 380 * module configuration section 381 */ 382 383 #ifdef DEBUG 384 #define BSCV_VERSION_STRING "bscv driver - Debug" 385 #else /* DEBUG */ 386 #define BSCV_VERSION_STRING "bscv driver" 387 #endif /* DEBUG */ 388 389 static struct modldrv modldrv = { 390 &mod_driverops, 391 BSCV_VERSION_STRING, 392 &bscv_dev_ops, 393 }; 394 395 static struct modlinkage modlinkage = { 396 MODREV_1, 397 &modldrv, 398 NULL 399 }; 400 401 #ifdef DEBUG 402 /* Tracing is enabled if value is non-zero. */ 403 static int bscv_trace_flag = 1; 404 405 #define BSCV_TRACE if (bscv_trace_flag != 0) bscv_trace 406 #else 407 #define BSCV_TRACE 408 #endif 409 410 /* 411 * kernel accessible routines. These routines are necessarily global so the 412 * driver can be loaded, and unloaded successfully 413 */ 414 415 /* 416 * function - _init 417 * description - initializes the driver state structure and installs the 418 * driver module into the kernel 419 * inputs - none 420 * outputs - success or failure of module installation 421 */ 422 423 int 424 _init(void) 425 { 426 register int e; 427 428 if ((e = ddi_soft_state_init(&bscv_statep, 429 sizeof (bscv_soft_state_t), 1)) != 0) { 430 return (e); 431 } 432 433 if ((e = mod_install(&modlinkage)) != 0) { 434 ddi_soft_state_fini(&bscv_statep); 435 } 436 437 #ifdef __sparc 438 if (e == 0) bscv_idi_init(); 439 #endif /* __sparc */ 440 return (e); 441 } 442 443 /* 444 * function - _info 445 * description - provide information about a kernel loaded module 446 * inputs - module infomation 447 * outputs - success or failure of information request 448 */ 449 450 int 451 _info(struct modinfo *modinfop) 452 { 453 return (mod_info(&modlinkage, modinfop)); 454 } 455 456 /* 457 * function - _fini 458 * description - removes a module from the kernel and frees the driver soft 459 * state memory 460 * inputs - none 461 * outputs - success or failure of module removal 462 */ 463 464 int 465 _fini(void) 466 { 467 register int e; 468 469 if ((e = mod_remove(&modlinkage)) != 0) { 470 return (e); 471 } 472 473 #ifdef __sparc 474 bscv_idi_fini(); 475 #endif /* __sparc */ 476 ddi_soft_state_fini(&bscv_statep); 477 478 return (e); 479 } 480 481 /* 482 * function - bscv_getinfo 483 * description - routine used to provide information on the driver 484 * inputs - device information structure, command, command arg, storage 485 * area for the result 486 * outputs - DDI_SUCCESS or DDI_FAILURE 487 */ 488 489 /*ARGSUSED*/ 490 static int 491 bscv_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **result) 492 { 493 bscv_soft_state_t *ssp; 494 dev_t dev = (dev_t)arg; 495 int instance; 496 int error; 497 498 instance = DEVICETOINSTANCE(dev); 499 500 switch (cmd) { 501 case DDI_INFO_DEVT2INSTANCE: 502 *result = (void *)(uintptr_t)instance; 503 error = DDI_SUCCESS; 504 break; 505 506 case DDI_INFO_DEVT2DEVINFO: 507 ssp = ddi_get_soft_state(bscv_statep, instance); 508 if (ssp == NULL) 509 return (DDI_FAILURE); 510 *result = (void *) ssp->dip; 511 error = DDI_SUCCESS; 512 break; 513 514 default: 515 error = DDI_FAILURE; 516 break; 517 } 518 519 return (error); 520 } 521 522 #ifdef __sparc 523 void 524 bscv_idi_init() 525 { 526 bscv_idi_mgr.valid_inst = (uint32_t)~0; /* No valid instances */ 527 bscv_idi_mgr.tbl = bscv_idi_callout_table; 528 bscv_idi_mgr.errs = 0; 529 530 /* 531 * Now that all fields are initialized, set the magic flag. This is 532 * a kind of integrity check for the data structure. 533 */ 534 bscv_idi_mgr.magic = BSCV_IDI_CALLOUT_MAGIC; 535 } 536 537 static void 538 bscv_idi_clear_err() 539 { 540 ASSERT(bscv_idi_mgr.magic == BSCV_IDI_CALLOUT_MAGIC); 541 542 bscv_idi_mgr.errs = 0; 543 } 544 545 /* 546 * function - bscv_idi_err 547 * description - error messaging service which throttles the number of error 548 * messages to avoid overflowing storage 549 * inputs - none 550 * returns - boolean to indicate whether a message should be reported 551 * side-effects - updates the error number counter 552 */ 553 static boolean_t 554 bscv_idi_err() 555 { 556 ASSERT(bscv_idi_mgr.magic == BSCV_IDI_CALLOUT_MAGIC); 557 558 bscv_idi_mgr.errs++; 559 560 if (bscv_idi_mgr.errs++ < BSCV_IDI_ERR_MSG_THRESHOLD) 561 return (B_TRUE); 562 563 return (B_FALSE); 564 } 565 566 void 567 bscv_idi_new_instance(dev_info_t *dip) 568 { 569 ASSERT(bscv_idi_mgr.magic == BSCV_IDI_CALLOUT_MAGIC); 570 571 /* 572 * We don't care how many instances we have, or their value, so long 573 * as we have at least one valid value. This is so service routines 574 * can get any required locks via a soft state pointer. 575 */ 576 if (bscv_idi_mgr.valid_inst == (uint32_t)~0) { 577 bscv_idi_mgr.valid_inst = ddi_get_instance(dip); 578 } 579 } 580 581 void 582 bscv_idi_fini() 583 { 584 bscv_idi_mgr.valid_inst = (uint32_t)~0; /* No valid instances */ 585 bscv_idi_mgr.tbl = NULL; 586 } 587 #endif /* __sparc */ 588 589 /* 590 * function - bscv_attach 591 * description - this routine is responsible for setting aside memory for the 592 * driver data structures, initialising the mutexes and creating 593 * the device minor nodes. Additionally, this routine calls the 594 * the callback routine. 595 * inputs - device information structure, DDI_ATTACH command 596 * outputs - DDI_SUCCESS or DDI_FAILURE 597 */ 598 599 int 600 bscv_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 601 { 602 bscv_soft_state_t *ssp; 603 int instance; 604 605 switch (cmd) { 606 case DDI_ATTACH: 607 608 instance = ddi_get_instance(dip); 609 610 if (ddi_soft_state_zalloc(bscv_statep, instance) != 611 DDI_SUCCESS) { 612 return (DDI_FAILURE); 613 } 614 615 616 ssp = ddi_get_soft_state(bscv_statep, instance); 617 618 ssp->progress = 0; 619 620 ssp->dip = dip; 621 ssp->instance = instance; 622 ssp->event_waiting = B_FALSE; 623 ssp->status_change = B_FALSE; 624 ssp->nodename_change = B_FALSE; 625 ssp->cap0 = 0; 626 ssp->cap1 = 0; 627 ssp->cap2 = 0; 628 ssp->prog_mode_only = B_FALSE; 629 ssp->programming = B_FALSE; 630 ssp->cssp_prog = B_FALSE; 631 ssp->task_flags = 0; 632 ssp->debug = ddi_prop_get_int(DDI_DEV_T_ANY, dip, 633 DDI_PROP_DONTPASS, "debug", 0); 634 ssp->majornum = ddi_driver_major(dip); 635 ssp->minornum = BSCV_INST_TO_MINOR(instance); 636 #if defined(__i386) || defined(__amd64) 637 ssp->last_nodename[0] = '\0'; 638 #endif /* __i386 || __amd64 */ 639 640 /* 641 * initialise the mutexes 642 */ 643 644 mutex_init(&ssp->cmd_mutex, NULL, MUTEX_DRIVER, NULL); 645 646 mutex_init(&ssp->task_mu, NULL, MUTEX_DRIVER, NULL); 647 cv_init(&ssp->task_cv, NULL, CV_DRIVER, NULL); 648 cv_init(&ssp->task_evnt_cv, NULL, CV_DRIVER, NULL); 649 mutex_init(&ssp->prog_mu, NULL, MUTEX_DRIVER, NULL); 650 ssp->progress |= BSCV_LOCKS; 651 652 BSCV_TRACE(ssp, 'A', "bscv_attach", 653 "bscv_attach: mutexes and condition vars initialised"); 654 655 /* Map in physical communication channels */ 656 657 if (bscv_map_regs(ssp) != DDI_SUCCESS) { 658 (void) bscv_cleanup(ssp); 659 return (DDI_FAILURE); 660 } 661 ssp->progress |= BSCV_MAPPED_REGS; 662 663 /* Associate logical channels to physical channels */ 664 665 bscv_map_chan_logical_physical(ssp); 666 667 bscv_enter(ssp); 668 669 bscv_leave_programming_mode(ssp, B_FALSE); 670 671 if (bscv_attach_common(ssp) == DDI_FAILURE) { 672 bscv_exit(ssp); 673 (void) bscv_cleanup(ssp); 674 return (DDI_FAILURE); 675 } 676 677 #ifdef __sparc 678 /* 679 * At this point the inter-driver-interface is made available. 680 * The IDI uses the event thread service which 681 * bscv_attach_common() sets up. 682 */ 683 bscv_idi_new_instance(dip); 684 #endif /* __sparc */ 685 686 bscv_exit(ssp); 687 688 /* 689 * now create the minor nodes 690 */ 691 if (ddi_create_minor_node(ssp->dip, "lom", S_IFCHR, 692 BSCV_INST_TO_MINOR(instance), 693 DDI_PSEUDO, 0) != DDI_SUCCESS) { 694 (void) bscv_cleanup(ssp); 695 return (DDI_FAILURE); 696 } 697 BSCV_TRACE(ssp, 'A', "bscv_attach", 698 "bscv_attach: device minor nodes created"); 699 ssp->progress |= BSCV_NODES; 700 701 if (!ssp->prog_mode_only) 702 bscv_start_event_daemon(ssp); 703 704 #if defined(__i386) || defined(__amd64) 705 bscv_watchdog_enable = 1; 706 bscv_watchdog_available = 1; 707 watchdog_activated = 0; 708 bscv_watchdog_timeout_seconds = CLK_WATCHDOG_DEFAULT; 709 710 if (bscv_watchdog_enable && (boothowto & RB_DEBUG)) { 711 bscv_watchdog_available = 0; 712 cmn_err(CE_WARN, "bscv: kernel debugger " 713 "detected: hardware watchdog disabled"); 714 } 715 716 /* 717 * Before we enable the watchdog - register the panic 718 * callback so that we get called to stop the watchdog 719 * in the case of a panic. 720 */ 721 ssp->callb_id = callb_add(bscv_panic_callback, 722 (void *)ssp, CB_CL_PANIC, ""); 723 724 if (bscv_watchdog_available) { 725 (void) bscv_set_watchdog_timer(ssp, 726 CLK_WATCHDOG_DEFAULT); 727 bscv_enter(ssp); 728 bscv_setup_watchdog(ssp); /* starts cyclic callback */ 729 bscv_exit(ssp); 730 } 731 #endif /* __i386 || __amd64 */ 732 ddi_report_dev(dip); 733 return (DDI_SUCCESS); 734 default: 735 return (DDI_FAILURE); 736 } 737 } 738 739 /* 740 * function - bscv_detach 741 * description - routine that prepares a module to be unloaded. It undoes all 742 * the work done by the bscv_attach)() routine. This is 743 * facilitated by the use of the progress indicator 744 * inputs - device information structure, DDI_DETACH command 745 * outputs - DDI_SUCCESS or DDI_FAILURE 746 */ 747 748 /*ARGSUSED*/ 749 static int 750 bscv_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 751 { 752 return (DDI_FAILURE); 753 } 754 755 /* 756 * quiesce(9E) entry point. 757 * 758 * This function is called when the system is single-threaded at high 759 * PIL with preemption disabled. Therefore, this function must not be 760 * blocked. 761 * 762 * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure. 763 * DDI_FAILURE indicates an error condition and should almost never happen. 764 */ 765 static int 766 bscv_quiesce(dev_info_t *dip) 767 { 768 bscv_soft_state_t *ssp; 769 int instance; 770 771 772 instance = ddi_get_instance(dip); 773 ssp = ddi_get_soft_state(bscv_statep, instance); 774 if (ssp == NULL) { 775 return (DDI_FAILURE); 776 } 777 #ifdef DEBUG 778 /* Disable tracing, as we are executing at High-Interrupt level */ 779 bscv_trace_flag = 0; 780 #endif 781 /* quiesce the device */ 782 bscv_full_stop(ssp); 783 784 return (DDI_SUCCESS); 785 } 786 787 /* 788 * cb_ops routines 789 */ 790 791 /* 792 * function - bscv_open 793 * description - routine to provide association between user fd and device 794 * minor number. This routine is necessarily simple since a 795 * read/write interface is not provided. Additionally, the 796 * driver does not enforce exclusive access (FEXCL) or 797 * non-blocking during an open (FNDELAY). Deferred attach is 798 * supported. 799 * inputs - device number, flag specifying open type, device type, 800 * permissions 801 * outputs - success or failure of operation 802 */ 803 804 /*ARGSUSED*/ 805 static int 806 bscv_open(dev_t *devp, int flag, int otype, cred_t *cred) 807 { 808 bscv_soft_state_t *ssp; 809 int instance; 810 811 instance = DEVICETOINSTANCE(*devp); 812 ssp = ddi_get_soft_state(bscv_statep, instance); 813 if (ssp == NULL) { 814 return (ENXIO); /* not attached yet */ 815 } 816 BSCV_TRACE(ssp, 'O', "bscv_open", "instance 0x%x", instance); 817 818 if (otype != OTYP_CHR) { 819 return (EINVAL); 820 } 821 822 return (0); 823 } 824 825 /* 826 * function - bscv_close 827 * description - routine to perform the final close on the device. As per the 828 * open routine, neither FEXCL or FNDELAY accesses are enforced 829 * by the driver. 830 * inputs - device number,flag specifying open type, device type, 831 * permissions 832 * outputs - success or failure of operation 833 */ 834 835 /*ARGSUSED1*/ 836 static int 837 bscv_close(dev_t dev, int flag, int otype, cred_t *cred) 838 { 839 bscv_soft_state_t *ssp; 840 int instance; 841 842 instance = DEVICETOINSTANCE(dev); 843 ssp = ddi_get_soft_state(bscv_statep, instance); 844 if (ssp == NULL) { 845 return (ENXIO); 846 } 847 BSCV_TRACE(ssp, 'O', "bscv_close", "instance 0x%x", instance); 848 849 return (0); 850 } 851 852 static int 853 bscv_map_regs(bscv_soft_state_t *ssp) 854 { 855 int i; 856 int retval; 857 int *props; 858 unsigned int nelements; 859 860 ASSERT(ssp); 861 862 ssp->nchannels = 0; 863 864 /* 865 * Work out how many channels are available by looking at the number 866 * of elements of the regs property array. 867 */ 868 retval = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, ssp->dip, 869 DDI_PROP_DONTPASS, "reg", &props, &nelements); 870 871 /* We don't need props anymore. Free memory if it was allocated */ 872 if (retval == DDI_PROP_SUCCESS) 873 ddi_prop_free(props); 874 875 /* Check for sanity of nelements */ 876 if (retval != DDI_PROP_SUCCESS) { 877 BSCV_TRACE(ssp, 'A', "bscv_map_regs", "lookup reg returned" 878 " 0x%x", retval); 879 goto cleanup_exit; 880 } else if (nelements % LOMBUS_REGSPEC_SIZE != 0) { 881 BSCV_TRACE(ssp, 'A', "bscv_map_regs", "nelements %d not" 882 " a multiple of %d", nelements, LOMBUS_REGSPEC_SIZE); 883 goto cleanup_exit; 884 } else if (nelements > BSCV_MAXCHANNELS * LOMBUS_REGSPEC_SIZE) { 885 BSCV_TRACE(ssp, 'A', "bscv_map_regs", "nelements %d too large" 886 ", probably a misconfiguration", nelements); 887 goto cleanup_exit; 888 } else if (nelements < BSCV_MINCHANNELS * LOMBUS_REGSPEC_SIZE) { 889 BSCV_TRACE(ssp, 'A', "bscv_map_regs", "nelements %d too small" 890 ", need to have at least a general and a wdog channel", 891 nelements); 892 goto cleanup_exit; 893 } 894 895 ssp->nchannels = nelements / LOMBUS_REGSPEC_SIZE; 896 897 ssp->attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 898 ssp->attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; 899 ssp->attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 900 901 for (i = 0; i < ssp->nchannels; i++) { 902 retval = ddi_regs_map_setup(ssp->dip, i, 903 (caddr_t *)&ssp->channel[i].regs, 904 0, 0, &ssp->attr, &ssp->channel[i].handle); 905 if (retval != DDI_SUCCESS) { 906 BSCV_TRACE(ssp, 'A', "bscv_map_regs", "map failure" 907 " 0x%x on space %d", retval, i); 908 909 /* Rewind all current mappings - avoiding failed one */ 910 i--; 911 for (; i >= 0; i--) { 912 ddi_regs_map_free(&ssp->channel[i].handle); 913 } 914 915 goto cleanup_exit; 916 } 917 } 918 919 return (DDI_SUCCESS); 920 921 cleanup_exit: 922 /* 923 * It is important to set nchannels to 0 even if, say, only one of 924 * the two required handles was mapped. If we cannot achieve our 925 * minimum config its not safe to do any IO; this keeps our failure 926 * mode handling simpler. 927 */ 928 ssp->nchannels = 0; 929 return (DDI_FAILURE); 930 } 931 932 static void 933 bscv_unmap_regs(bscv_soft_state_t *ssp) 934 { 935 int i; 936 937 ASSERT(ssp); 938 939 for (i = 0; i < ssp->nchannels; i++) { 940 ddi_regs_map_free(&ssp->channel[i].handle); 941 } 942 } 943 944 /* 945 * Map logical services onto physical XBus channels. 946 */ 947 static void 948 bscv_map_chan_logical_physical(bscv_soft_state_t *ssp) 949 { 950 ASSERT(ssp); 951 952 /* 953 * We can assert that there will always be at least two channels, 954 * to allow watchdog pats to be segregated from all other traffic. 955 */ 956 chan_general = 0; 957 chan_wdogpat = 1; 958 959 /* 960 * By default move all other services onto the generic channel unless 961 * the hardware supports additional channels. 962 */ 963 964 chan_cpusig = chan_eeprom = chan_prog = chan_general; 965 966 if (ssp->nchannels > 2) 967 chan_cpusig = 2; 968 if (ssp->nchannels > 3) 969 chan_eeprom = 3; 970 if (ssp->nchannels > 4) 971 chan_prog = 4; 972 } 973 974 975 /* 976 * function - bscv_full_stop 977 * description - gracefully shut the lom down during panic or reboot. 978 * Disables the watchdog and sets up serial event reporting. 979 * inputs - soft state pointer 980 * outputs - none 981 */ 982 void 983 bscv_full_stop(bscv_soft_state_t *ssp) 984 { 985 uint8_t bits2set = 0; 986 uint8_t bits2clear = 0; 987 int obtained_lock; 988 989 BSCV_TRACE(ssp, 'W', "bscv_full_stop", 990 "turning off watchdog"); 991 992 /* 993 * Obtain the softstate lock only if it is not already owned, 994 * as this function can be called from a High-level interrupt 995 * context. As a result, our thread cannot sleep. 996 * At end of function, our thread releases the lock only if 997 * it acquired the lock. 998 */ 999 obtained_lock = (bscv_tryenter(ssp) != 0); 1000 1001 #if defined(__i386) || defined(__amd64) 1002 if (ddi_in_panic()) { 1003 bscv_inform_bsc(ssp, BSC_INFORM_PANIC); 1004 } else { 1005 bscv_inform_bsc(ssp, BSC_INFORM_OFFLINE); 1006 } 1007 #endif /* __i386 || __amd64 */ 1008 1009 /* set serial event reporting */ 1010 switch (ssp->serial_reporting) { 1011 case LOM_SER_EVENTS_ON: 1012 case LOM_SER_EVENTS_DEF: 1013 /* Make sure serial event reporting is on */ 1014 bits2clear = EBUS_ALARM_NOEVENTS; 1015 break; 1016 case LOM_SER_EVENTS_OFF: 1017 /* Make sure serial event reporting is on */ 1018 bits2set = EBUS_ALARM_NOEVENTS; 1019 break; 1020 default: 1021 break; 1022 } 1023 bscv_setclear8_volatile(ssp, chan_general, 1024 EBUS_IDX_ALARM, bits2set, bits2clear); 1025 1026 /* Do not free the lock if our thread did not obtain it. */ 1027 if (obtained_lock != 0) { 1028 bscv_exit(ssp); 1029 } 1030 } 1031 1032 /* 1033 * LOM I/O routines. 1034 * 1035 * locking 1036 * 1037 * Two sets of routines are provided: 1038 * normal - must be called after acquiring an appropriate lock. 1039 * locked - perform all the locking required and return any error 1040 * code in the supplied 'res' argument. If there is no 1041 * error 'res' is not changed. 1042 * The locked routines are designed for use in ioctl commands where 1043 * only a single operation needs to be performed and the overhead of 1044 * locking and result checking adds significantly to code complexity. 1045 * 1046 * locking primitives 1047 * 1048 * bscv_enter() - acquires an I/O lock for the calling thread. 1049 * bscv_tryenter() - conditionally acquires an I/O lock for calling thread. 1050 * bscv_exit() - releases an I/O lock acquired by bscv_enter(). 1051 * bscv_held() - used to assert ownership of an I/O lock. 1052 * 1053 * normal I/O routines 1054 * 1055 * Note bscv_{put|get}{16|32} routines are big-endian. This assumes that 1056 * the firmware works that way too. 1057 * 1058 * bscv_put8(), bscv_put16, bscv_put32 - write values to the LOM 1059 * and handle any retries if necessary. 1060 * 16 and 32 bit values are big-endian. 1061 * bscv_get8(), bscv_get16, bscv_get32 - read values from the LOM 1062 * and handle any retries if necessary. 1063 * 16 and 32 bit values are big-endian. 1064 * bscv_setclear8() - set or clear the specified bits in the register 1065 * at the supplied address. 1066 * bscv_setclear8_volatile() - set or clear the specified bits in the 1067 * register at the supplied address. If the lom reports 1068 * that the registers has changed since the last read 1069 * re-read and apply the set or clear to the new bits. 1070 * bscv_get8_cached() - Return a cached register value (addr < 0x80). 1071 * Does not access the hardware. A read of the hardware 1072 * automatically updates this cache. 1073 * 1074 * locked I/O routines 1075 * 1076 * bscv_get8_locked(), bscv_rep_get8_locked(). 1077 * 1078 * Call the indicated function from above, but wrapping it with 1079 * bscv_enter()/bscv_exit(). 1080 * 1081 * 1082 * Fault management 1083 * 1084 * LOM communications fault are grouped into three categories: 1085 * 1) Faulty - the LOM is not responding and no attempt to communicate 1086 * with it should be made. 1087 * 2) Transient fault - something which might recover after a retry 1088 * but which doesn't affect our ability to perform other 1089 * commands. 1090 * 3) Command error - an inappropriate command was executed. A retry 1091 * will not fix it but the command failed. 1092 * 1093 * The current implementation of the bscv driver is not very good at 1094 * noticing command errors due to the structure of the original code 1095 * that it is based on. It is possible to extend the driver to do this 1096 * and would probably involve having a concept of a "session error" 1097 * which is less severe than a fault but means that a sequence of 1098 * commands had some fault which cannot be recovered. 1099 * 1100 * 1101 * faults 1102 * 1103 * bscv_faulty() - returns B_TRUE if the LOM (communications) have been 1104 * declared faulty. 1105 * bscv_clear_fault() - marks the LOM as not faulty. 1106 * bscv_set_fault() - marks the LOM as being faulty. 1107 * 1108 * bscv_clear_fault and bscv_set_fault should generally not be called 1109 * directly. 1110 * 1111 * command errors/transient faults 1112 * 1113 * bscv_retcode() - returns the actual error code of the last operation. 1114 * bscv_should_retry() - determines if last operation may suceed if 1115 * retried. 1116 * bscv_locked_result() - Set the result of a locked register access. 1117 * 1118 * low level I/O primitives 1119 * 1120 * These are generally not called directly. These perform a single 1121 * access to the LOM device. They do not handle retries. 1122 * 1123 * bscv_put8_once() 1124 * bscv_get8_once() 1125 * bscv_probe() - perform a probe (NOP) operation to check out lom comms. 1126 * bscv_resync_comms() - resynchronise communications after a transient fault. 1127 */ 1128 1129 static void 1130 bscv_enter(bscv_soft_state_t *ssp) 1131 { 1132 BSCV_TRACE(ssp, '@', "bscv_enter", ""); 1133 mutex_enter(&ssp->cmd_mutex); 1134 ssp->had_session_error = B_FALSE; 1135 } 1136 1137 static int 1138 bscv_tryenter(bscv_soft_state_t *ssp) 1139 { 1140 int rv; 1141 1142 BSCV_TRACE(ssp, '@', "bscv_tryenter", ""); 1143 if ((rv = mutex_tryenter(&ssp->cmd_mutex)) != 0) { 1144 ssp->had_session_error = B_FALSE; 1145 } 1146 return (rv); 1147 } 1148 1149 static void 1150 bscv_exit(bscv_soft_state_t *ssp) 1151 { 1152 mutex_exit(&ssp->cmd_mutex); 1153 BSCV_TRACE(ssp, '@', "bscv_exit", ""); 1154 } 1155 1156 #ifdef DEBUG 1157 static int 1158 bscv_held(bscv_soft_state_t *ssp) 1159 { 1160 return (mutex_owned(&ssp->cmd_mutex)); 1161 } 1162 #endif /* DEBUG */ 1163 1164 static void 1165 bscv_put8(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr, uint8_t val) 1166 { 1167 boolean_t needretry; 1168 int num_failures; 1169 1170 ASSERT(bscv_held(ssp)); 1171 1172 if (bscv_faulty(ssp)) { 1173 return; 1174 } 1175 1176 BSCV_TRACE(ssp, '@', "bscv_put8", 1177 "addr 0x%x.%02x <= 0x%02x", addr >> 8, addr & 0xff, val); 1178 1179 for (num_failures = 0; 1180 num_failures < BSC_FAILURE_RETRY_LIMIT; 1181 num_failures++) { 1182 bscv_put8_once(ssp, chan, addr, val); 1183 needretry = bscv_should_retry(ssp); 1184 if (!needretry) { 1185 break; 1186 } 1187 } 1188 if (ssp->command_error != 0) { 1189 ssp->had_session_error = B_TRUE; 1190 } 1191 1192 if (needretry) { 1193 /* Failure - we ran out of retries */ 1194 cmn_err(CE_WARN, "bscv_put8: addr 0x%x.%02x retried " 1195 "write %d times, giving up", 1196 addr >> 8, addr & 0xff, num_failures); 1197 bscv_set_fault(ssp); 1198 } else if (num_failures > 0) { 1199 BSCV_TRACE(ssp, 'R', "bscv_put8", 1200 "addr 0x%x.%02x retried write %d times, succeeded", 1201 addr >> 8, addr & 0xff, num_failures); 1202 } 1203 } 1204 1205 static void 1206 bscv_put16(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr, uint16_t val) 1207 { 1208 ASSERT(bscv_held(ssp)); 1209 BSCV_TRACE(ssp, '@', "bscv_put16", 1210 "addr 0x%x.%02x <= %04x", addr >> 8, addr & 0xff, val); 1211 bscv_put8(ssp, chan, addr, val >> 8); 1212 bscv_put8(ssp, chan, addr + 1, val & 0xff); 1213 } 1214 1215 static void 1216 bscv_put32(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr, uint32_t val) 1217 { 1218 ASSERT(bscv_held(ssp)); 1219 BSCV_TRACE(ssp, '@', "bscv_put32", 1220 "addr 0x%x.%02x <= %08x", addr >> 8, addr & 0xff, val); 1221 bscv_put8(ssp, chan, addr, (val >> 24) & 0xff); 1222 bscv_put8(ssp, chan, addr + 1, (val >> 16) & 0xff); 1223 bscv_put8(ssp, chan, addr + 2, (val >> 8) & 0xff); 1224 bscv_put8(ssp, chan, addr + 3, val & 0xff); 1225 } 1226 1227 static uint8_t 1228 bscv_get8(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr) 1229 { 1230 uint8_t retval; 1231 boolean_t needretry; 1232 int num_failures; 1233 1234 ASSERT(bscv_held(ssp)); 1235 1236 if (bscv_faulty(ssp)) { 1237 return (0); 1238 } 1239 1240 for (num_failures = 0; 1241 num_failures < BSC_FAILURE_RETRY_LIMIT; 1242 num_failures++) { 1243 retval = bscv_get8_once(ssp, chan, addr); 1244 needretry = bscv_should_retry(ssp); 1245 if (!needretry) { 1246 break; 1247 } 1248 } 1249 if (ssp->command_error != 0) { 1250 ssp->had_session_error = B_TRUE; 1251 } 1252 1253 if (needretry) { 1254 /* Failure */ 1255 cmn_err(CE_WARN, "bscv_get8: addr 0x%x.%02x retried " 1256 "read %d times, giving up", 1257 addr >> 8, addr & 0xff, num_failures); 1258 bscv_set_fault(ssp); 1259 } else if (num_failures > 0) { 1260 BSCV_TRACE(ssp, 'R', "bscv_get8", 1261 "addr 0x%x.%02x retried read %d times, succeeded", 1262 addr >> 8, addr & 0xff, num_failures); 1263 } 1264 1265 BSCV_TRACE(ssp, '@', "bscv_get8", 1266 "addr 0x%x.%02x => %02x", addr >> 8, addr & 0xff, retval); 1267 return (retval); 1268 } 1269 1270 static uint16_t 1271 bscv_get16(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr) 1272 { 1273 uint16_t retval; 1274 1275 ASSERT(bscv_held(ssp)); 1276 1277 retval = bscv_get8(ssp, chan, addr) << 8; 1278 retval |= bscv_get8(ssp, chan, addr + 1); 1279 1280 BSCV_TRACE(ssp, '@', "bscv_get16", 1281 "addr 0x%x.%02x => %04x", addr >> 8, addr & 0xff, retval); 1282 return (retval); 1283 } 1284 1285 static uint32_t 1286 bscv_get32(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr) 1287 { 1288 uint32_t retval; 1289 1290 ASSERT(bscv_held(ssp)); 1291 1292 retval = bscv_get8(ssp, chan, addr) << 24; 1293 retval |= bscv_get8(ssp, chan, addr + 1) << 16; 1294 retval |= bscv_get8(ssp, chan, addr + 2) << 8; 1295 retval |= bscv_get8(ssp, chan, addr + 3); 1296 1297 BSCV_TRACE(ssp, '@', "bscv_get32", 1298 "addr 0x%x.%02x => %08x", addr >> 8, addr & 0xff, retval); 1299 return (retval); 1300 } 1301 1302 static void 1303 bscv_setclear8(bscv_soft_state_t *ssp, int chan, 1304 bscv_addr_t addr, uint8_t set, uint8_t clear) 1305 { 1306 uint8_t val; 1307 1308 ASSERT(bscv_held(ssp)); 1309 ASSERT(addr < BSC_ADDR_CACHE_LIMIT); 1310 1311 val = ssp->lom_regs[addr] | set; 1312 val &= ~clear; 1313 1314 BSCV_TRACE(ssp, '@', "bscv_setclear8", 1315 "addr 0x%x.%02x, set %02x, clear %02x => %02x", 1316 addr >> 8, addr & 0xff, 1317 set, clear, val); 1318 1319 bscv_put8(ssp, chan, addr, val); 1320 } 1321 1322 static void 1323 bscv_setclear8_volatile(bscv_soft_state_t *ssp, int chan, 1324 bscv_addr_t addr, uint8_t set, uint8_t clear) 1325 { 1326 uint8_t val; 1327 boolean_t needretry; 1328 int num_failures; 1329 1330 ASSERT(bscv_held(ssp)); 1331 ASSERT(addr < BSC_ADDR_CACHE_LIMIT); 1332 1333 if (bscv_faulty(ssp)) { 1334 return; 1335 } 1336 1337 BSCV_TRACE(ssp, '@', "bscv_setclear8_volatile", 1338 "addr 0x%x.%02x => set %02x clear %02x", 1339 addr >> 8, addr & 0xff, set, clear); 1340 1341 val = bscv_get8_cached(ssp, addr); 1342 for (num_failures = 0; 1343 num_failures < BSC_FAILURE_RETRY_LIMIT; 1344 num_failures++) { 1345 val |= set; 1346 val &= ~clear; 1347 bscv_put8_once(ssp, chan, addr, val); 1348 if (ssp->command_error == EBUS_ERROR_STALEDATA) { 1349 /* Re-read the stale register from the lom */ 1350 val = bscv_get8_once(ssp, chan, addr); 1351 needretry = 1; 1352 } else { 1353 needretry = bscv_should_retry(ssp); 1354 if (!needretry) { 1355 break; 1356 } 1357 } 1358 } 1359 if (ssp->command_error != 0) { 1360 ssp->had_session_error = B_TRUE; 1361 } 1362 1363 if (needretry) { 1364 /* Failure */ 1365 cmn_err(CE_WARN, "bscv_setclear8_volatile: addr 0x%x.%02x " 1366 "retried write %d times, giving up", 1367 addr >> 8, addr & 0xff, num_failures); 1368 if (ssp->command_error != EBUS_ERROR_STALEDATA) { 1369 bscv_set_fault(ssp); 1370 } 1371 } else if (num_failures > 0) { 1372 BSCV_TRACE(ssp, 'R', "bscv_setclear8_volatile", 1373 "addr 0x%x.%02x retried write %d times, succeeded", 1374 addr >> 8, addr & 0xff, num_failures); 1375 } 1376 } 1377 1378 static void 1379 bscv_rep_rw8(bscv_soft_state_t *ssp, int chan, uint8_t *host_addr, 1380 bscv_addr_t dev_addr, size_t repcount, uint_t flags, 1381 boolean_t is_write) 1382 { 1383 size_t inc; 1384 1385 ASSERT(bscv_held(ssp)); 1386 1387 inc = (flags & DDI_DEV_AUTOINCR) ? 1 : 0; 1388 for (; repcount--; dev_addr += inc) { 1389 if (flags & DDI_DEV_AUTOINCR) { 1390 if (is_write) { 1391 bscv_put8(ssp, chan, dev_addr, *host_addr++); 1392 } else { 1393 *host_addr++ = bscv_get8(ssp, chan, dev_addr); 1394 } 1395 } else { 1396 if (is_write) { 1397 bscv_put8_once(ssp, chan, 1398 dev_addr, *host_addr++); 1399 } else { 1400 *host_addr++ = bscv_get8_once(ssp, chan, 1401 dev_addr); 1402 } 1403 /* We need this because _once routines don't do it */ 1404 if (ssp->command_error != 0) { 1405 ssp->had_session_error = B_TRUE; 1406 } 1407 } 1408 if (bscv_faulty(ssp) || bscv_session_error(ssp)) { 1409 /* 1410 * No retry here. If we were AUTOINCR then get/put 1411 * will have retried. For NO_AUTOINCR we cannot retry 1412 * because the data would be corrupted. 1413 */ 1414 break; 1415 } 1416 } 1417 } 1418 1419 static uint8_t 1420 bscv_get8_cached(bscv_soft_state_t *ssp, bscv_addr_t addr) 1421 { 1422 ASSERT(addr < BSC_ADDR_CACHE_LIMIT); 1423 /* Can be called with or without the lock held */ 1424 1425 return (ssp->lom_regs[addr]); 1426 } 1427 1428 static uint8_t 1429 bscv_get8_locked(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr, int *res) 1430 { 1431 uint8_t retval; 1432 1433 ASSERT(addr < BSC_ADDR_CACHE_LIMIT); 1434 bscv_enter(ssp); 1435 retval = bscv_get8(ssp, chan, addr); 1436 bscv_locked_result(ssp, res); 1437 bscv_exit(ssp); 1438 BSCV_TRACE(ssp, '@', "bscv_get8_locked", 1439 "addr 0x%x.%02x => %02x", addr >> 8, addr & 0xff, retval); 1440 return (retval); 1441 } 1442 1443 static void 1444 bscv_rep_get8_locked(bscv_soft_state_t *ssp, int chan, uint8_t *host_addr, 1445 bscv_addr_t dev_addr, size_t repcount, uint_t flags, int *res) 1446 { 1447 bscv_enter(ssp); 1448 bscv_rep_rw8(ssp, chan, host_addr, dev_addr, repcount, 1449 flags, B_FALSE /* read */); 1450 bscv_locked_result(ssp, res); 1451 bscv_exit(ssp); 1452 } 1453 1454 static boolean_t 1455 bscv_faulty(bscv_soft_state_t *ssp) 1456 { 1457 ASSERT(bscv_held(ssp)); 1458 return (ssp->had_fault); 1459 } 1460 1461 static void 1462 bscv_clear_fault(bscv_soft_state_t *ssp) 1463 { 1464 ASSERT(bscv_held(ssp)); 1465 BSCV_TRACE(ssp, 'J', "bscv_clear_fault", "clearing fault flag"); 1466 ssp->had_fault = B_FALSE; 1467 ssp->had_session_error = B_FALSE; 1468 } 1469 1470 static void 1471 bscv_set_fault(bscv_soft_state_t *ssp) 1472 { 1473 ASSERT(bscv_held(ssp)); 1474 BSCV_TRACE(ssp, 'J', "bscv_set_fault", "setting fault flag"); 1475 ssp->had_fault = B_TRUE; 1476 } 1477 1478 static boolean_t 1479 bscv_session_error(bscv_soft_state_t *ssp) 1480 { 1481 ASSERT(bscv_held(ssp)); 1482 return (ssp->had_session_error); 1483 } 1484 1485 static int 1486 bscv_retcode(bscv_soft_state_t *ssp) 1487 { 1488 BSCV_TRACE(ssp, '@', "bscv_retcode", 1489 "code 0x%x", ssp->command_error); 1490 return (ssp->command_error); 1491 } 1492 1493 static int 1494 bscv_should_retry(bscv_soft_state_t *ssp) 1495 { 1496 if ((ssp->command_error == EBUS_ERROR_DEVICEFAIL) || 1497 (ssp->command_error >= LOMBUS_ERR_BASE)) { 1498 /* This command is due to an I/O fault - retry might fix */ 1499 return (1); 1500 } else { 1501 /* 1502 * The command itself was bad - there is no point in fixing 1503 * Note. Whatever happens we should know that if we were 1504 * doing EBUS_IDX_SELFTEST0..EBUS_IDX_SELFTEST7 and we 1505 * had 0x80 set then this is a test error not a retry 1506 * error. 1507 */ 1508 return (0); 1509 } 1510 } 1511 1512 static void 1513 bscv_locked_result(bscv_soft_state_t *ssp, int *res) 1514 { 1515 if (bscv_faulty(ssp) || (bscv_retcode(ssp) != 0)) { 1516 *res = EIO; 1517 } 1518 } 1519 1520 static void 1521 bscv_put8_once(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr, uint8_t val) 1522 { 1523 uint32_t fault; 1524 1525 ASSERT(bscv_held(ssp)); 1526 1527 ssp->command_error = 0; 1528 1529 if (bscv_faulty(ssp)) { 1530 /* Bail out things are not working */ 1531 return; 1532 } else if (ssp->nchannels == 0) { 1533 /* Didn't manage to map handles so ddi_{get,put}* broken */ 1534 BSCV_TRACE(ssp, '@', "bscv_put8_once", 1535 "nchannels is 0x0 so cannot do IO"); 1536 return; 1537 } 1538 1539 /* Clear any pending fault */ 1540 ddi_put32(ssp->channel[chan].handle, 1541 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_FAULT_REG), 0); 1542 1543 /* Do the access and get fault code - may take a long time */ 1544 ddi_put8(ssp->channel[chan].handle, 1545 &ssp->channel[chan].regs[addr], val); 1546 fault = ddi_get32(ssp->channel[chan].handle, 1547 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_FAULT_REG)); 1548 1549 ssp->command_error = fault; 1550 1551 if (fault == 0) { 1552 /* Things were ok - update cache entry */ 1553 if (addr < BSC_ADDR_CACHE_LIMIT) { 1554 /* Store cacheable entries */ 1555 ssp->lom_regs[addr] = val; 1556 } 1557 } else if (fault >= LOMBUS_ERR_BASE) { 1558 /* lombus problem - do a resync session */ 1559 cmn_err(CE_WARN, "!bscv_put8_once: Had comms fault " 1560 "for address 0x%x.%02x - data 0x%x, fault 0x%x", 1561 addr >> 8, addr & 0xff, val, fault); 1562 /* Attempt to resync with the lom */ 1563 bscv_resync_comms(ssp, chan); 1564 /* 1565 * Note: we do not set fault status here. That 1566 * is done if our caller decides to give up talking to 1567 * the lom. The observant might notice that this means 1568 * that if we mend things on the last attempt we still 1569 * get the fault set - we just live with that! 1570 */ 1571 } 1572 1573 BSCV_TRACE(ssp, '@', "bscv_put8_once", 1574 "addr 0x%x.%02x <= 0x%02x", addr >> 8, addr & 0xff, val); 1575 } 1576 1577 static uint8_t 1578 bscv_get8_once(bscv_soft_state_t *ssp, int chan, bscv_addr_t addr) 1579 { 1580 uint8_t val; 1581 uint32_t fault; 1582 1583 ASSERT(bscv_held(ssp)); 1584 1585 ssp->command_error = 0; 1586 1587 if (bscv_faulty(ssp)) { 1588 /* Bail out things are not working */ 1589 return (0xff); 1590 } else if (ssp->nchannels == 0) { 1591 /* Didn't manage to map handles so ddi_{get,put}* broken */ 1592 BSCV_TRACE(ssp, '@', "bscv_get8_once", 1593 "nchannels is 0x0 so cannot do IO"); 1594 return (0xff); 1595 } 1596 1597 /* Clear any pending fault */ 1598 ddi_put32(ssp->channel[chan].handle, 1599 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_FAULT_REG), 0); 1600 1601 /* Do the access and get fault code - may take a long time */ 1602 val = ddi_get8(ssp->channel[chan].handle, 1603 &ssp->channel[chan].regs[addr]); 1604 fault = ddi_get32(ssp->channel[chan].handle, 1605 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_FAULT_REG)); 1606 ssp->command_error = fault; 1607 1608 if (fault >= LOMBUS_ERR_BASE) { 1609 /* lombus problem - do a resync session */ 1610 cmn_err(CE_WARN, "!bscv_get8_once: Had comms fault " 1611 "for address 0x%x.%02x - data 0x%x, fault 0x%x", 1612 addr >> 8, addr & 0xff, val, fault); 1613 /* Attempt to resync with the lom */ 1614 bscv_resync_comms(ssp, chan); 1615 /* 1616 * Note: we do not set fault status here. That 1617 * is done if our caller decides to give up talking to 1618 * the lom. The observant might notice that this means 1619 * that if we mend things on the last attempt we still 1620 * get the fault set - we just live with that! 1621 */ 1622 } 1623 /* 1624 * FIXME - should report error if you get 1625 * EBUS_ERROR_DEVICEFAIL reported from the BSC. That gets 1626 * logged as a failure in bscv_should_retry and may contribute 1627 * to a permanent failure. Reference issues seen by Mitac. 1628 */ 1629 1630 if (!bscv_faulty(ssp)) { 1631 if (addr < BSC_ADDR_CACHE_LIMIT) { 1632 /* Store cacheable entries */ 1633 ssp->lom_regs[addr] = val; 1634 } 1635 } 1636 1637 BSCV_TRACE(ssp, '@', "bscv_get8_once", 1638 "addr 0x%x.%02x => 0x%02x", addr >> 8, addr & 0xff, val); 1639 return (val); 1640 } 1641 1642 static uint32_t 1643 bscv_probe(bscv_soft_state_t *ssp, int chan, uint32_t *fault) 1644 { 1645 uint32_t async_reg; 1646 1647 if (ssp->nchannels == 0) { 1648 /* 1649 * Failed to map handles, so cannot do any IO. Set the 1650 * fault indicator and return a dummy value. 1651 */ 1652 BSCV_TRACE(ssp, '@', "bscv_probe", 1653 "nchannels is 0x0 so cannot do any IO"); 1654 *fault = LOMBUS_ERR_REG_NUM; 1655 return ((~(int8_t)0)); 1656 } 1657 1658 /* Clear faults */ 1659 ddi_put32(ssp->channel[chan].handle, 1660 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_FAULT_REG), 0); 1661 /* Probe and Check faults */ 1662 *fault = ddi_get32(ssp->channel[chan].handle, 1663 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_PROBE_REG)); 1664 /* Read status */ 1665 async_reg = ddi_get32(ssp->channel[chan].handle, 1666 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, LOMBUS_ASYNC_REG)); 1667 1668 BSCV_TRACE(ssp, '@', "bscv_probe", 1669 "async status 0x%x, fault 0x%x", async_reg, *fault); 1670 return (async_reg); 1671 } 1672 1673 static void 1674 bscv_resync_comms(bscv_soft_state_t *ssp, int chan) 1675 { 1676 int try; 1677 uint32_t command_error = ssp->command_error; 1678 uint32_t fault = 0; 1679 1680 if (ssp->nchannels == 0) { 1681 /* 1682 * Didn't manage to map handles so ddi_{get,put}* broken. 1683 * Therefore, there is no way to resync comms. 1684 */ 1685 BSCV_TRACE(ssp, '@', "bscv_resync_comms", 1686 "nchannels is 0x0 so not possible to resync comms"); 1687 return; 1688 } 1689 if (command_error >= LOMBUS_ERR_BASE && 1690 command_error != LOMBUS_ERR_REG_NUM && 1691 command_error != LOMBUS_ERR_REG_SIZE && 1692 command_error != LOMBUS_ERR_TIMEOUT) { 1693 /* Resync here to make sure that the lom is talking */ 1694 cmn_err(CE_WARN, "!bscv_resync_comms: " 1695 "Attempting comms resync after comms fault 0x%x", 1696 command_error); 1697 for (try = 1; try <= 8; try++) { 1698 /* Probe */ 1699 fault = ddi_get32(ssp->channel[chan].handle, 1700 (uint32_t *)BSC_NEXUS_ADDR(ssp, chan, 0, 1701 LOMBUS_PROBE_REG)); 1702 1703 if (fault == 0) { 1704 break; 1705 } else { 1706 cmn_err(CE_WARN, "!bscv_resync_comms: " 1707 "comms resync (probing) - try 0x%x " 1708 "had fault 0x%x", try, fault); 1709 } 1710 } 1711 if (fault != 0) { 1712 cmn_err(CE_WARN, "!bscv_resync_comms: " 1713 "Failed to resync comms - giving up"); 1714 ssp->bad_resync++; 1715 } else { 1716 cmn_err(CE_WARN, "!bscv_resync_comms: " 1717 "resync comms after 0x%x tries", try); 1718 ssp->bad_resync = 0; 1719 } 1720 } 1721 1722 } 1723 1724 1725 /* 1726 * LOMLite configuration/event eeprom access routines 1727 * 1728 * bscv_window_setup() - Read/Sanity check the eeprom parameters. 1729 * This must be called prior to calling bscv_eerw(). 1730 * bscv_eerw() - Read/write data from/to the eeprom. 1731 */ 1732 1733 /* 1734 * function - bscv_window_setup 1735 * description - this routine reads the eeprom parameters and sanity 1736 * checks them to ensure that the lom is talking sense. 1737 * inputs - soft state ptr 1738 * outputs - B_TRUE if the eeprom is ok, B_FALSE if the eeprom is not OK. 1739 */ 1740 static boolean_t 1741 bscv_window_setup(bscv_soft_state_t *ssp) 1742 { 1743 ASSERT(bscv_held(ssp)); 1744 1745 if (ssp->eeinfo_valid) { 1746 /* Already have good cached values */ 1747 return (ssp->eeinfo_valid); 1748 } 1749 ssp->eeprom_size = 1750 bscv_get8(ssp, chan_general, EBUS_IDX_EEPROM_SIZE_KB) * 1024; 1751 ssp->eventlog_start = bscv_get16(ssp, chan_general, 1752 EBUS_IDX_LOG_START_HI); 1753 1754 /* 1755 * The log does not run to the end of the EEPROM because it is a 1756 * logical partition. The last 8K partition is reserved for FRUID 1757 * usage. 1758 */ 1759 ssp->eventlog_size = EBUS_LOG_END - ssp->eventlog_start; 1760 1761 BSCV_TRACE(ssp, 'I', "bscv_window_setup", "eeprom size 0x%x log_start" 1762 " 0x%x log_size 0x%x", ssp->eeprom_size, ssp->eventlog_start, 1763 ssp->eventlog_size); 1764 1765 if (bscv_faulty(ssp) || bscv_session_error(ssp)) { 1766 ssp->eeinfo_valid = B_FALSE; 1767 } else if ((ssp->eeprom_size == 0) || 1768 (ssp->eventlog_start >= ssp->eeprom_size)) { 1769 /* Sanity check values */ 1770 cmn_err(CE_WARN, 1771 "!bscv_window_setup: read invalid eeprom parameters"); 1772 ssp->eeinfo_valid = B_FALSE; 1773 } else { 1774 ssp->eeinfo_valid = B_TRUE; 1775 } 1776 1777 BSCV_TRACE(ssp, 'I', "bscv_window_setup", "returning eeinfo_valid %s", 1778 ssp->eeinfo_valid ? "true" : "false"); 1779 return (ssp->eeinfo_valid); 1780 } 1781 1782 /* 1783 * function - bscv_eerw 1784 * description - this routine reads/write data from/to the eeprom. 1785 * It takes care of setting the window on the eeprom correctly. 1786 * inputs - soft state ptr, eeprom offset, data buffer, size, read/write 1787 * outputs - B_TRUE if the eeprom is ok, B_FALSE if the eeprom is not OK. 1788 */ 1789 static int 1790 bscv_eerw(bscv_soft_state_t *ssp, uint32_t eeoffset, uint8_t *buf, 1791 unsigned size, boolean_t is_write) 1792 { 1793 uint32_t blk_addr = eeoffset; 1794 unsigned remaining = size; 1795 uint8_t page_idx; 1796 uint8_t this_page; 1797 uint8_t blk_size; 1798 int res = 0; 1799 1800 while (remaining > 0) { 1801 page_idx = blk_addr & 0xff; 1802 if ((page_idx + remaining) > 0x100) { 1803 blk_size = 0x100 - page_idx; 1804 } else { 1805 blk_size = remaining; 1806 } 1807 1808 /* Select correct eeprom page */ 1809 this_page = blk_addr >> 8; 1810 bscv_put8(ssp, chan_eeprom, EBUS_IDX_EEPROM_PAGESEL, this_page); 1811 1812 BSCV_TRACE(ssp, 'M', "lom_eerw", 1813 "%s data @0x%x.%02x, size 0x%x, 0x%x bytes remaining", 1814 is_write ? "writing" : "reading", 1815 this_page, page_idx, blk_size, remaining - blk_size); 1816 1817 bscv_rep_rw8(ssp, chan_eeprom, 1818 buf, BSCVA(EBUS_CMD_SPACE_EEPROM, page_idx), 1819 blk_size, DDI_DEV_AUTOINCR, is_write); 1820 1821 if (bscv_faulty(ssp) || bscv_session_error(ssp)) { 1822 res = EIO; 1823 break; 1824 } 1825 1826 remaining -= blk_size; 1827 blk_addr += blk_size; 1828 buf += blk_size; 1829 } 1830 1831 return (res); 1832 } 1833 1834 static boolean_t 1835 bscv_is_null_event(bscv_soft_state_t *ssp, lom_event_t *e) 1836 { 1837 ASSERT(e != NULL); 1838 1839 if (EVENT_DECODE_SUBSYS(e->ev_subsys) == EVENT_SUBSYS_NONE && 1840 e->ev_event == EVENT_NONE) { 1841 /* 1842 * This marks a NULL event. 1843 */ 1844 BSCV_TRACE(ssp, 'E', "bscv_is_null_event", 1845 "EVENT_SUBSYS_NONE/EVENT_NONE null event"); 1846 return (B_TRUE); 1847 } else if (e->ev_subsys == 0xff && e->ev_event == 0xff) { 1848 /* 1849 * Under some circumstances, we've seen all 1s to represent 1850 * a manually cleared event log at the BSC prompt. Only 1851 * a test/diagnosis environment is likely to show this. 1852 */ 1853 BSCV_TRACE(ssp, 'E', "bscv_is_null_event", "0xffff null event"); 1854 return (B_TRUE); 1855 } else { 1856 /* 1857 * Not a NULL event. 1858 */ 1859 BSCV_TRACE(ssp, 'E', "bscv_is_null_event", "returning False"); 1860 return (B_FALSE); 1861 } 1862 } 1863 1864 /* 1865 * ********************************************************************* 1866 * IOCTL Processing 1867 * ********************************************************************* 1868 */ 1869 1870 /* 1871 * function - bscv_ioctl 1872 * description - routine that acts as a high level manager for ioctls. It 1873 * calls the appropriate handler for ioctls on the alarm:mon and 1874 * alarm:ctl minor nodes respectively 1875 * 1876 * Unsupported ioctls (now deprecated) 1877 * LOMIOCALCTL 1878 * LOMIOCALSTATE 1879 * LOMIOCCLEARLOG 1880 * LOMIOCCTL 1881 * LOMIOCCTL2 1882 * LOMIOCDAEMON 1883 * LOMIOCDMON 1884 * LOMIOCDOGCTL, TSIOCDOGCTL 1885 * LOMIOCDOGPAT, TSIOCDOGPAT 1886 * LOMIOCDOGTIME, TSIOCDOGTIME 1887 * LOMIOCEVENTLOG 1888 * LOMIOCEVNT 1889 * LOMIOCGETMASK 1890 * LOMIOCMPROG 1891 * LOMIOCNBMON, TSIOCNBMON 1892 * LOMIOCSLEEP 1893 * LOMIOCUNLOCK, TSIOCUNLOCK 1894 * LOMIOCWTMON, TSIOCWTMON 1895 * 1896 * Supported ioctls 1897 * LOMIOCDOGSTATE, TSIOCDOGSTATE 1898 * LOMIOCPROG 1899 * LOMIOCPSUSTATE 1900 * LOMIOCFANSTATE 1901 * LOMIOCFLEDSTATE 1902 * LOMIOCINFO 1903 * LOMIOCMREAD 1904 * LOMIOCVOLTS 1905 * LOMIOCSTATS 1906 * LOMIOCTEMP 1907 * LOMIOCCONS 1908 * LOMIOCEVENTLOG2 1909 * LOMIOCINFO2 1910 * LOMIOCTEST 1911 * LOMIOCMPROG2 1912 * LOMIOCMREAD2 1913 * 1914 * inputs - device number, command, user space arg, filemode, user 1915 * credentials, return value 1916 * outputs - the return value propagated back by the lower level routines. 1917 */ 1918 1919 /*ARGSUSED*/ 1920 static int 1921 bscv_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *cred, int *rvalp) 1922 { 1923 bscv_soft_state_t *ssp; 1924 int instance; 1925 int res = 0; 1926 1927 instance = DEVICETOINSTANCE(dev); 1928 ssp = ddi_get_soft_state(bscv_statep, instance); 1929 if (ssp == NULL) { 1930 return (ENXIO); 1931 } 1932 1933 /* 1934 * The Combined Switch and Service Processor takes care of configuration 1935 * and control. The CSSP tells the BSC chip about it; therefore the 1936 * bscv driver doesn't send such configuration and control to the BSC. 1937 * Additionally Watchdog configuration is no longer done from userland 1938 * lom. 1939 */ 1940 switch (cmd) { 1941 case LOMIOCALCTL: 1942 case LOMIOCALSTATE: 1943 case LOMIOCCLEARLOG: 1944 case LOMIOCCTL: 1945 case LOMIOCCTL2: 1946 case LOMIOCDAEMON: 1947 case LOMIOCDMON: 1948 case LOMIOCDOGCTL: 1949 case LOMIOCDOGPAT: 1950 case LOMIOCDOGTIME: 1951 case LOMIOCEVENTLOG: 1952 case LOMIOCEVNT: 1953 case LOMIOCGETMASK: 1954 case LOMIOCMPROG: 1955 case LOMIOCNBMON: 1956 case LOMIOCSLEEP: 1957 case LOMIOCUNLOCK: 1958 case LOMIOCWTMON: 1959 return (ENOTSUP); 1960 } 1961 1962 /* 1963 * set the default result. 1964 */ 1965 1966 *rvalp = 0; 1967 1968 if (ssp->cssp_prog) { 1969 return (ENXIO); 1970 } else if ((ssp->prog_mode_only || ssp->programming) && 1971 cmd != LOMIOCPROG) { 1972 return (ENXIO); 1973 } 1974 1975 /* 1976 * Check that the caller has appropriate access permissions 1977 * (FWRITE set in mode) for those ioctls which change lom 1978 * state 1979 */ 1980 if (!(mode & FWRITE)) { 1981 switch (cmd) { 1982 case LOMIOCMPROG2: 1983 case LOMIOCMREAD2: 1984 case LOMIOCPROG: 1985 case LOMIOCTEST: 1986 return (EACCES); 1987 /* NOTREACHED */ 1988 default: 1989 /* Does not require write access */ 1990 break; 1991 } 1992 } 1993 1994 switch (cmd) { 1995 1996 case LOMIOCDOGSTATE: 1997 res = bscv_ioc_dogstate(ssp, arg, mode); 1998 break; 1999 2000 case LOMIOCPROG: 2001 res = bscv_prog(ssp, arg, mode); 2002 break; 2003 2004 case LOMIOCPSUSTATE: 2005 res = bscv_ioc_psustate(ssp, arg, mode); 2006 break; 2007 2008 case LOMIOCFANSTATE: 2009 res = bscv_ioc_fanstate(ssp, arg, mode); 2010 break; 2011 2012 case LOMIOCFLEDSTATE: 2013 res = bscv_ioc_fledstate(ssp, arg, mode); 2014 break; 2015 2016 case LOMIOCLEDSTATE: 2017 res = bscv_ioc_ledstate(ssp, arg, mode); 2018 break; 2019 2020 case LOMIOCINFO: 2021 res = bscv_ioc_info(ssp, arg, mode); 2022 break; 2023 2024 case LOMIOCMREAD: 2025 res = bscv_ioc_mread(ssp, arg, mode); 2026 break; 2027 2028 case LOMIOCVOLTS: 2029 res = bscv_ioc_volts(ssp, arg, mode); 2030 break; 2031 2032 case LOMIOCSTATS: 2033 res = bscv_ioc_stats(ssp, arg, mode); 2034 break; 2035 2036 case LOMIOCTEMP: 2037 res = bscv_ioc_temp(ssp, arg, mode); 2038 break; 2039 2040 case LOMIOCCONS: 2041 res = bscv_ioc_cons(ssp, arg, mode); 2042 break; 2043 2044 case LOMIOCEVENTLOG2: 2045 res = bscv_ioc_eventlog2(ssp, arg, mode); 2046 break; 2047 2048 case LOMIOCINFO2: 2049 res = bscv_ioc_info2(ssp, arg, mode); 2050 break; 2051 2052 case LOMIOCTEST: 2053 res = bscv_ioc_test(ssp, arg, mode); 2054 break; 2055 2056 case LOMIOCMPROG2: 2057 res = bscv_ioc_mprog2(ssp, arg, mode); 2058 break; 2059 2060 case LOMIOCMREAD2: 2061 res = bscv_ioc_mread2(ssp, arg, mode); 2062 break; 2063 2064 default: 2065 BSCV_TRACE(ssp, 'I', "bscv_ioctl", "Invalid IOCTL 0x%x", cmd); 2066 res = EINVAL; 2067 } 2068 return (res); 2069 } 2070 2071 /* 2072 * LOMIOCDOGSTATE 2073 * TSIOCDOGSTATE - indicate whether the alarm watchdog and reset 2074 * circuitry is enabled or not. 2075 */ 2076 static int 2077 bscv_ioc_dogstate(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2078 { 2079 lom_dogstate_t dogstate; 2080 uint8_t dogval; 2081 int res = 0; 2082 2083 dogval = bscv_get8_locked(ssp, chan_general, EBUS_IDX_WDOG_CTRL, &res); 2084 dogstate.dog_enable = (dogval & EBUS_WDOG_ENABLE) ? 1 : 0; 2085 dogstate.reset_enable = (dogval & EBUS_WDOG_RST) ? 1 : 0; 2086 dogstate.dog_timeout = bscv_get8_locked(ssp, chan_general, 2087 EBUS_IDX_WDOG_TIME, &res); 2088 2089 if ((res == 0) && 2090 (ddi_copyout((caddr_t)&dogstate, 2091 (caddr_t)arg, sizeof (dogstate), mode) < 0)) { 2092 res = EFAULT; 2093 } 2094 return (res); 2095 } 2096 2097 /* 2098 * LOMIOCPSUSTATE - returns full information for 4 PSUs. All this 2099 * information is available from two bytes of LOMlite RAM, but if 2100 * on the first read it is noticed that two or more of the PSUs are 2101 * not present only 1 byte will be read subsequently. 2102 */ 2103 static int 2104 bscv_ioc_psustate(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2105 { 2106 lom_psudata_t psudata; 2107 uint8_t psustat; 2108 int i; 2109 int res = 0; 2110 2111 for (i = 0; i < MAX_PSUS; i++) { 2112 psustat = bscv_get8_locked(ssp, chan_general, 2113 EBUS_IDX_PSU1_STAT + i, &res); 2114 psudata.fitted[i] = psustat & EBUS_PSU_PRESENT; 2115 psudata.output[i] = psustat & EBUS_PSU_OUTPUT; 2116 psudata.supplyb[i] = psustat & EBUS_PSU_INPUTB; 2117 psudata.supplya[i] = psustat & EBUS_PSU_INPUTA; 2118 psudata.standby[i] = psustat & EBUS_PSU_STANDBY; 2119 } 2120 2121 if (ddi_copyout((caddr_t)&psudata, (caddr_t)arg, sizeof (psudata), 2122 mode) < 0) { 2123 res = EFAULT; 2124 } 2125 return (res); 2126 } 2127 2128 /* 2129 * LOMIOCFANSTATE - returns full information including speed for 4 2130 * fans and the minimum and maximum operating speeds for each fan as 2131 * stored in the READ ONLY EEPROM data. As this EEPROM data is set 2132 * at manufacture time, this data should only be read by the driver 2133 * once and stored locally. 2134 */ 2135 static int 2136 bscv_ioc_fanstate(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2137 { 2138 lom_fandata_t fandata; 2139 int numfans; 2140 int i; 2141 int res = 0; 2142 2143 bzero(&fandata, sizeof (lom_fandata_t)); 2144 numfans = EBUS_CONFIG_NFAN_DEC(bscv_get8_locked(ssp, 2145 chan_general, EBUS_IDX_CONFIG, &res)); 2146 for (i = 0; (i < numfans) && (res == 0); i++) { 2147 if (ssp->fanspeed[i] != LOM_FAN_NOT_PRESENT) { 2148 fandata.fitted[i] = 1; 2149 fandata.speed[i] = ssp->fanspeed[i]; 2150 fandata.minspeed[i] = bscv_get8_cached(ssp, 2151 EBUS_IDX_FAN1_LOW + i); 2152 } 2153 } 2154 2155 if ((res == 0) && 2156 (ddi_copyout((caddr_t)&fandata, (caddr_t)arg, sizeof (fandata), 2157 mode) < 0)) { 2158 res = EFAULT; 2159 } 2160 return (res); 2161 } 2162 2163 /* 2164 * LOMIOCFLEDSTATE - returns the state of the fault LED 2165 */ 2166 static int 2167 bscv_ioc_fledstate(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2168 { 2169 lom_fled_info_t fled_info; 2170 uint8_t fledstate; 2171 int res = 0; 2172 2173 fledstate = bscv_get8_locked(ssp, chan_general, EBUS_IDX_ALARM, &res); 2174 2175 /* Decode of 0x0F is off and 0x00-0x07 is on. */ 2176 if (EBUS_ALARM_LED_DEC(fledstate) == 0x0F) { 2177 fled_info.on = 0; 2178 } else { 2179 /* has +1 here - not 2 as in the info ioctl */ 2180 fled_info.on = EBUS_ALARM_LED_DEC(fledstate) + 1; 2181 } 2182 if ((res == 0) && 2183 (ddi_copyout((caddr_t)&fled_info, (caddr_t)arg, 2184 sizeof (fled_info), mode) < 0)) { 2185 res = EFAULT; 2186 } 2187 return (res); 2188 } 2189 2190 /* 2191 * LOMIOCLEDSTATE - returns the state of the requested LED 2192 */ 2193 static int 2194 bscv_ioc_ledstate(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2195 { 2196 lom_led_state_t led_state; 2197 int fw_led_state; 2198 int res = 0; 2199 2200 /* copy in arguments supplied */ 2201 if (ddi_copyin((caddr_t)arg, (caddr_t)&led_state, 2202 sizeof (lom_led_state_t), mode) < 0) { 2203 return (EFAULT); 2204 } 2205 2206 /* 2207 * check if led index is -1, if so set it to max value for 2208 * this implementation. 2209 */ 2210 if (led_state.index == -1) { 2211 led_state.index = MAX_LED_ID; 2212 } 2213 2214 /* is the index in a valid range */ 2215 if ((led_state.index > MAX_LED_ID) || (led_state.index < 0)) { 2216 led_state.state = LOM_LED_OUTOFRANGE; 2217 } else { 2218 /* read the relevant led info */ 2219 fw_led_state = bscv_get8_locked(ssp, chan_general, 2220 EBUS_IDX_LED1_STATUS + led_state.index, &res); 2221 2222 /* set the state values accordingly */ 2223 switch (fw_led_state) { 2224 case LOM_LED_STATE_OFF: 2225 led_state.state = LOM_LED_OFF; 2226 led_state.colour = LOM_LED_COLOUR_ANY; 2227 break; 2228 case LOM_LED_STATE_ON_STEADY: 2229 led_state.state = LOM_LED_ON; 2230 led_state.colour = LOM_LED_COLOUR_ANY; 2231 break; 2232 case LOM_LED_STATE_ON_FLASHING: 2233 case LOM_LED_STATE_ON_SLOWFLASH: 2234 led_state.state = LOM_LED_BLINKING; 2235 led_state.colour = LOM_LED_COLOUR_ANY; 2236 break; 2237 case LOM_LED_STATE_NOT_PRESENT: 2238 led_state.state = LOM_LED_NOT_IMPLEMENTED; 2239 led_state.colour = LOM_LED_COLOUR_NONE; 2240 break; 2241 case LOM_LED_STATE_INACCESSIBLE: 2242 case LOM_LED_STATE_STANDBY: 2243 default: 2244 led_state.state = LOM_LED_ACCESS_ERROR; 2245 led_state.colour = LOM_LED_COLOUR_NONE; 2246 break; 2247 } 2248 2249 /* set the label info */ 2250 (void) strcpy(led_state.label, 2251 ssp->led_names[led_state.index]); 2252 } 2253 2254 /* copy out lom_state */ 2255 if ((res == 0) && 2256 (ddi_copyout((caddr_t)&led_state, (caddr_t)arg, 2257 sizeof (lom_led_state_t), mode) < 0)) { 2258 res = EFAULT; 2259 } 2260 return (res); 2261 } 2262 2263 /* 2264 * LOMIOCINFO - returns with a structure containing any information 2265 * stored on the LOMlite which a user should not need to access but 2266 * may be useful for diagnostic problems. The structure contains: the 2267 * serial escape character, alarm3 mode, version and checksum read from 2268 * RAM and the Product revision and ID read from EEPROM. 2269 */ 2270 static int 2271 bscv_ioc_info(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2272 { 2273 lom_info_t info; 2274 int i; 2275 uint16_t csum; 2276 int res = 0; 2277 2278 info.ser_char = bscv_get8_locked(ssp, chan_general, EBUS_IDX_ESCAPE, 2279 &res); 2280 info.a3mode = WATCHDOG; 2281 info.fver = bscv_get8_locked(ssp, chan_general, EBUS_IDX_FW_REV, &res); 2282 csum = bscv_get8_locked(ssp, chan_general, EBUS_IDX_CHECK_HI, &res) 2283 << 8; 2284 csum |= bscv_get8_locked(ssp, chan_general, EBUS_IDX_CHECK_LO, &res); 2285 info.fchksum = csum; 2286 info.prod_rev = bscv_get8_locked(ssp, chan_general, EBUS_IDX_MODEL_REV, 2287 &res); 2288 for (i = 0; i < sizeof (info.prod_id); i++) { 2289 info.prod_id[i] = bscv_get8_locked(ssp, 2290 chan_general, EBUS_IDX_MODEL_ID1 + i, &res); 2291 } 2292 if (bscv_get8_locked(ssp, chan_general, EBUS_IDX_ALARM, &res) & 2293 EBUS_ALARM_NOEVENTS) { 2294 info.events = OFF; 2295 } else { 2296 info.events = ON; 2297 } 2298 2299 if ((res == 0) && 2300 (ddi_copyout((caddr_t)&info, (caddr_t)arg, sizeof (info), 2301 mode) < 0)) { 2302 res = EFAULT; 2303 } 2304 return (res); 2305 } 2306 2307 /* 2308 * LOMIOCMREAD - used to query the LOMlite configuration parameters 2309 */ 2310 static int 2311 bscv_ioc_mread(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2312 { 2313 lom_mprog_t mprog; 2314 int i; 2315 int fanz; 2316 int res = 0; 2317 2318 for (i = 0; i < sizeof (mprog.mod_id); i++) { 2319 mprog.mod_id[i] = bscv_get8_locked(ssp, chan_general, 2320 EBUS_IDX_MODEL_ID1 + i, &res); 2321 } 2322 mprog.mod_rev = bscv_get8_locked(ssp, chan_general, EBUS_IDX_MODEL_REV, 2323 &res); 2324 mprog.config = bscv_get8_locked(ssp, chan_general, EBUS_IDX_CONFIG, 2325 &res); 2326 2327 /* Read the fan calibration values */ 2328 fanz = sizeof (mprog.fanhz) / sizeof (mprog.fanhz[0]); 2329 for (i = 0; i < fanz; i++) { 2330 mprog.fanhz[i] = bscv_get8_cached(ssp, 2331 EBUS_IDX_FAN1_CAL + i); 2332 mprog.fanmin[i] = bscv_get8_cached(ssp, 2333 EBUS_IDX_FAN1_LOW + i); 2334 } 2335 2336 if ((res == 0) && 2337 (ddi_copyout((caddr_t)&mprog, (caddr_t)arg, sizeof (mprog), 2338 mode) < 0)) { 2339 res = EFAULT; 2340 } 2341 return (res); 2342 } 2343 2344 /* 2345 * LOMIOCVOLTS 2346 */ 2347 static int 2348 bscv_ioc_volts(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2349 { 2350 int i; 2351 uint16_t supply; 2352 int res = 0; 2353 2354 supply = (bscv_get8_locked(ssp, chan_general, EBUS_IDX_SUPPLY_HI, &res) 2355 << 8) | bscv_get8_locked(ssp, chan_general, EBUS_IDX_SUPPLY_LO, 2356 &res); 2357 2358 for (i = 0; i < ssp->volts.num; i++) { 2359 ssp->volts.status[i] = (supply >> i) & 1; 2360 } 2361 2362 if ((res == 0) && 2363 (ddi_copyout((caddr_t)&ssp->volts, (caddr_t)arg, 2364 sizeof (ssp->volts), mode) < 0)) { 2365 res = EFAULT; 2366 } 2367 return (res); 2368 } 2369 2370 /* 2371 * LOMIOCSTATS 2372 */ 2373 static int 2374 bscv_ioc_stats(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2375 { 2376 int i; 2377 uint8_t status; 2378 int res = 0; 2379 2380 status = bscv_get8_locked(ssp, chan_general, EBUS_IDX_CBREAK_STATUS, 2381 &res); 2382 for (i = 0; i < ssp->sflags.num; i++) { 2383 ssp->sflags.status[i] = (int)((status >> i) & 1); 2384 } 2385 2386 if ((res == 0) && 2387 (ddi_copyout((caddr_t)&ssp->sflags, (caddr_t)arg, 2388 sizeof (ssp->sflags), mode) < 0)) { 2389 res = EFAULT; 2390 } 2391 return (res); 2392 } 2393 2394 /* 2395 * LOMIOCTEMP 2396 */ 2397 static int 2398 bscv_ioc_temp(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2399 { 2400 int i; 2401 int idx; 2402 uint8_t status_ov; 2403 lom_temp_t temps; 2404 int res = 0; 2405 2406 bzero(&temps, sizeof (temps)); 2407 idx = 0; 2408 for (i = 0; i < ssp->temps.num; i++) { 2409 if (ssp->temps.temp[i] != LOM_TEMP_STATE_NOT_PRESENT) { 2410 temps.temp[idx] = ssp->temps.temp[i]; 2411 bcopy(ssp->temps.name[i], temps.name[idx], 2412 sizeof (temps.name[idx])); 2413 temps.warning[idx] = ssp->temps.warning[i]; 2414 temps.shutdown[idx] = ssp->temps.shutdown[i]; 2415 idx++; 2416 } 2417 } 2418 temps.num = idx; 2419 2420 bcopy(ssp->temps.name_ov, temps.name_ov, sizeof (temps.name_ov)); 2421 temps.num_ov = ssp->temps.num_ov; 2422 status_ov = bscv_get8_locked(ssp, chan_general, EBUS_IDX_OTEMP_STATUS, 2423 &res); 2424 for (i = 0; i < ssp->temps.num_ov; i++) { 2425 ssp->temps.status_ov[i] = (status_ov >> i) & 1; 2426 } 2427 2428 if ((res == 0) && 2429 (ddi_copyout((caddr_t)&temps, (caddr_t)arg, sizeof (temps), 2430 mode) < 0)) { 2431 res = EFAULT; 2432 } 2433 return (res); 2434 } 2435 2436 /* 2437 * LOMIOCCONS 2438 */ 2439 static int 2440 bscv_ioc_cons(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2441 { 2442 lom_cbuf_t cbuf; 2443 int datasize; 2444 int res = 0; 2445 2446 bzero(&cbuf, sizeof (cbuf)); 2447 datasize = EBUS_IDX1_CONS_BUF_END - EBUS_IDX1_CONS_BUF_START + 1; 2448 /* Ensure that we do not overfill cbuf and that it is NUL terminated */ 2449 if (datasize > (sizeof (cbuf) - 1)) { 2450 datasize = sizeof (cbuf) - 1; 2451 } 2452 bscv_rep_get8_locked(ssp, chan_general, (uint8_t *)cbuf.lrbuf, 2453 BSCVA(EBUS_CMD_SPACE1, (EBUS_IDX1_CONS_BUF_END - datasize + 1)), 2454 datasize, DDI_DEV_AUTOINCR, &res); 2455 /* This is always within the array due to the checks above */ 2456 cbuf.lrbuf[datasize] = '\0'; 2457 2458 if ((res == 0) && 2459 (ddi_copyout((caddr_t)&cbuf, (caddr_t)arg, sizeof (cbuf), 2460 mode) < 0)) { 2461 res = EFAULT; 2462 } 2463 return (res); 2464 } 2465 2466 /* 2467 * LOMIOCEVENTLOG2 2468 */ 2469 static int 2470 bscv_ioc_eventlog2(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2471 { 2472 lom_eventlog2_t *eventlog2; 2473 int events_recorded; 2474 int level; 2475 uint16_t next_offset; 2476 lom_event_t event; 2477 int res = 0; 2478 2479 eventlog2 = (lom_eventlog2_t *)kmem_zalloc(sizeof (*eventlog2), 2480 KM_SLEEP); 2481 2482 /* 2483 * First get number of events and level requested. 2484 */ 2485 2486 if (ddi_copyin((caddr_t)arg, (caddr_t)eventlog2, 2487 sizeof (lom_eventlog2_t), mode) < 0) { 2488 kmem_free((void *)eventlog2, sizeof (*eventlog2)); 2489 return (EFAULT); 2490 } 2491 2492 bscv_enter(ssp); 2493 2494 /* 2495 * OK we have full private access to the LOM now so loop 2496 * over the eventlog addr spaces until we get the required 2497 * number of events. 2498 */ 2499 2500 if (!bscv_window_setup(ssp)) { 2501 res = EIO; 2502 bscv_exit(ssp); 2503 kmem_free((void *)eventlog2, sizeof (*eventlog2)); 2504 return (res); 2505 } 2506 2507 /* 2508 * Read count, next event ptr MSB,LSB. Note a read of count 2509 * is necessary to latch values for the next event ptr 2510 */ 2511 (void) bscv_get8(ssp, chan_general, EBUS_IDX_UNREAD_EVENTS); 2512 next_offset = bscv_get16(ssp, chan_general, EBUS_IDX_LOG_PTR_HI); 2513 BSCV_TRACE(ssp, 'I', "bscv_ioc_eventlog2", "log_ptr_hi 0x%x", 2514 next_offset); 2515 2516 events_recorded = 0; 2517 2518 while (events_recorded < eventlog2->num) { 2519 /* 2520 * Working backwards - read an event at a time. 2521 * next_offset is one event on from where we want to be! 2522 * Decrement next_offset and maybe wrap to the end of the 2523 * buffer. 2524 * Note the unsigned arithmetic, so check values first! 2525 */ 2526 if (next_offset <= ssp->eventlog_start) { 2527 /* Wrap to the end of the buffer */ 2528 next_offset = ssp->eventlog_start + ssp->eventlog_size; 2529 BSCV_TRACE(ssp, 'I', "bscv_ioc_eventlog2", "wrapping" 2530 " around to end of buffer; next_offset 0x%x", 2531 next_offset); 2532 } 2533 next_offset -= sizeof (event); 2534 2535 if (bscv_eerw(ssp, next_offset, (uint8_t *)&event, 2536 sizeof (event), B_FALSE /* read */) != 0) { 2537 /* Fault reading data - stop */ 2538 BSCV_TRACE(ssp, 'I', "bscv_ioc_eventlog2", "read" 2539 " failure for offset 0x%x", next_offset); 2540 res = EIO; 2541 break; 2542 } 2543 2544 if (bscv_is_null_event(ssp, &event)) { 2545 /* 2546 * No more events in this log so give up. 2547 */ 2548 BSCV_TRACE(ssp, 'I', "bscv_ioc_eventlog2", "no more" 2549 " events left at offset 0x%x", next_offset); 2550 break; 2551 } 2552 2553 /* 2554 * Are we interested in this event 2555 */ 2556 2557 level = bscv_level_of_event(&event); 2558 if (level <= eventlog2->level) { 2559 /* Arggh why the funny byte ordering 3, 2, 0, 1 */ 2560 eventlog2->code[events_recorded] = 2561 ((unsigned)event.ev_event | 2562 ((unsigned)event.ev_subsys << 8) | 2563 ((unsigned)event.ev_resource << 16) | 2564 ((unsigned)event.ev_detail << 24)); 2565 2566 eventlog2->time[events_recorded] = 2567 ((unsigned)event.ev_data[0] | 2568 ((unsigned)event.ev_data[1] << 8) | 2569 ((unsigned)event.ev_data[3] << 16) | 2570 ((unsigned)event.ev_data[2] << 24)); 2571 2572 bscv_build_eventstring(ssp, 2573 &event, eventlog2->string[events_recorded], 2574 eventlog2->string[events_recorded] + 2575 sizeof (eventlog2->string[events_recorded])); 2576 events_recorded++; 2577 } 2578 } 2579 2580 eventlog2->num = events_recorded; 2581 2582 bscv_exit(ssp); 2583 2584 if ((res == 0) && 2585 (ddi_copyout((caddr_t)eventlog2, (caddr_t)arg, 2586 sizeof (lom_eventlog2_t), mode) < 0)) { 2587 res = EFAULT; 2588 } 2589 2590 kmem_free((void *)eventlog2, sizeof (lom_eventlog2_t)); 2591 return (res); 2592 } 2593 2594 /* 2595 * LOMIOCINFO2 2596 */ 2597 static int 2598 bscv_ioc_info2(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2599 { 2600 lom2_info_t info2; 2601 int i; 2602 uint16_t csum; 2603 int res = 0; 2604 2605 bzero(&info2, sizeof (info2)); 2606 2607 (void) strncpy(info2.escape_chars, ssp->escape_chars, 2608 sizeof (info2.escape_chars)); 2609 info2.serial_events = ssp->reporting_level | ssp->serial_reporting; 2610 info2.a3mode = WATCHDOG; 2611 2612 info2.fver = bscv_get8_locked(ssp, chan_general, EBUS_IDX_FW_REV, &res); 2613 csum = bscv_get8_locked(ssp, chan_general, EBUS_IDX_CHECK_HI, &res) 2614 << 8; 2615 csum |= bscv_get8_locked(ssp, chan_general, EBUS_IDX_CHECK_LO, &res); 2616 info2.fchksum = csum; 2617 info2.prod_rev = bscv_get8_locked(ssp, chan_general, 2618 EBUS_IDX_MODEL_REV, &res); 2619 for (i = 0; i < sizeof (info2.prod_id); i++) { 2620 info2.prod_id[i] = bscv_get8_locked(ssp, chan_general, 2621 EBUS_IDX_MODEL_ID1 + i, &res); 2622 } 2623 info2.serial_config = bscv_get8_locked(ssp, chan_general, 2624 EBUS_IDX_SER_TIMEOUT, &res); 2625 if (bscv_get8_locked(ssp, chan_general, EBUS_IDX_CONFIG_MISC, &res) & 2626 EBUS_CONFIG_MISC_SECURITY_ENABLED) { 2627 info2.serial_config |= LOM_SER_SECURITY; 2628 } 2629 if (bscv_get8_locked(ssp, chan_general, EBUS_IDX_CONFIG_MISC, &res) & 2630 EBUS_CONFIG_MISC_AUTO_CONSOLE) { 2631 info2.serial_config |= LOM_SER_RETURN; 2632 } 2633 if (bscv_get8_locked(ssp, chan_general, EBUS_IDX_WDOG_CTRL, &res) & 2634 EBUS_WDOG_BREAK_DISABLE) { 2635 info2.serial_config |= LOM_DISABLE_WDOG_BREAK; 2636 } 2637 info2.baud_rate = bscv_get8_locked(ssp, chan_general, 2638 EBUS_IDX_SER_BAUD, &res); 2639 info2.serial_hw_config = 2640 ((int)bscv_get8_locked(ssp, chan_general, 2641 EBUS_IDX_SER_CHARMODE, &res) | 2642 ((int)bscv_get8_locked(ssp, chan_general, 2643 EBUS_IDX_SER_FLOWCTL, &res) << 8) | 2644 ((int)bscv_get8_locked(ssp, chan_general, 2645 EBUS_IDX_SER_MODEMTYPE, &res) << 16)); 2646 2647 /* 2648 * There is no phone home support on the blade platform. We hardcode 2649 * FALSE and NUL for config and script respectively. 2650 */ 2651 info2.phone_home_config = B_FALSE; 2652 info2.phone_home_script[0] = '\0'; 2653 2654 for (i = 0; i < ssp->num_fans; i++) { 2655 (void) strcpy(info2.fan_names[i], ssp->fan_names[i]); 2656 } 2657 2658 if ((res == 0) && 2659 (ddi_copyout((caddr_t)&info2, (caddr_t)arg, sizeof (info2), 2660 mode) < 0)) { 2661 res = EFAULT; 2662 } 2663 return (res); 2664 } 2665 2666 /* 2667 * LOMIOCTEST 2668 */ 2669 static int 2670 bscv_ioc_test(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2671 { 2672 uint32_t test; 2673 uint8_t testnum; 2674 uint8_t testarg; 2675 int res = 0; 2676 2677 if (ddi_copyin((caddr_t)arg, (caddr_t)&test, sizeof (test), 2678 mode) < 0) { 2679 return (EFAULT); 2680 } 2681 2682 /* 2683 * Extract num iterations. 2684 */ 2685 2686 testarg = (test & 0xff00) >> 8; 2687 testnum = test & 0xff; 2688 2689 BSCV_TRACE(ssp, 'F', "bscv_ioc_test", 2690 "LOMIOCTEST data 0x%x (test 0x%x, arg 0x%x)", 2691 test, (EBUS_IDX_SELFTEST0 + testnum), testarg); 2692 2693 switch (testnum + EBUS_IDX_SELFTEST0) { 2694 default: 2695 /* Invalid test */ 2696 res = EINVAL; 2697 break; 2698 2699 case EBUS_IDX_SELFTEST0: /* power on self-test result */ 2700 case EBUS_IDX_SELFTEST1: /* not used currently */ 2701 case EBUS_IDX_SELFTEST2: /* not used currently */ 2702 case EBUS_IDX_SELFTEST3: /* not used currently */ 2703 case EBUS_IDX_SELFTEST4: /* not used currently */ 2704 case EBUS_IDX_SELFTEST5: /* not used currently */ 2705 case EBUS_IDX_SELFTEST6: /* LED self-test */ 2706 case EBUS_IDX_SELFTEST7: /* platform-specific tests */ 2707 /* Run the test */ 2708 2709 /* Stop other things and then run the test */ 2710 bscv_enter(ssp); 2711 2712 /* 2713 * Then we simply write the argument to the relevant register 2714 * and wait for the return code. 2715 */ 2716 bscv_put8(ssp, chan_general, 2717 EBUS_IDX_SELFTEST0 + testnum, testarg); 2718 if (bscv_faulty(ssp)) { 2719 res = EIO; 2720 } else { 2721 /* Get hold of the SunVTS error code */ 2722 test = bscv_retcode(ssp); 2723 } 2724 2725 bscv_exit(ssp); 2726 break; 2727 } 2728 2729 BSCV_TRACE(ssp, 'F', "bscv_ioc_test", 2730 "LOMIOCTEST status 0x%x, res 0x%x", test, res); 2731 if ((res == 0) && 2732 (ddi_copyout((caddr_t)&test, (caddr_t)arg, sizeof (test), 2733 mode) < 0)) { 2734 res = EFAULT; 2735 } 2736 return (res); 2737 } 2738 2739 /* 2740 * LOMIOCMPROG2 2741 */ 2742 static int 2743 bscv_ioc_mprog2(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2744 { 2745 lom2_mprog_t mprog2; 2746 uint32_t base_addr; 2747 uint32_t data_size; 2748 uint32_t eeprom_size; 2749 int res = 0; 2750 2751 if (ddi_copyin((caddr_t)arg, (caddr_t)&mprog2, sizeof (mprog2), 2752 mode) < 0) { 2753 return (EFAULT); 2754 } 2755 2756 /* 2757 * Note that originally this was accessed as 255 byte pages 2758 * in address spaces 240-255. We have to emulate this behaviour. 2759 */ 2760 if ((mprog2.addr_space < 240) || (mprog2.addr_space > 255)) { 2761 return (EINVAL); 2762 } 2763 2764 bscv_enter(ssp); 2765 2766 /* Calculate required data location */ 2767 data_size = 255; 2768 base_addr = (mprog2.addr_space - 240) * data_size; 2769 2770 eeprom_size = bscv_get8(ssp, chan_general, EBUS_IDX_EEPROM_SIZE_KB) * 2771 1024; 2772 2773 if (bscv_faulty(ssp)) { 2774 bscv_exit(ssp); 2775 return (EIO); 2776 } else if ((base_addr + data_size) > eeprom_size) { 2777 BSCV_TRACE(ssp, 'M', "bscv_ioc_mprog2", 2778 "Request extends past end of eeprom"); 2779 bscv_exit(ssp); 2780 return (ENXIO); 2781 } 2782 2783 bscv_put8(ssp, chan_general, EBUS_IDX_CMD_RES, EBUS_CMD_UNLOCK1); 2784 if (bscv_faulty(ssp)) { 2785 BSCV_TRACE(ssp, 'M', "bscv_ioc_mprog2", "ML1 Write failed"); 2786 bscv_exit(ssp); 2787 return (EIO); 2788 } 2789 2790 bscv_put8(ssp, chan_general, EBUS_IDX_CMD_RES, EBUS_CMD_UNLOCK2); 2791 if (bscv_faulty(ssp)) { 2792 BSCV_TRACE(ssp, 'M', "bscv_ioc_mprog2", "ML2 Write failed"); 2793 bscv_exit(ssp); 2794 return (EIO); 2795 } 2796 2797 if (bscv_eerw(ssp, base_addr, &mprog2.data[0], 2798 data_size, B_TRUE /* write */) != 0) { 2799 res = EIO; 2800 } 2801 2802 /* Read a probe key to release the lock. */ 2803 (void) bscv_get8(ssp, chan_general, EBUS_IDX_PROBEAA); 2804 2805 if (bscv_faulty(ssp)) { 2806 res = EIO; 2807 } 2808 bscv_exit(ssp); 2809 2810 return (res); 2811 } 2812 2813 /* 2814 * LOMIOCMREAD2 2815 */ 2816 static int 2817 bscv_ioc_mread2(bscv_soft_state_t *ssp, intptr_t arg, int mode) 2818 { 2819 lom2_mprog_t mprog2; 2820 uint32_t base_addr; 2821 uint32_t data_size; 2822 uint32_t eeprom_size; 2823 int res = 0; 2824 2825 if (ddi_copyin((caddr_t)arg, (caddr_t)&mprog2, sizeof (mprog2), 2826 mode) < 0) { 2827 return (EFAULT); 2828 } 2829 2830 /* 2831 * Need to stop the queue and then just read 2832 * the bytes blind to the relevant addresses. 2833 * Note that originally this was accessed as 255 byte pages 2834 * in address spaces 240-255. We have to emulate this behaviour. 2835 */ 2836 if ((mprog2.addr_space < 240) || (mprog2.addr_space > 255)) { 2837 return (EINVAL); 2838 } 2839 2840 bscv_enter(ssp); 2841 2842 /* Calculate required data location */ 2843 data_size = 255; 2844 base_addr = (mprog2.addr_space - 240) * data_size; 2845 eeprom_size = bscv_get8(ssp, chan_general, EBUS_IDX_EEPROM_SIZE_KB) * 2846 1024; 2847 2848 if (bscv_faulty(ssp)) { 2849 bscv_exit(ssp); 2850 return (EIO); 2851 } else if ((base_addr + data_size) > eeprom_size) { 2852 BSCV_TRACE(ssp, 'M', "bscv_ioc_mread2", 2853 "Request extends past end of eeprom"); 2854 bscv_exit(ssp); 2855 return (ENXIO); 2856 } 2857 2858 if (bscv_eerw(ssp, base_addr, &mprog2.data[0], 2859 data_size, B_FALSE /* read */) != 0) { 2860 res = EIO; 2861 } 2862 2863 if (bscv_faulty(ssp)) { 2864 res = EIO; 2865 } 2866 bscv_exit(ssp); 2867 2868 if ((res == 0) && 2869 (ddi_copyout((caddr_t)&mprog2, (caddr_t)arg, sizeof (mprog2), 2870 mode) < 0)) { 2871 res = EFAULT; 2872 } 2873 return (res); 2874 } 2875 2876 static void 2877 bscv_get_state_changes(bscv_soft_state_t *ssp) 2878 { 2879 int i = STATUS_READ_LIMIT; 2880 uint8_t change; 2881 uint8_t detail; 2882 2883 ASSERT(bscv_held(ssp)); 2884 2885 while (i-- && !ssp->cssp_prog) { 2886 /* Are there any changes to process? */ 2887 change = bscv_get8(ssp, chan_general, EBUS_IDX_STATE_CHNG); 2888 change &= EBUS_STATE_MASK; 2889 if (!change) 2890 break; 2891 2892 /* Clarify the pending change */ 2893 detail = bscv_get8(ssp, chan_general, EBUS_IDX_EVENT_DETAIL); 2894 2895 bscv_status(ssp, change, detail); 2896 } 2897 2898 BSCV_TRACE(ssp, 'D', "bscv_get_state_changes", 2899 "loop index %d ssp->cssp_prog 0x%x", i, ssp->cssp_prog); 2900 } 2901 2902 /* 2903 * ********************************************************************* 2904 * Event Processing 2905 * ********************************************************************* 2906 */ 2907 2908 /* 2909 * function - bscv_event_daemon 2910 * description - Perform periodic lom tasks in a separate thread. 2911 * inputs - LOM soft state structure pointer 2912 * outputs - none. 2913 */ 2914 static void 2915 bscv_event_daemon(void *arg) 2916 { 2917 bscv_soft_state_t *ssp = (void *)arg; 2918 boolean_t do_events; 2919 boolean_t do_status; 2920 boolean_t do_nodename; 2921 boolean_t do_watchdog; 2922 uint32_t async_reg; 2923 uint32_t fault; 2924 clock_t poll_period = BSC_EVENT_POLL_NORMAL; 2925 int fault_cnt = 0; 2926 2927 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 2928 "bscv_event_daemon: started"); 2929 2930 /* Acquire task daemon lock. */ 2931 mutex_enter(&ssp->task_mu); 2932 2933 ssp->task_flags |= TASK_ALIVE_FLG; 2934 2935 for (;;) { 2936 if ((ssp->task_flags & TASK_STOP_FLG) != 0) { 2937 /* Stop request seen - terminate */ 2938 break; 2939 } 2940 if ((ssp->task_flags & TASK_PAUSE_FLG) == 0) { 2941 /* Poll for events reported to the nexus */ 2942 mutex_exit(&ssp->task_mu); 2943 /* Probe and Check faults */ 2944 bscv_enter(ssp); 2945 async_reg = bscv_probe(ssp, chan_general, &fault); 2946 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 2947 "process event: async_reg 0x%x, fault 0x%x", 2948 async_reg, fault); 2949 2950 if (!fault) { 2951 /* Treat non-fault conditions */ 2952 2953 if (ssp->cssp_prog || ssp->prog_mode_only) { 2954 /* 2955 * The BSC has become available again. 2956 */ 2957 fault_cnt = 0; 2958 ssp->cssp_prog = B_FALSE; 2959 ssp->prog_mode_only = B_FALSE; 2960 (void) bscv_attach_common(ssp); 2961 } else if (fault_cnt > 0) { 2962 /* Previous fault has cleared */ 2963 bscv_clear_fault(ssp); 2964 fault_cnt = 0; 2965 cmn_err(CE_WARN, 2966 "!bscv_event_daemon previous fault " 2967 "cleared."); 2968 } else if (bscv_faulty(ssp)) { 2969 /* Previous fault has cleared */ 2970 bscv_clear_fault(ssp); 2971 /* Sleep to avoid busy waiting */ 2972 ssp->event_sleep = B_TRUE; 2973 } 2974 poll_period = BSC_EVENT_POLL_NORMAL; 2975 2976 if (async_reg) { 2977 ssp->status_change = B_TRUE; 2978 ssp->event_waiting = B_TRUE; 2979 } 2980 } else if (ssp->cssp_prog) { 2981 /* 2982 * Expect radio silence or error values 2983 * when the CSSP is upgrading the BSC firmware 2984 * so throw away any fault indication. 2985 */ 2986 fault = B_FALSE; 2987 } else if (fault_cnt == BSC_PROBE_FAULT_LIMIT) { 2988 /* Count previous faults and maybe fail */ 2989 /* Declare the lom broken */ 2990 bscv_set_fault(ssp); 2991 poll_period = BSC_EVENT_POLL_FAULTY; 2992 cmn_err(CE_WARN, 2993 "!bscv_event_daemon had faults probing " 2994 "lom - marking it as faulty."); 2995 /* 2996 * Increment fault_cnt to ensure that 2997 * next time we do not report a message 2998 * i.e. we drop out of the bottom 2999 */ 3000 fault_cnt = BSC_PROBE_FAULT_LIMIT + 1; 3001 ssp->event_sleep = B_TRUE; 3002 } else if (fault_cnt < BSC_PROBE_FAULT_LIMIT) { 3003 if (bscv_faulty(ssp)) { 3004 poll_period = BSC_EVENT_POLL_FAULTY; 3005 /* 3006 * No recovery messages in this case 3007 * because there was never a fault 3008 * message here. 3009 */ 3010 fault_cnt = 0; 3011 } else { 3012 /* Getting ready to explode */ 3013 fault_cnt++; 3014 cmn_err(CE_WARN, 3015 "!bscv_event_daemon had fault 0x%x", 3016 fault); 3017 } 3018 ssp->event_sleep = B_TRUE; 3019 } 3020 bscv_exit(ssp); 3021 mutex_enter(&ssp->task_mu); 3022 } 3023 3024 #if defined(__i386) || defined(__amd64) 3025 /* 3026 * we have no platmod hook on Solaris x86 to report 3027 * a change to the nodename so we keep a copy so 3028 * we can detect a change and request that the bsc 3029 * be updated when appropriate. 3030 */ 3031 if (strcmp(ssp->last_nodename, utsname.nodename) != 0) { 3032 3033 BSCV_TRACE(ssp, 'X', "bscv_event_daemon", 3034 "utsname.nodename='%s' possible change detected", 3035 utsname.nodename); 3036 ssp->nodename_change = B_TRUE; 3037 (void) strncpy(ssp->last_nodename, utsname.nodename, 3038 sizeof (ssp->last_nodename)); 3039 /* enforce null termination */ 3040 ssp->last_nodename[sizeof (ssp->last_nodename) - 1] = 3041 '\0'; 3042 } 3043 #endif /* __i386 || __amd64 */ 3044 3045 if (((ssp->task_flags & TASK_PAUSE_FLG) == 0) && 3046 fault_cnt == 0 && ssp->cssp_prog == B_FALSE && 3047 (ssp->event_waiting || ssp->status_change || 3048 ssp->nodename_change || ssp->watchdog_change)) { 3049 3050 do_events = ssp->event_waiting; 3051 ssp->event_waiting = B_FALSE; 3052 ssp->task_flags |= do_events ? 3053 TASK_EVENT_PENDING_FLG : 0; 3054 do_status = ssp->status_change; 3055 ssp->status_change = B_FALSE; 3056 do_nodename = ssp->nodename_change; 3057 ssp->nodename_change = B_FALSE; 3058 do_watchdog = ssp->watchdog_change; 3059 if (ssp->watchdog_change) { 3060 ssp->watchdog_change = B_FALSE; 3061 } 3062 3063 mutex_exit(&ssp->task_mu); 3064 /* 3065 * We must not hold task_mu whilst processing 3066 * events because this can lead to priority 3067 * inversion and hence our interrupts getting 3068 * locked out. 3069 */ 3070 bscv_enter(ssp); 3071 if (do_events) { 3072 bscv_event_process(ssp, do_events); 3073 } 3074 if (do_nodename) { 3075 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 3076 "do_nodename task"); 3077 bscv_setup_hostname(ssp); 3078 } 3079 if (do_watchdog) { 3080 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 3081 "do_watchdog task"); 3082 bscv_setup_watchdog(ssp); 3083 } 3084 /* 3085 * Pending status changes are dealt with last because 3086 * if we see that the BSC is about to be programmed, 3087 * then it will expect us to to quiescent in the 3088 * first second so it can cleanly tear down its comms 3089 * protocols; this takes ~100 ms. 3090 */ 3091 if (do_status) { 3092 bscv_get_state_changes(ssp); 3093 } 3094 if (bscv_session_error(ssp)) { 3095 /* 3096 * Had fault during event session. We always 3097 * sleep after one of these because there 3098 * may be a problem with the lom which stops 3099 * us doing useful work in the event daemon. 3100 * If we don't sleep then we may livelock. 3101 */ 3102 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 3103 "had session error - sleeping"); 3104 ssp->event_sleep = B_TRUE; 3105 } 3106 bscv_exit(ssp); 3107 3108 mutex_enter(&ssp->task_mu); 3109 3110 if (ssp->task_flags & TASK_EVENT_PENDING_FLG) { 3111 /* 3112 * We have read any events which were 3113 * pending. Let the consumer continue. 3114 * Ignore the race condition with new events 3115 * arriving - just let the consumer have 3116 * whatever was pending when they asked. 3117 */ 3118 ssp->event_active_count++; 3119 ssp->task_flags &= ~(TASK_EVENT_PENDING_FLG | 3120 TASK_EVENT_CONSUMER_FLG); 3121 cv_broadcast(&ssp->task_evnt_cv); 3122 } 3123 } else { 3124 /* There was nothing to do - sleep */ 3125 ssp->event_sleep = B_TRUE; 3126 } 3127 3128 if (ssp->event_sleep) { 3129 ssp->task_flags |= TASK_SLEEPING_FLG; 3130 /* Sleep until there is something to do */ 3131 (void) cv_reltimedwait(&ssp->task_cv, 3132 &ssp->task_mu, poll_period, TR_CLOCK_TICK); 3133 ssp->task_flags &= ~TASK_SLEEPING_FLG; 3134 ssp->event_sleep = B_FALSE; 3135 } 3136 } 3137 3138 if (ssp->task_flags & TASK_EVENT_CONSUMER_FLG) { 3139 /* 3140 * We are going away so wake up any event consumer. 3141 * Pretend that any pending events have been processed. 3142 */ 3143 ssp->event_active_count += 2; 3144 cv_broadcast(&ssp->task_evnt_cv); 3145 } 3146 3147 ASSERT(!(ssp->task_flags & TASK_EVENT_PENDING_FLG)); 3148 ssp->task_flags &= 3149 ~(TASK_STOP_FLG | TASK_ALIVE_FLG | TASK_EVENT_CONSUMER_FLG); 3150 mutex_exit(&ssp->task_mu); 3151 3152 BSCV_TRACE(ssp, 'D', "bscv_event_daemon", 3153 "exiting."); 3154 } 3155 3156 /* 3157 * function - bscv_start_event_daemon 3158 * description - Create the event daemon thread. 3159 * inputs - LOM soft state structure pointer 3160 * outputs - none 3161 */ 3162 static void 3163 bscv_start_event_daemon(bscv_soft_state_t *ssp) 3164 { 3165 if (ssp->progress & BSCV_THREAD) 3166 return; 3167 3168 /* Start the event thread after the queue has started */ 3169 (void) thread_create(NULL, 0, (void (*)())bscv_event_daemon, ssp, 3170 0, &p0, TS_RUN, minclsyspri); 3171 3172 ssp->progress |= BSCV_THREAD; 3173 } 3174 3175 /* 3176 * function - bscv_stop_event_daemon 3177 * description - Attempt to stop the event daemon thread. 3178 * inputs - LOM soft state structure pointer 3179 * outputs - DDI_SUCCESS OR DDI_FAILURE 3180 */ 3181 static int 3182 bscv_stop_event_daemon(bscv_soft_state_t *ssp) 3183 { 3184 int try; 3185 int res = DDI_SUCCESS; 3186 3187 mutex_enter(&ssp->task_mu); 3188 3189 /* Wait for task daemon to stop running. */ 3190 for (try = 0; 3191 ((ssp->task_flags & TASK_ALIVE_FLG) && try < 10); 3192 try++) { 3193 /* Signal that the task daemon should stop */ 3194 ssp->task_flags |= TASK_STOP_FLG; 3195 cv_signal(&ssp->task_cv); 3196 /* Release task daemon lock. */ 3197 mutex_exit(&ssp->task_mu); 3198 /* 3199 * TODO - when the driver is modified to support 3200 * system suspend or if this routine gets called 3201 * during panic we should use drv_usecwait() rather 3202 * than delay in those circumstances. 3203 */ 3204 delay(drv_usectohz(1000000)); 3205 mutex_enter(&ssp->task_mu); 3206 } 3207 3208 if (ssp->task_flags & TASK_ALIVE_FLG) { 3209 res = DDI_FAILURE; 3210 } 3211 mutex_exit(&ssp->task_mu); 3212 3213 return (res); 3214 } 3215 3216 /* 3217 * function - bscv_pause_event_daemon 3218 * description - Attempt to pause the event daemon thread. 3219 * inputs - LOM soft state structure pointer 3220 * outputs - DDI_SUCCESS OR DDI_FAILURE 3221 */ 3222 static int 3223 bscv_pause_event_daemon(bscv_soft_state_t *ssp) 3224 { 3225 int try; 3226 3227 if (!(ssp->progress & BSCV_THREAD)) { 3228 /* Nothing to do */ 3229 return (BSCV_SUCCESS); 3230 } 3231 3232 BSCV_TRACE(ssp, 'D', "bscv_pause_event_daemon", 3233 "Attempting to pause event daemon"); 3234 3235 mutex_enter(&ssp->task_mu); 3236 /* Signal that the task daemon should pause */ 3237 ssp->task_flags |= TASK_PAUSE_FLG; 3238 3239 /* Wait for task daemon to pause. */ 3240 for (try = 0; 3241 (!(ssp->task_flags & TASK_SLEEPING_FLG) && 3242 (ssp->task_flags & TASK_ALIVE_FLG) && 3243 try < 10); 3244 try++) { 3245 /* Paranoia */ 3246 ssp->task_flags |= TASK_PAUSE_FLG; 3247 cv_signal(&ssp->task_cv); 3248 /* Release task daemon lock. */ 3249 mutex_exit(&ssp->task_mu); 3250 delay(drv_usectohz(1000000)); 3251 mutex_enter(&ssp->task_mu); 3252 } 3253 if ((ssp->task_flags & TASK_SLEEPING_FLG) || 3254 !(ssp->task_flags & TASK_ALIVE_FLG)) { 3255 mutex_exit(&ssp->task_mu); 3256 BSCV_TRACE(ssp, 'D', "bscv_pause_event_daemon", 3257 "Pause event daemon - success"); 3258 return (BSCV_SUCCESS); 3259 } 3260 mutex_exit(&ssp->task_mu); 3261 BSCV_TRACE(ssp, 'D', "bscv_pause_event_daemon", 3262 "Pause event daemon - failed"); 3263 return (BSCV_FAILURE); 3264 } 3265 3266 /* 3267 * function - bscv_resume_event_daemon 3268 * description - Resumethe event daemon thread. 3269 * inputs - LOM soft state structure pointer 3270 * outputs - None. 3271 */ 3272 static void 3273 bscv_resume_event_daemon(bscv_soft_state_t *ssp) 3274 { 3275 if (!(ssp->progress & BSCV_THREAD)) { 3276 /* Nothing to do */ 3277 return; 3278 } 3279 3280 mutex_enter(&ssp->task_mu); 3281 /* Allow the task daemon to resume event processing */ 3282 ssp->task_flags &= ~TASK_PAUSE_FLG; 3283 cv_signal(&ssp->task_cv); 3284 mutex_exit(&ssp->task_mu); 3285 3286 BSCV_TRACE(ssp, 'D', "bscv_pause_event_daemon", 3287 "Event daemon resumed"); 3288 } 3289 3290 /* 3291 * function - bscv_event_process 3292 * description - process (report) events 3293 * inputs - Soft state ptr, process event request 3294 * outputs - none 3295 */ 3296 static void 3297 bscv_event_process(bscv_soft_state_t *ssp, boolean_t do_events) 3298 { 3299 uint32_t currptr; 3300 unsigned int count; 3301 3302 /* Raw values read from the lom */ 3303 uint8_t evcount; 3304 uint16_t logptr; 3305 3306 lom_event_t event; 3307 3308 if (do_events) { 3309 /* 3310 * Read count, next event ptr MSB,LSB. Note a read of count 3311 * latches values for the next event ptr 3312 */ 3313 evcount = bscv_get8(ssp, chan_general, EBUS_IDX_UNREAD_EVENTS); 3314 logptr = bscv_get16(ssp, chan_general, EBUS_IDX_LOG_PTR_HI); 3315 3316 /* Sanity check the values from the lom */ 3317 count = bscv_event_validate(ssp, logptr, evcount); 3318 3319 if (count == -1) { 3320 /* 3321 * Nothing to do - or badly configured event log. 3322 * We really do not want to touch the lom in this 3323 * case because any data that we access may be bad! 3324 * This differs from zero because if we have zero 3325 * to read the lom probably things that unread is 3326 * non-zero and we want that to be set to zero! 3327 * Signal event fault to make the thread wait 3328 * before attempting to re-read the log. 3329 */ 3330 ssp->event_sleep = B_TRUE; 3331 3332 goto logdone; 3333 } 3334 if (ssp->event_fault_reported) { 3335 /* Clear down any old status - things are fixed */ 3336 cmn_err(CE_NOTE, "Event pointer fault recovered."); 3337 ssp->event_fault_reported = B_FALSE; 3338 } 3339 3340 /* Compute the first entry that we need to read. */ 3341 currptr = logptr - ssp->eventlog_start; 3342 currptr += ssp->eventlog_size; 3343 currptr -= (count * sizeof (event)); 3344 currptr %= ssp->eventlog_size; 3345 currptr += ssp->eventlog_start; 3346 3347 BSCV_TRACE(ssp, 'E', "bscv_event_process", 3348 "processing %d events from 0x%x in 0x%x:0x%x", 3349 count, currptr, 3350 ssp->eventlog_start, 3351 ssp->eventlog_start + ssp->eventlog_size); 3352 3353 for (; count > 0; count--) { 3354 /* Ensure window is positioned correctly */ 3355 if (bscv_eerw(ssp, currptr, (uint8_t *)&event, 3356 sizeof (event), B_FALSE /* read */) != 0) { 3357 /* Fault reading data - stop */ 3358 break; 3359 } 3360 3361 bscv_event_process_one(ssp, &event); 3362 bscv_sysevent(ssp, &event); 3363 3364 currptr += sizeof (event); 3365 if (currptr >= ssp->eventlog_start + 3366 ssp->eventlog_size) { 3367 currptr = ssp->eventlog_start; 3368 } 3369 } 3370 /* 3371 * Clear event count - write the evcount value to remove that 3372 * many from the unread total. 3373 * Adjust the value to reflect how many we have left to 3374 * read just in case we had a failure reading events. 3375 */ 3376 if (count == 0) { 3377 /*EMPTY*/ 3378 ASSERT(logptr == currptr); 3379 } else if (count > evcount) { 3380 evcount = 0; 3381 } else { 3382 evcount -= count; 3383 } 3384 bscv_put8(ssp, chan_general, EBUS_IDX_UNREAD_EVENTS, evcount); 3385 /* Remember where we were for next time */ 3386 ssp->oldeeptr = currptr; 3387 ssp->oldeeptr_valid = B_TRUE; 3388 logdone: 3389 ; 3390 } 3391 } 3392 3393 /* 3394 * function - bscv_event_validate 3395 * description - validate the event data supplied by the lom and determine 3396 * how many (if any) events to read. 3397 * This function performs complex checks to ensure that 3398 * events are not lost due to lom resets or host resets. 3399 * A combination of lom reset and host reset (i.e. power fail) 3400 * may cause some events to not be reported. 3401 * inputs - Soft state ptr, next event pointer, number of unread events. 3402 * outputs - the number of events to read. -1 on error. 3403 * zero is a valid value because it forces the loms unread 3404 * count to be cleared. 3405 */ 3406 static int 3407 bscv_event_validate(bscv_soft_state_t *ssp, uint32_t newptr, uint8_t unread) 3408 { 3409 uint32_t oldptr; 3410 unsigned int count; 3411 3412 if (!bscv_window_setup(ssp)) { 3413 /* Problem with lom eeprom setup we cannot do anything */ 3414 return (-1); 3415 } 3416 3417 /* Sanity check the event pointers */ 3418 if ((newptr < ssp->eventlog_start) || 3419 (newptr >= (ssp->eventlog_start + ssp->eventlog_size))) { 3420 if (!ssp->event_fault_reported) { 3421 cmn_err(CE_WARN, "Event pointer out of range. " 3422 "Cannot read events."); 3423 ssp->event_fault_reported = B_TRUE; 3424 } 3425 return (-1); 3426 } 3427 oldptr = ssp->oldeeptr; 3428 /* Now sanity check log pointer against count */ 3429 if (newptr < oldptr) { 3430 /* 3431 * Must have wrapped add eventlog_size to get the 3432 * correct relative values - this makes the checks 3433 * below work! 3434 */ 3435 newptr += ssp->eventlog_size; 3436 } 3437 if (!ssp->oldeeptr_valid) { 3438 /* We have just started up - we have to trust lom */ 3439 count = unread; 3440 } else if ((unread == 0) && (newptr == oldptr)) { 3441 /* Nothing to do - we were just polling */ 3442 return (-1); 3443 } else if (oldptr + (unread * sizeof (lom_event_t)) == newptr) { 3444 /* Ok - got as many events as we expected */ 3445 count = unread; 3446 } else if (oldptr + (unread * sizeof (lom_event_t)) > newptr) { 3447 /* 3448 * Errrm more messages than there should have been. 3449 * Possible causes: 3450 * 1. the event log has filled - we have been 3451 * away for a long time 3452 * 2. software bug in lom or driver. 3453 * 3. something that I haven't thought of! 3454 * Always warn about this we should really never 3455 * see it! 3456 */ 3457 count = (newptr - oldptr) / sizeof (lom_event_t); 3458 BSCV_TRACE(ssp, 'E', "bscv_event_process", 3459 "bscv_event_process: lom reported " 3460 "more events (%d) than expected (%d).", 3461 unread, count); 3462 cmn_err(CE_CONT, "only processing %d events", count); 3463 } else { 3464 /* Less messages - perhaps the lom has been reset */ 3465 count = (newptr - oldptr) / sizeof (lom_event_t); 3466 BSCV_TRACE(ssp, 'E', "bscv_event_process", 3467 "lom reported less events (%d) than expected (%d)" 3468 " - the lom may have been reset", 3469 unread, count); 3470 } 3471 /* Whatever happens only read a maximum of 255 entries */ 3472 if ((count >= 0xff)) { 3473 cmn_err(CE_WARN, 3474 "bscv_event_process: too many events (%d) to " 3475 "process - some may have been lost", count); 3476 count = 0xff; 3477 } 3478 return (count); 3479 } 3480 3481 /* 3482 * function - bscv_event_process_one 3483 * description - reports on state changes to the host. 3484 * 3485 * inputs - LOM soft state structure pointer. 3486 * 3487 * outputs - none. 3488 */ 3489 3490 static void 3491 bscv_event_process_one(bscv_soft_state_t *ssp, lom_event_t *event) 3492 { 3493 int level; 3494 char eventstr[100]; 3495 int msg_type = 0; 3496 3497 if (bscv_is_null_event(ssp, event)) { 3498 /* Cleared entry - do not report it */ 3499 return; 3500 } 3501 3502 level = bscv_level_of_event(event); 3503 3504 switch (level) { 3505 default: 3506 msg_type = CE_NOTE; 3507 break; 3508 3509 case EVENT_LEVEL_FATAL: 3510 case EVENT_LEVEL_FAULT: 3511 msg_type = CE_WARN; 3512 break; 3513 } 3514 3515 bscv_build_eventstring(ssp, event, eventstr, eventstr + 3516 sizeof (eventstr)); 3517 3518 if (level <= ssp->reporting_level) { 3519 /* 3520 * The message is important enough to be shown on the console 3521 * as well as the log. 3522 */ 3523 cmn_err(msg_type, "%s", eventstr); 3524 } else { 3525 /* 3526 * The message goes only to the log. 3527 */ 3528 cmn_err(msg_type, "!%s", eventstr); 3529 } 3530 } 3531 3532 /* 3533 * time formats 3534 * 3535 * The BSC represents times as seconds since epoch 1970. Currently it gives 3536 * us 32 bits, unsigned. In the future this might change to a 64-bit count, 3537 * to allow a greater range. 3538 * 3539 * Timestamp values below BSC_TIME_SANITY do not represent an absolute time, 3540 * but instead represent an offset from the last reset. This must be 3541 * borne in mind by output routines. 3542 */ 3543 3544 typedef uint32_t bsctime_t; 3545 3546 #define BSC_TIME_SANITY 1000000000 3547 3548 /* 3549 * render a formatted time for display 3550 */ 3551 3552 static size_t 3553 bscv_event_snprintgmttime(char *buf, size_t bufsz, todinfo_t t) 3554 { 3555 int year; 3556 3557 /* tod_year is base 1900 so this code needs to adjust */ 3558 year = 1900 + t.tod_year; 3559 3560 return (snprintf(buf, bufsz, "%04d-%02d-%02d %02d:%02d:%02dZ", 3561 year, t.tod_month, t.tod_day, t.tod_hour, 3562 t.tod_min, t.tod_sec)); 3563 } 3564 3565 /* 3566 * function - bscv_build_eventstring 3567 * description - reports on state changes to the host. 3568 * 3569 * inputs - LOM soft state structure pointer. 3570 * 3571 * outputs - none. 3572 */ 3573 3574 static void 3575 bscv_build_eventstring(bscv_soft_state_t *ssp, lom_event_t *event, 3576 char *buf, char *bufend) 3577 { 3578 uint8_t subsystem; 3579 uint8_t eventtype; 3580 bsctime_t bsctm; 3581 3582 BSCV_TRACE(ssp, 'S', "bscv_build_eventstring", "event %2x%2x%2x%2x", 3583 event->ev_subsys, event->ev_event, 3584 event->ev_resource, event->ev_detail); 3585 BSCV_TRACE(ssp, 'S', "bscv_build_eventstring", "time %2x%2x%2x%2x", 3586 event->ev_data[0], event->ev_data[1], 3587 event->ev_data[2], event->ev_data[3]); 3588 3589 /* 3590 * We accept bad subsystems and event type codes here. 3591 * The code decodes as much as possible and then produces 3592 * suitable output. 3593 */ 3594 subsystem = EVENT_DECODE_SUBSYS(event->ev_subsys); 3595 eventtype = event->ev_event; 3596 3597 /* time */ 3598 bsctm = (((uint32_t)event->ev_data[0]) << 24) | 3599 (((uint32_t)event->ev_data[1]) << 16) | 3600 (((uint32_t)event->ev_data[2]) << 8) | 3601 ((uint32_t)event->ev_data[3]); 3602 if (bsctm < BSC_TIME_SANITY) { 3603 /* offset */ 3604 buf += snprintf(buf, bufend-buf, "+P%dd%02dh%02dm%02ds", 3605 (int)(bsctm/86400), (int)(bsctm/3600%24), 3606 (int)(bsctm/60%60), (int)(bsctm%60)); 3607 } else { 3608 /* absolute time */ 3609 mutex_enter(&tod_lock); 3610 buf += bscv_event_snprintgmttime(buf, bufend-buf, 3611 utc_to_tod(bsctm)); 3612 mutex_exit(&tod_lock); 3613 } 3614 buf += snprintf(buf, bufend-buf, " "); 3615 3616 /* subsysp */ 3617 if (subsystem < 3618 (sizeof (eventSubsysStrings)/sizeof (*eventSubsysStrings))) { 3619 buf += snprintf(buf, bufend - buf, "%s", 3620 eventSubsysStrings[subsystem]); 3621 } else { 3622 buf += snprintf(buf, bufend - buf, 3623 "unknown subsystem %d ", subsystem); 3624 } 3625 3626 /* resource */ 3627 switch (subsystem) { 3628 case EVENT_SUBSYS_ALARM: 3629 case EVENT_SUBSYS_TEMP: 3630 case EVENT_SUBSYS_OVERTEMP: 3631 case EVENT_SUBSYS_FAN: 3632 case EVENT_SUBSYS_SUPPLY: 3633 case EVENT_SUBSYS_BREAKER: 3634 case EVENT_SUBSYS_PSU: 3635 buf += snprintf(buf, bufend - buf, "%d ", event->ev_resource); 3636 break; 3637 case EVENT_SUBSYS_LED: 3638 buf += snprintf(buf, bufend - buf, "%s ", bscv_get_label( 3639 ssp->led_names, MAX_LED_ID, event->ev_resource - 1)); 3640 break; 3641 default: 3642 break; 3643 } 3644 3645 /* fatal */ 3646 if (event->ev_subsys & EVENT_MASK_FAULT) { 3647 if (event->ev_subsys & EVENT_MASK_FATAL) { 3648 buf += snprintf(buf, bufend - buf, "FATAL FAULT: "); 3649 } else { 3650 buf += snprintf(buf, bufend - buf, "FAULT: "); 3651 } 3652 } 3653 3654 /* eventp */ 3655 if (eventtype < 3656 (sizeof (eventTypeStrings)/sizeof (*eventTypeStrings))) { 3657 buf += snprintf(buf, bufend - buf, "%s", 3658 eventTypeStrings[eventtype]); 3659 } else { 3660 buf += snprintf(buf, bufend - buf, 3661 "unknown event 0x%02x%02x%02x%02x", 3662 event->ev_subsys, event->ev_event, 3663 event->ev_resource, event->ev_detail); 3664 } 3665 3666 /* detail */ 3667 switch (subsystem) { 3668 case EVENT_SUBSYS_TEMP: 3669 if ((eventtype != EVENT_RECOVERED) && 3670 eventtype != EVENT_DEVICE_INACCESSIBLE) { 3671 buf += snprintf(buf, bufend - buf, " - %d degC", 3672 (int8_t)event->ev_detail); 3673 } 3674 break; 3675 case EVENT_SUBSYS_FAN: 3676 if (eventtype == EVENT_FAILED) { 3677 buf += snprintf(buf, bufend - buf, 3678 " %d%%", event->ev_detail); 3679 } 3680 break; 3681 case EVENT_SUBSYS_LOM: 3682 switch (eventtype) { 3683 case EVENT_FLASH_DOWNLOAD: 3684 buf += snprintf(buf, bufend - buf, 3685 ": v%d.%d to v%d.%d", 3686 (event->ev_resource >> 4), 3687 (event->ev_resource & 0x0f), 3688 (event->ev_detail >> 4), 3689 (event->ev_detail & 0x0f)); 3690 break; 3691 case EVENT_WATCHDOG_TRIGGER: 3692 buf += snprintf(buf, bufend - buf, 3693 event->ev_detail ? "- soft" : " - hard"); 3694 break; 3695 case EVENT_UNEXPECTED_RESET: 3696 if (event->ev_detail & 3697 LOM_UNEXPECTEDRESET_MASK_BADTRAP) { 3698 buf += snprintf(buf, bufend - buf, 3699 " - unclaimed exception 0x%x", 3700 event->ev_detail & 3701 ~LOM_UNEXPECTEDRESET_MASK_BADTRAP); 3702 } 3703 break; 3704 case EVENT_RESET: 3705 switch (event->ev_detail) { 3706 case LOM_RESET_DETAIL_BYUSER: 3707 buf += snprintf(buf, bufend - buf, " by user"); 3708 break; 3709 case LOM_RESET_DETAIL_REPROGRAMMING: 3710 buf += snprintf(buf, bufend - buf, 3711 " after flash download"); 3712 break; 3713 default: 3714 buf += snprintf(buf, bufend - buf, 3715 " - unknown reason"); 3716 break; 3717 } 3718 break; 3719 default: 3720 break; 3721 } 3722 break; 3723 case EVENT_SUBSYS_LED: 3724 switch (event->ev_detail) { 3725 case LOM_LED_STATE_OFF: 3726 buf += snprintf(buf, bufend - buf, ": OFF"); 3727 break; 3728 case LOM_LED_STATE_ON_STEADY: 3729 buf += snprintf(buf, bufend - buf, ": ON"); 3730 break; 3731 case LOM_LED_STATE_ON_FLASHING: 3732 case LOM_LED_STATE_ON_SLOWFLASH: 3733 buf += snprintf(buf, bufend - buf, ": BLINKING"); 3734 break; 3735 case LOM_LED_STATE_INACCESSIBLE: 3736 buf += snprintf(buf, bufend - buf, ": inaccessible"); 3737 break; 3738 case LOM_LED_STATE_STANDBY: 3739 buf += snprintf(buf, bufend - buf, ": standby"); 3740 break; 3741 case LOM_LED_STATE_NOT_PRESENT: 3742 buf += snprintf(buf, bufend - buf, ": not present"); 3743 break; 3744 default: 3745 buf += snprintf(buf, bufend - buf, ": 0x%x", 3746 event->ev_resource); 3747 break; 3748 } 3749 break; 3750 case EVENT_SUBSYS_USER: 3751 switch (eventtype) { 3752 case EVENT_USER_ADDED: 3753 case EVENT_USER_REMOVED: 3754 case EVENT_USER_PERMSCHANGED: 3755 case EVENT_USER_LOGIN: 3756 case EVENT_USER_PASSWORD_CHANGE: 3757 case EVENT_USER_LOGINFAIL: 3758 case EVENT_USER_LOGOUT: 3759 buf += snprintf(buf, bufend - buf, " %d", 3760 event->ev_resource); 3761 default: 3762 break; 3763 } 3764 break; 3765 case EVENT_SUBSYS_PSU: 3766 if (event->ev_detail & LOM_PSU_NOACCESS) { 3767 buf += snprintf(buf, bufend - buf, " - inaccessible"); 3768 } else if ((event->ev_detail & LOM_PSU_STATUS_MASK) 3769 == LOM_PSU_STATUS_MASK) { 3770 buf += snprintf(buf, bufend - buf, " - OK"); 3771 } else { 3772 buf += snprintf(buf, bufend - buf, " -"); 3773 /* 3774 * If both inputs are seen to have failed then simply 3775 * indicate that the PSU input has failed 3776 */ 3777 if (!(event->ev_detail & 3778 (LOM_PSU_INPUT_A_OK | LOM_PSU_INPUT_B_OK))) { 3779 buf += snprintf(buf, bufend - buf, " Input"); 3780 } else { 3781 /* At least one input is ok */ 3782 if (!(event->ev_detail & LOM_PSU_INPUT_A_OK)) { 3783 buf += snprintf(buf, bufend - buf, 3784 " InA"); 3785 } 3786 if (!(event->ev_detail & LOM_PSU_INPUT_B_OK)) { 3787 buf += snprintf(buf, bufend - buf, 3788 " InB"); 3789 } 3790 /* 3791 * Only flag an output error if an input is 3792 * still present 3793 */ 3794 if (!(event->ev_detail & LOM_PSU_OUTPUT_OK)) { 3795 buf += snprintf(buf, bufend - buf, 3796 " Output"); 3797 } 3798 } 3799 buf += snprintf(buf, bufend - buf, " failed"); 3800 } 3801 break; 3802 case EVENT_SUBSYS_NONE: 3803 if (eventtype == EVENT_FAULT_LED) { 3804 switch (event->ev_detail) { 3805 case 0: 3806 buf += snprintf(buf, bufend - buf, " - ON"); 3807 break; 3808 case 255: 3809 buf += snprintf(buf, bufend - buf, " - OFF"); 3810 break; 3811 default: 3812 buf += snprintf(buf, bufend - buf, 3813 " - %dHz", event->ev_detail); 3814 break; 3815 } 3816 } 3817 break; 3818 case EVENT_SUBSYS_HOST: 3819 if (eventtype == EVENT_BOOTMODE_CHANGE) { 3820 switch (event->ev_detail & 3821 ~EBUS_BOOTMODE_FORCE_CONSOLE) { 3822 case EBUS_BOOTMODE_FORCE_NOBOOT: 3823 buf += snprintf(buf, bufend - buf, 3824 " - no boot"); 3825 break; 3826 case EBUS_BOOTMODE_RESET_DEFAULT: 3827 buf += snprintf(buf, bufend - buf, 3828 " - reset defaults"); 3829 break; 3830 case EBUS_BOOTMODE_FULLDIAG: 3831 buf += snprintf(buf, bufend - buf, 3832 " - full diag"); 3833 break; 3834 case EBUS_BOOTMODE_SKIPDIAG: 3835 buf += snprintf(buf, bufend - buf, 3836 " - skip diag"); 3837 break; 3838 default: 3839 break; 3840 } 3841 } 3842 if (eventtype == EVENT_SCC_STATUS) { 3843 switch (event->ev_detail) { 3844 case 0: 3845 buf += snprintf(buf, bufend - buf, 3846 " - inserted"); 3847 break; 3848 case 1: 3849 buf += snprintf(buf, bufend - buf, 3850 " - removed"); 3851 break; 3852 default: 3853 break; 3854 } 3855 } 3856 break; 3857 3858 default: 3859 break; 3860 } 3861 3862 /* shutd */ 3863 if (event->ev_subsys & EVENT_MASK_SHUTDOWN_REQD) { 3864 buf += snprintf(buf, bufend - buf, " - shutdown req'd"); 3865 } 3866 3867 buf += snprintf(buf, bufend - buf, "\n"); 3868 3869 if (buf >= bufend) { 3870 /* Ensure newline at end of string */ 3871 bufend[-2] = '\n'; 3872 bufend[-1] = '\0'; 3873 #ifdef DEBUG 3874 cmn_err(CE_WARN, "!bscv_build_eventstring: buffer too small!"); 3875 #endif /* DEBUG */ 3876 } 3877 } 3878 3879 /* 3880 * function - bscv_level_of_event 3881 * description - This routine determines which level an event should be 3882 * reported at. 3883 * inputs - lom event structure pointer 3884 * outputs - event level. 3885 */ 3886 static int 3887 bscv_level_of_event(lom_event_t *event) 3888 { 3889 int level; 3890 /* 3891 * This is the same criteria that the firmware uses except we 3892 * log the fault led on as being EVENT_LEVEL_FAULT 3893 */ 3894 if (EVENT_DECODE_SUBSYS(event->ev_subsys) == EVENT_SUBSYS_USER) { 3895 level = EVENT_LEVEL_USER; 3896 } else if ((EVENT_DECODE_SUBSYS(event->ev_subsys) == 3897 EVENT_SUBSYS_ALARM) && (event->ev_event == EVENT_STATE_ON)) { 3898 level = EVENT_LEVEL_FAULT; 3899 } else if ((EVENT_DECODE_SUBSYS(event->ev_subsys) == 3900 EVENT_SUBSYS_NONE) && 3901 (event->ev_event == EVENT_FAULT_LED) && 3902 (event->ev_detail != 0xff)) { 3903 level = EVENT_LEVEL_FAULT; 3904 } else if ((EVENT_DECODE_SUBSYS(event->ev_subsys) == 3905 EVENT_SUBSYS_LOM) && event->ev_event == EVENT_TIME_REFERENCE) { 3906 level = EVENT_LEVEL_NOTICE; 3907 } else if (event->ev_event == EVENT_RECOVERED) { 3908 /* 3909 * All recovery messages need to be reported to the console 3910 * because during boot, the faults which occurred whilst 3911 * Solaris was not running are relayed to the console. There 3912 * is a case whereby a fatal fault (eg. over temp) could 3913 * have occurred and then recovered. The recovery condition 3914 * needs to be reported so the user doesn't think that the 3915 * failure (over temp) is still present. 3916 */ 3917 level = EVENT_LEVEL_FAULT; 3918 } else if (EVENT_DECODE_FAULT(event->ev_subsys) == 0) { 3919 /* None of FAULT, FATAL or SHUTDOWN REQD are set */ 3920 level = EVENT_LEVEL_NOTICE; 3921 } else if (EVENT_DECODE_FAULT(event->ev_subsys) == EVENT_MASK_FAULT) { 3922 /* Only FAULT set i.e not FATAL or SHUTDOWN REQD */ 3923 level = EVENT_LEVEL_FAULT; 3924 } else { 3925 level = EVENT_LEVEL_FATAL; 3926 } 3927 3928 return (level); 3929 } 3930 3931 /* 3932 * function - bscv_status 3933 * description - This routine is called when any change in the LOMlite2 status 3934 * is indicated by the status registers. 3935 * 3936 * inputs - LOM soft state structure pointer 3937 * 3938 * outputs - none. 3939 */ 3940 static void 3941 bscv_status(bscv_soft_state_t *ssp, uint8_t state_chng, uint8_t dev_no) 3942 { 3943 int8_t temp; 3944 uint8_t fanspeed; 3945 3946 ASSERT(bscv_held(ssp)); 3947 3948 BSCV_TRACE(ssp, 'D', "bscv_status", "state_chng 0x%x dev_no 0x%x", 3949 state_chng, dev_no); 3950 3951 /* 3952 * The device that has changed is given by the state change 3953 * register and the event detail register so react 3954 * accordingly. 3955 */ 3956 3957 if (state_chng == EBUS_STATE_NOTIFY) { 3958 /* 3959 * The BSC is indicating a self state change 3960 */ 3961 if (dev_no == EBUS_DETAIL_FLASH) { 3962 ssp->cssp_prog = B_TRUE; 3963 BSCV_TRACE(ssp, 'D', "bscv_status", 3964 "ssp->cssp_prog changed to 0x%x", 3965 ssp->cssp_prog); 3966 /* 3967 * It takes the BSC at least 100 ms to 3968 * clear down the comms protocol. 3969 * We back-off from talking to the 3970 * BSC during this period. 3971 */ 3972 delay(BSC_EVENT_POLL_NORMAL); 3973 BSCV_TRACE(ssp, 'D', "bscv_status", 3974 "completed delay"); 3975 } else if (dev_no == EBUS_DETAIL_RESET) { 3976 /* 3977 * The bsc has reset 3978 */ 3979 BSCV_TRACE(ssp, 'D', "bscv_status", 3980 "BSC reset occured, re-synching"); 3981 (void) bscv_attach_common(ssp); 3982 BSCV_TRACE(ssp, 'D', "bscv_status", 3983 "completed attach_common"); 3984 } 3985 3986 } 3987 3988 if ((state_chng & EBUS_STATE_FAN) && ((dev_no - 1) < MAX_FANS)) { 3989 fanspeed = bscv_get8(ssp, chan_general, 3990 EBUS_IDX_FAN1_SPEED + dev_no - 1); 3991 /* 3992 * Only remember fanspeeds which are real values or 3993 * NOT PRESENT values. 3994 */ 3995 if ((fanspeed <= LOM_FAN_MAX_SPEED) || 3996 (fanspeed == LOM_FAN_NOT_PRESENT)) { 3997 ssp->fanspeed[dev_no - 1] = fanspeed; 3998 } 3999 } 4000 4001 if ((state_chng & EBUS_STATE_PSU) && ((dev_no - 1) < MAX_PSUS)) { 4002 (void) bscv_get8(ssp, chan_general, 4003 EBUS_IDX_PSU1_STAT + dev_no - 1); 4004 } 4005 4006 if (state_chng & EBUS_STATE_GP) { 4007 (void) bscv_get8(ssp, chan_general, EBUS_IDX_GPIP); 4008 } 4009 4010 if (state_chng & EBUS_STATE_CB) { 4011 (void) bscv_get8(ssp, chan_general, EBUS_IDX_CBREAK_STATUS); 4012 } 4013 4014 if ((state_chng & EBUS_STATE_TEMPERATURE) && 4015 ((dev_no - 1) < MAX_TEMPS)) { 4016 temp = bscv_get8(ssp, chan_general, 4017 EBUS_IDX_TEMP1 + dev_no - 1); 4018 /* 4019 * Only remember temperatures which are real values or 4020 * a NOT PRESENT value. 4021 */ 4022 if ((temp <= LOM_TEMP_MAX_VALUE) || 4023 (temp == LOM_TEMP_STATE_NOT_PRESENT)) { 4024 ssp->temps.temp[dev_no - 1] = temp; 4025 } 4026 } 4027 4028 if (state_chng & EBUS_STATE_RAIL) { 4029 (void) bscv_get8(ssp, chan_general, EBUS_IDX_SUPPLY_LO); 4030 (void) bscv_get8(ssp, chan_general, EBUS_IDX_SUPPLY_HI); 4031 } 4032 } 4033 4034 char * 4035 bscv_get_label(char labels[][MAX_LOM2_NAME_STR], int limit, int index) 4036 { 4037 4038 if (labels == NULL) 4039 return (""); 4040 4041 if (limit < 0 || index < 0 || index > limit) 4042 return ("-"); 4043 4044 return (labels[index]); 4045 } 4046 4047 static void 4048 bscv_generic_sysevent(bscv_soft_state_t *ssp, char *class, char *subclass, 4049 char *fru_id, char *res_id, int32_t fru_state, char *msg) 4050 { 4051 int rv; 4052 nvlist_t *attr_list; 4053 4054 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", "%s/%s:(%s,%s,%d) %s", 4055 class, subclass, fru_id, res_id, fru_state, msg); 4056 4057 4058 if (nvlist_alloc(&attr_list, NV_UNIQUE_NAME_TYPE, KM_SLEEP)) { 4059 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4060 "nvlist alloc failure"); 4061 return; 4062 } 4063 if (nvlist_add_uint32(attr_list, ENV_VERSION, 1)) { 4064 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4065 "nvlist ENV_VERSION failure"); 4066 nvlist_free(attr_list); 4067 return; 4068 } 4069 if (nvlist_add_string(attr_list, ENV_FRU_ID, fru_id)) { 4070 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4071 "nvlist ENV_FRU_ID failure"); 4072 nvlist_free(attr_list); 4073 return; 4074 } 4075 if (nvlist_add_string(attr_list, ENV_FRU_RESOURCE_ID, res_id)) { 4076 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4077 "nvlist ENV_FRU_RESOURCE_ID failure"); 4078 nvlist_free(attr_list); 4079 return; 4080 } 4081 if (nvlist_add_string(attr_list, ENV_FRU_DEVICE, ENV_RESERVED_ATTR)) { 4082 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4083 "nvlist ENV_FRU_DEVICE failure"); 4084 nvlist_free(attr_list); 4085 return; 4086 } 4087 if (nvlist_add_int32(attr_list, ENV_FRU_STATE, fru_state)) { 4088 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4089 "nvlist ENV_FRU_STATE failure"); 4090 nvlist_free(attr_list); 4091 return; 4092 } 4093 if (nvlist_add_string(attr_list, ENV_MSG, msg)) { 4094 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", 4095 "nvlist ENV_MSG failure"); 4096 nvlist_free(attr_list); 4097 return; 4098 } 4099 4100 rv = ddi_log_sysevent(ssp->dip, DDI_VENDOR_SUNW, class, 4101 subclass, attr_list, NULL, DDI_SLEEP); 4102 4103 if (rv == DDI_SUCCESS) { 4104 BSCV_TRACE(ssp, 'E', "bscv_generic_sysevent", "sent sysevent"); 4105 } else { 4106 cmn_err(CE_WARN, "!cannot deliver sysevent"); 4107 } 4108 4109 nvlist_free(attr_list); 4110 } 4111 4112 /* 4113 * function - bscv_sysevent 4114 * description - send out a sysevent on the given change if needed 4115 * inputs - soft state pointer, event to report 4116 * outputs - none 4117 */ 4118 4119 static void 4120 bscv_sysevent(bscv_soft_state_t *ssp, lom_event_t *event) 4121 { 4122 char *class = NULL; 4123 char *subclass = NULL; 4124 char *fru_id = "Blade"; /* The blade is only one FRU */ 4125 char *res_id; 4126 int32_t fru_state = 0; 4127 4128 BSCV_TRACE(ssp, 'E', "bscv_sysevent", "processing event"); 4129 4130 ASSERT(event != NULL); 4131 4132 /* Map ev_subsys to sysevent class/sub-class */ 4133 4134 switch (EVENT_DECODE_SUBSYS(event->ev_subsys)) { 4135 case EVENT_SUBSYS_NONE: 4136 break; 4137 case EVENT_SUBSYS_ALARM: 4138 break; 4139 case EVENT_SUBSYS_TEMP: 4140 class = EC_ENV, subclass = ESC_ENV_TEMP; 4141 res_id = bscv_get_label(ssp->temps.name, ssp->temps.num, 4142 event->ev_resource - 1); 4143 switch (event->ev_event) { 4144 case EVENT_SEVERE_OVERHEAT: 4145 fru_state = ENV_FAILED; 4146 break; 4147 case EVENT_OVERHEAT: 4148 fru_state = ENV_WARNING; 4149 break; 4150 case EVENT_NO_OVERHEAT: 4151 fru_state = ENV_OK; 4152 break; 4153 default: 4154 return; 4155 } 4156 break; 4157 case EVENT_SUBSYS_OVERTEMP: 4158 break; 4159 case EVENT_SUBSYS_FAN: 4160 class = EC_ENV, subclass = ESC_ENV_FAN; 4161 res_id = bscv_get_label(ssp->fan_names, ssp->num_fans, 4162 event->ev_resource - 1); 4163 switch (event->ev_event) { 4164 case EVENT_FAILED: 4165 fru_state = ENV_FAILED; 4166 break; 4167 case EVENT_RECOVERED: 4168 fru_state = ENV_OK; 4169 break; 4170 default: 4171 return; 4172 } 4173 break; 4174 case EVENT_SUBSYS_SUPPLY: 4175 class = EC_ENV, subclass = ESC_ENV_POWER; 4176 res_id = bscv_get_label(ssp->sflags.name, ssp->sflags.num, 4177 event->ev_resource - 1); 4178 switch (event->ev_event) { 4179 case EVENT_FAILED: 4180 fru_state = ENV_FAILED; 4181 break; 4182 case EVENT_RECOVERED: 4183 fru_state = ENV_OK; 4184 break; 4185 default: 4186 return; 4187 } 4188 break; 4189 case EVENT_SUBSYS_BREAKER: 4190 break; 4191 case EVENT_SUBSYS_PSU: 4192 break; 4193 case EVENT_SUBSYS_USER: 4194 break; 4195 case EVENT_SUBSYS_PHONEHOME: 4196 break; 4197 case EVENT_SUBSYS_LOM: 4198 break; 4199 case EVENT_SUBSYS_HOST: 4200 break; 4201 case EVENT_SUBSYS_EVENTLOG: 4202 break; 4203 case EVENT_SUBSYS_EXTRA: 4204 break; 4205 case EVENT_SUBSYS_LED: 4206 if (event->ev_event != EVENT_FAULT_LED && 4207 event->ev_event != EVENT_STATE_CHANGE) 4208 return; 4209 /* 4210 * There are 3 LEDs : Power, Service, Ready-to-Remove on a 4211 * JBOS blade. We'll never report the Power since Solaris 4212 * won't be running when it is _switched_ ON. Ready-to-Remove 4213 * will only be lit when we're powered down which also means 4214 * Solaris won't be running. We don't want to report it 4215 * during system testing / Sun VTS exercising the LEDs. 4216 * 4217 * Therefore, we only report the Service Required LED. 4218 */ 4219 class = EC_ENV, subclass = ESC_ENV_LED; 4220 res_id = bscv_get_label(ssp->led_names, MAX_LED_ID, 4221 event->ev_resource - 1); 4222 4223 switch (event->ev_detail) { 4224 case LOM_LED_STATE_ON_STEADY: 4225 fru_state = ENV_LED_ON; 4226 break; 4227 case LOM_LED_STATE_ON_FLASHING: 4228 case LOM_LED_STATE_ON_SLOWFLASH: 4229 fru_state = ENV_LED_BLINKING; 4230 break; 4231 case LOM_LED_STATE_OFF: 4232 fru_state = ENV_LED_OFF; 4233 break; 4234 case LOM_LED_STATE_INACCESSIBLE: 4235 fru_state = ENV_LED_INACCESSIBLE; 4236 break; 4237 case LOM_LED_STATE_STANDBY: 4238 fru_state = ENV_LED_STANDBY; 4239 break; 4240 case LOM_LED_STATE_NOT_PRESENT: 4241 fru_state = ENV_LED_NOT_PRESENT; 4242 break; 4243 default: 4244 fru_state = ENV_LED_INACCESSIBLE; 4245 break; 4246 } 4247 break; 4248 default : 4249 break; 4250 } 4251 4252 if (class == NULL || subclass == NULL) { 4253 BSCV_TRACE(ssp, 'E', "bscv_sysevent", "class/subclass NULL"); 4254 return; 4255 } 4256 4257 bscv_generic_sysevent(ssp, class, subclass, fru_id, res_id, fru_state, 4258 ENV_RESERVED_ATTR); 4259 } 4260 4261 /* 4262 * ********************************************************************* 4263 * Firmware download (programming) 4264 * ********************************************************************* 4265 */ 4266 4267 /* 4268 * function - bscv_prog 4269 * description - LOMlite2 flash programming code. 4270 * 4271 * bscv_prog_image - download a complete image to the lom. 4272 * bscv_prog_receive_image - receive data to build up a 4273 * complete image. 4274 * bscv_prog_stop_lom - pause the event daemon and prepare 4275 * lom for firmware upgrade. 4276 * bscv_prog_start_lom - reinit the driver/lom after upgrade 4277 * and restart the event daemon 4278 * 4279 * inputs - soft state pointer, arg ptr, ioctl mode 4280 * outputs - status 4281 */ 4282 4283 static int 4284 bscv_prog(bscv_soft_state_t *ssp, intptr_t arg, int mode) 4285 { 4286 lom_prog_t *prog; 4287 int res = 0; 4288 4289 /* 4290 * We will get repeatedly called with bits of data first for 4291 * loader, then for main image. 4292 */ 4293 prog = (lom_prog_t *)kmem_alloc(sizeof (lom_prog_t), KM_SLEEP); 4294 4295 if (ddi_copyin((caddr_t)arg, (caddr_t)prog, sizeof (*prog), 4296 mode) < 0) { 4297 kmem_free((void *)prog, sizeof (*prog)); 4298 return (EFAULT); 4299 } 4300 4301 BSCV_TRACE(ssp, 'U', "bscv_prog", 4302 "index 0x%x size 0x%x", prog->index, prog->size); 4303 4304 mutex_enter(&ssp->prog_mu); 4305 if (prog->size == 0) { 4306 if (prog->index == 2) { 4307 /* 4308 * This is the initial request for the chip type so we 4309 * know what we are programming. 4310 * The type will have been read in at init so just 4311 * return it in data[0]. 4312 */ 4313 prog->data[0] = bscv_get8_cached(ssp, 4314 EBUS_IDX_CPU_IDENT); 4315 4316 if (ddi_copyout((caddr_t)prog, (caddr_t)arg, 4317 sizeof (lom_prog_t), mode) < 0) { 4318 res = EFAULT; 4319 } 4320 } else if (prog->index == 0) { 4321 res = bscv_prog_stop_lom(ssp); 4322 } else if (prog->index == 1) { 4323 res = bscv_prog_start_lom(ssp); 4324 } else { 4325 res = EINVAL; 4326 } 4327 } else { 4328 if (ssp->image == NULL) { 4329 ssp->image = (uint8_t *)kmem_zalloc( 4330 BSC_IMAGE_MAX_SIZE, KM_SLEEP); 4331 } 4332 res = bscv_prog_receive_image(ssp, prog, 4333 ssp->image, BSC_IMAGE_MAX_SIZE); 4334 } 4335 mutex_exit(&ssp->prog_mu); 4336 kmem_free((void *)prog, sizeof (lom_prog_t)); 4337 4338 return (res); 4339 } 4340 4341 static int 4342 bscv_check_loader_config(bscv_soft_state_t *ssp, boolean_t is_image2) 4343 { 4344 BSCV_TRACE(ssp, 'U', "bscv_check_loader_config", 4345 "loader_running %d, is_image2 %d", 4346 ssp->loader_running, is_image2); 4347 4348 /* 4349 * loader_running TRUE means that we have told the microcontroller to 4350 * JUMP into the loader code which has been downloaded into its RAM. 4351 * At this point its an error to try and download another loader. We 4352 * should be downloading the actual image at this point. 4353 * Conversely, it is an error to download an image when the loader is 4354 * not already downloaded and the microcontroller hasn't JUMPed into it. 4355 * is_image2 TRUE means the image is being downloaded. 4356 * is_image2 FALSE means the loader is being downloaded. 4357 */ 4358 if (ssp->loader_running && !is_image2) { 4359 cmn_err(CE_WARN, "Attempt to download loader image " 4360 "with loader image already active"); 4361 cmn_err(CE_CONT, "This maybe an attempt to restart a " 4362 "failed firmware download - ignoring download attempt"); 4363 return (B_FALSE); 4364 } else if (!ssp->loader_running && is_image2) { 4365 cmn_err(CE_WARN, "Attempt to download firmware image " 4366 "without loader image active"); 4367 return (B_FALSE); 4368 4369 } 4370 4371 return (B_TRUE); 4372 } 4373 4374 static uint32_t 4375 bscv_get_pagesize(bscv_soft_state_t *ssp) 4376 { 4377 uint32_t pagesize; 4378 4379 ASSERT(bscv_held(ssp)); 4380 4381 pagesize = bscv_get32(ssp, chan_prog, 4382 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PAGE0)); 4383 4384 BSCV_TRACE(ssp, 'U', "bscv_get_pagesize", "pagesize 0x%x", pagesize); 4385 4386 return (pagesize); 4387 } 4388 4389 /* 4390 * Sets the pagesize, returning the old value. 4391 */ 4392 static uint32_t 4393 bscv_set_pagesize(bscv_soft_state_t *ssp, uint32_t pagesize) 4394 { 4395 uint32_t old_pagesize; 4396 4397 ASSERT(bscv_held(ssp)); 4398 4399 old_pagesize = bscv_get_pagesize(ssp); 4400 4401 /* 4402 * The microcontroller remembers this value until until someone 4403 * changes it. 4404 */ 4405 bscv_put32(ssp, chan_prog, 4406 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PSIZ0), pagesize); 4407 4408 return (old_pagesize); 4409 } 4410 4411 static uint8_t 4412 bscv_enter_programming_mode(bscv_soft_state_t *ssp) 4413 { 4414 uint8_t retval; 4415 4416 ASSERT(bscv_held(ssp)); 4417 4418 bscv_put8(ssp, chan_prog, 4419 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), 4420 EBUS_PROGRAM_PCR_PRGMODE_ON); 4421 4422 retval = bscv_get8(ssp, chan_prog, BSCVA(EBUS_CMD_SPACE_PROGRAM, 4423 EBUS_PROGRAM_PCSR)); 4424 4425 return (retval); 4426 } 4427 4428 static void 4429 bscv_leave_programming_mode(bscv_soft_state_t *ssp, boolean_t with_jmp) 4430 { 4431 uint8_t reg; 4432 ASSERT(bscv_held(ssp)); 4433 4434 if (with_jmp) { 4435 reg = EBUS_PROGRAM_PCR_PROGOFF_JUMPTOADDR; 4436 BSCV_TRACE(ssp, 'U', "bscv_leave_programming_mode", 4437 "jumptoaddr"); 4438 } else { 4439 reg = EBUS_PROGRAM_PCR_PRGMODE_OFF; 4440 BSCV_TRACE(ssp, 'U', "bscv_leave_programming_mode", 4441 "prgmode_off"); 4442 } 4443 4444 bscv_put8(ssp, chan_prog, 4445 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), reg); 4446 } 4447 4448 4449 static void 4450 bscv_set_jump_to_addr(bscv_soft_state_t *ssp, uint32_t loadaddr) 4451 { 4452 ASSERT(bscv_held(ssp)); 4453 4454 bscv_put32(ssp, chan_prog, 4455 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PADR0), loadaddr); 4456 4457 BSCV_TRACE(ssp, 'U', "bscv_set_jump_to_addr", 4458 "set jump to loadaddr 0x%x", loadaddr); 4459 } 4460 4461 static uint8_t 4462 bscv_erase_once(bscv_soft_state_t *ssp, uint32_t loadaddr, uint32_t image_size) 4463 { 4464 uint8_t retval; 4465 4466 ASSERT(bscv_held(ssp)); 4467 4468 /* 4469 * write PADR, PSIZ to define area to be erased 4470 * We do not send erase for zero size because the current 4471 * downloader gets this wrong 4472 */ 4473 4474 /* 4475 * start at 0 4476 */ 4477 BSCV_TRACE(ssp, 'U', "bscv_erase_once", "sending erase command"); 4478 4479 bscv_put32(ssp, chan_prog, 4480 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PADR0), 4481 loadaddr); 4482 4483 /* set PSIZ to full size of image to be programmed */ 4484 bscv_put32(ssp, chan_prog, 4485 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PSIZ0), 4486 image_size); 4487 4488 /* write ERASE to PCSR */ 4489 bscv_put8(ssp, chan_prog, 4490 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), 4491 EBUS_PROGRAM_PCR_ERASE); 4492 4493 /* read PCSR to check status */ 4494 retval = bscv_get8(ssp, chan_prog, 4495 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR)); 4496 return (retval); 4497 } 4498 4499 static uint8_t 4500 bscv_do_erase(bscv_soft_state_t *ssp, uint32_t loadaddr, uint32_t image_size, 4501 boolean_t is_image2) 4502 { 4503 int retryable = BSC_ERASE_RETRY_LIMIT; 4504 uint8_t retval; 4505 4506 while (retryable--) { 4507 retval = bscv_erase_once(ssp, loadaddr, image_size); 4508 if (PSR_SUCCESS(retval)) 4509 break; 4510 else 4511 cmn_err(CE_WARN, "erase error 0x%x, attempt %d" 4512 ", base 0x%x, size 0x%x, %s image", 4513 retval, BSC_ERASE_RETRY_LIMIT - retryable, 4514 loadaddr, image_size, 4515 is_image2 ? "main" : "loader"); 4516 } 4517 4518 return (retval); 4519 } 4520 4521 static uint8_t 4522 bscv_set_page(bscv_soft_state_t *ssp, uint32_t addr) 4523 { 4524 uint32_t retval; 4525 int retryable = BSC_PAGE_RETRY_LIMIT; 4526 4527 ASSERT(bscv_held(ssp)); 4528 4529 while (retryable--) { 4530 4531 /* 4532 * Write the page address and read it back for confirmation. 4533 */ 4534 bscv_put32(ssp, chan_prog, 4535 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PADR0), 4536 addr); 4537 retval = bscv_get32(ssp, chan_prog, 4538 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PADR0)); 4539 4540 if (retval == addr) 4541 break; 4542 else { 4543 cmn_err(CE_WARN, "programmming error, attempt %d, " 4544 "set page 0x%x, read back 0x%x", 4545 BSC_PAGE_RETRY_LIMIT - retryable, 4546 addr, retval); 4547 } 4548 } 4549 return ((addr == retval) ? EBUS_PROGRAM_PSR_SUCCESS : 4550 EBUS_PROGRAM_PSR_INVALID_OPERATION); 4551 } 4552 4553 static uint8_t 4554 bscv_do_page_data_once(bscv_soft_state_t *ssp, uint32_t index, 4555 uint32_t image_size, uint32_t pagesize, uint8_t *imagep, 4556 uint16_t *calcd_chksum) 4557 { 4558 uint32_t size; 4559 uint16_t chksum; 4560 int i; 4561 uint8_t retval; 4562 4563 ASSERT(bscv_held(ssp)); 4564 4565 BSCV_TRACE(ssp, 'P', "bscv_do_page_data_once", "index 0x%x", index); 4566 4567 /* write PSIZ bytes to PDAT */ 4568 if (index + pagesize < image_size) { 4569 bscv_rep_rw8(ssp, chan_prog, imagep + index, 4570 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_DATA), 4571 pagesize, DDI_DEV_NO_AUTOINCR, B_TRUE /* write */); 4572 size = pagesize; 4573 } else { 4574 BSCV_TRACE(ssp, 'P', "bscv_do_page_once", 4575 "Sending last block, last 0x%x bytes", 4576 (image_size % pagesize)); 4577 size = (image_size - index); 4578 bscv_rep_rw8(ssp, chan_prog, imagep + index, 4579 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_DATA), 4580 size, DDI_DEV_NO_AUTOINCR, B_TRUE /* write */); 4581 /* Now pad the rest of the page with zeros */ 4582 for (i = size; i < pagesize; i++) { 4583 bscv_put8(ssp, chan_prog, 4584 BSCVA(EBUS_CMD_SPACE_PROGRAM, 4585 EBUS_PROGRAM_DATA), 4586 0); 4587 } 4588 } 4589 4590 /* write the checksum to PCSM */ 4591 chksum = 0; 4592 for (i = 0; i < size; i++) { 4593 chksum = ((chksum << 3) | (chksum >> 13)) ^ 4594 *(imagep + index + i); 4595 } 4596 /* Cope with non-pagesize sized bufers */ 4597 for (; i < pagesize; i++) { 4598 chksum = ((chksum << 3) | (chksum >> 13)) ^ 0; 4599 } 4600 bscv_put16(ssp, chan_prog, 4601 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSM0), chksum); 4602 4603 bscv_put8(ssp, chan_prog, 4604 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), 4605 EBUS_PROGRAM_PCR_PROGRAM); 4606 4607 retval = bscv_get8(ssp, chan_prog, 4608 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR)); 4609 4610 *calcd_chksum = chksum; 4611 return (retval); 4612 } 4613 4614 static uint8_t bscv_do_page(bscv_soft_state_t *ssp, uint32_t loadaddr, 4615 uint32_t index, uint32_t image_size, uint32_t pagesize, uint8_t *imagep, 4616 boolean_t is_image2) 4617 { 4618 int retryable = BSC_PAGE_RETRY_LIMIT; 4619 uint8_t retval; 4620 uint16_t checksum; 4621 4622 BSCV_TRACE(ssp, 'P', "bscv_do_page", "index 0x%x", index); 4623 4624 while (retryable--) { 4625 /* 4626 * Set the page address (with retries). If this is not 4627 * successful, then there is no point carrying on and sending 4628 * the page's data since that could cause random memory 4629 * corruption in the microcontroller. 4630 */ 4631 retval = bscv_set_page(ssp, loadaddr + index); 4632 if (!PSR_SUCCESS(retval)) { 4633 cmn_err(CE_WARN, "programming error 0x%x, " 4634 "could not setup page address 0x%x, %s image", 4635 retval, loadaddr + index, 4636 is_image2 ? "main" : "loader"); 4637 break; 4638 } 4639 4640 /* 4641 * Send down the data for the page 4642 */ 4643 4644 BSCV_TRACE(ssp, 'P', "bscv_do_page", "sending data for page"); 4645 4646 retval = bscv_do_page_data_once(ssp, index, image_size, 4647 pagesize, imagep, &checksum); 4648 if (PSR_SUCCESS(retval)) 4649 break; 4650 else 4651 cmn_err(CE_WARN, "programming error 0x%x," 4652 " attempt %d, index 0x%x, checksum 0x%x, %s image", 4653 retval, BSC_PAGE_RETRY_LIMIT - retryable, 4654 index, checksum, is_image2 ? "main" : "loader"); 4655 } 4656 4657 BSCV_TRACE(ssp, 'U', "bscv_do_page", "Returning 0x%x for index 0x%x," 4658 " checksum 0x%x, %s image", retval, index, checksum, 4659 is_image2 ? "main" : "loader"); 4660 4661 return (retval); 4662 } 4663 4664 static uint8_t 4665 bscv_do_pages(bscv_soft_state_t *ssp, uint32_t loadaddr, uint32_t image_size, 4666 uint32_t pagesize, uint8_t *imagep, boolean_t is_image2) 4667 { 4668 uint8_t retval; 4669 uint32_t index; 4670 4671 BSCV_TRACE(ssp, 'P', "bscv_do_pages", "entered"); 4672 4673 for (index = 0; index < image_size; index += pagesize) { 4674 retval = bscv_do_page(ssp, loadaddr, index, image_size, 4675 pagesize, imagep, is_image2); 4676 if (bscv_faulty(ssp) || !PSR_SUCCESS(retval)) { 4677 BSCV_TRACE(ssp, 'U', "bscv_do_pages", 4678 "Failed to program lom (status 0x%x)", retval); 4679 break; 4680 } 4681 } 4682 4683 return (retval); 4684 } 4685 4686 static int 4687 bscv_prog_image(bscv_soft_state_t *ssp, boolean_t is_image2, 4688 uint8_t *imagep, int image_size, uint32_t loadaddr) 4689 { 4690 uint32_t pagesize; 4691 int res = 0; 4692 uint8_t retval; 4693 4694 BSCV_TRACE(ssp, 'U', "bscv_prog_image", 4695 "image 0x%x, imagep %p, size 0x%x", 4696 is_image2 ? 2 : 1, imagep, image_size); 4697 4698 if (!bscv_check_loader_config(ssp, is_image2)) 4699 /* 4700 * Return no error to allow userland to continue on with 4701 * downloading the image. 4702 */ 4703 return (0); 4704 4705 bscv_enter(ssp); 4706 4707 pagesize = bscv_get_pagesize(ssp); 4708 4709 retval = bscv_enter_programming_mode(ssp); 4710 if (bscv_faulty(ssp) || !PSR_PROG(retval)) { 4711 cmn_err(CE_WARN, "lom: Failed to enter program mode, error 0x%x" 4712 ", %s image", retval, is_image2 ? "main" : "loader"); 4713 res = EIO; 4714 goto BSCV_PROG_IMAGE_END; 4715 } 4716 BSCV_TRACE(ssp, 'U', "bscv_prog_image", "entered programming mode"); 4717 4718 /* 4719 * Only issue an erase if we are downloading the image. The loader 4720 * does not need this step. 4721 */ 4722 if (is_image2 && (image_size != 0)) { 4723 retval = bscv_do_erase(ssp, loadaddr, image_size, is_image2); 4724 if (bscv_faulty(ssp) || !PSR_SUCCESS(retval)) { 4725 cmn_err(CE_WARN, 4726 "lom: Erase failed during programming, status 0x%x", 4727 retval); 4728 res = EIO; 4729 goto BSCV_PROG_IMAGE_END; 4730 } else { 4731 BSCV_TRACE(ssp, 'U', "bscv_prog_image", 4732 "erase complete - programming..."); 4733 4734 } 4735 } 4736 4737 (void) bscv_set_pagesize(ssp, pagesize); 4738 4739 retval = bscv_do_pages(ssp, loadaddr, image_size, pagesize, imagep, 4740 is_image2); 4741 if (bscv_faulty(ssp) || !PSR_SUCCESS(retval)) { 4742 BSCV_TRACE(ssp, 'U', "bscv_prog_image", 4743 "Failed to program lom (status 0x%x)", retval); 4744 res = EIO; 4745 goto BSCV_PROG_IMAGE_END; 4746 } 4747 4748 BSCV_PROG_IMAGE_END: 4749 if (res == 0 && !is_image2) { 4750 /* 4751 * We've downloaded the loader successfully. Now make the 4752 * microcontroller jump to it. 4753 */ 4754 bscv_set_jump_to_addr(ssp, loadaddr); 4755 ssp->loader_running = B_TRUE; 4756 bscv_leave_programming_mode(ssp, B_TRUE); 4757 } else { 4758 /* 4759 * We've just downloaded either the loader which failed, or 4760 * the image (which may or may not have been successful). 4761 */ 4762 bscv_set_jump_to_addr(ssp, 0); 4763 4764 if (res != 0) { 4765 BSCV_TRACE(ssp, 'U', "bscv_prog_image", 4766 "got error 0x%x - leaving programming mode", 4767 res); 4768 cmn_err(CE_WARN, "programming error 0x%x, %s image", 4769 res, is_image2 ? "main" : "loader"); 4770 } else { 4771 BSCV_TRACE(ssp, 'U', "bscv_prog_image", 4772 "programming complete - leaving programming mode"); 4773 } 4774 4775 bscv_leave_programming_mode(ssp, B_FALSE); 4776 ssp->loader_running = B_FALSE; 4777 } 4778 4779 bscv_exit(ssp); 4780 4781 return (res); 4782 } 4783 4784 4785 static int 4786 bscv_prog_receive_image(bscv_soft_state_t *ssp, lom_prog_t *prog, 4787 uint8_t *imagep, int max_size) 4788 { 4789 int res = 0; 4790 uint_t size; 4791 int32_t loadaddr; 4792 lom_prog_data_t *prog_data; 4793 4794 if ((prog->index & 0x7FFF) != ssp->prog_index) { 4795 BSCV_TRACE(ssp, 'U', "bscv_prog_receive_image", 4796 "Got wrong buffer 0x%x, expected 0x%x", 4797 prog->index & 0x7fff, ssp->prog_index); 4798 return (EINVAL); 4799 } 4800 4801 /* 4802 * We want to get the whole image and then do the download. 4803 * It is assumed the device is now in programming mode. 4804 */ 4805 4806 if ((prog->index & 0x7fff) == 0) { 4807 /* Starting a new image */ 4808 ssp->image_ptr = 0; 4809 } 4810 4811 if ((ssp->image_ptr + prog->size) > max_size) { 4812 cmn_err(CE_WARN, 4813 "lom image exceeded maximum size: got 0x%x, maximum 0x%x", 4814 (ssp->image_ptr + prog->size), max_size); 4815 return (EFAULT); 4816 } 4817 bcopy(prog->data, &imagep[ssp->image_ptr], prog->size); 4818 ssp->image_ptr += prog->size; 4819 4820 ssp->prog_index++; 4821 4822 if (prog->index & 0x8000) { 4823 /* 4824 * OK we have the whole image so synch up and start download. 4825 */ 4826 prog_data = (lom_prog_data_t *)imagep; 4827 if (prog_data->header.magic != PROG_MAGIC) { 4828 /* Old style programming data */ 4829 /* Take care image may not fill all of structure */ 4830 4831 /* sign extend loadaddr from 16 to 32 bits */ 4832 loadaddr = (int16_t)((uint16_t)((imagep[2] << 8) + 4833 imagep[3])); 4834 4835 size = (imagep[0] << 8) + imagep[1]; 4836 if (size != (ssp->image_ptr - 4)) { 4837 cmn_err(CE_WARN, "Image size mismatch:" 4838 " expected 0x%x, got 0x%x", 4839 size, (ssp->image_ptr - 1)); 4840 } 4841 4842 res = bscv_prog_image(ssp, 4843 ssp->image2_processing, 4844 imagep + 4, ssp->image_ptr - 4, loadaddr); 4845 4846 /* 4847 * Done the loading so set the flag to say we are doing 4848 * the other image. 4849 */ 4850 ssp->image2_processing = !ssp->image2_processing; 4851 } else if ((ssp->image_ptr < sizeof (*prog_data)) || 4852 (prog_data->platform.bscv.size != 4853 (ssp->image_ptr - sizeof (*prog_data)))) { 4854 /* Image too small for new style image */ 4855 cmn_err(CE_WARN, "image too small"); 4856 res = EINVAL; 4857 } else { 4858 /* New style programming image */ 4859 switch (prog_data->platmagic) { 4860 case PROG_PLAT_BSCV_IMAGE: 4861 res = bscv_prog_image(ssp, B_TRUE, 4862 imagep + sizeof (*prog_data), 4863 prog_data->platform.bscv.size, 4864 prog_data->platform.bscv.loadaddr); 4865 ssp->image2_processing = B_FALSE; 4866 break; 4867 case PROG_PLAT_BSCV_LOADER: 4868 res = bscv_prog_image(ssp, B_FALSE, 4869 imagep + sizeof (*prog_data), 4870 prog_data->platform.bscv.size, 4871 prog_data->platform.bscv.loadaddr); 4872 ssp->image2_processing = B_TRUE; 4873 break; 4874 default: 4875 cmn_err(CE_WARN, "unknown platmagic 0x%x", 4876 prog_data->platmagic); 4877 res = EINVAL; 4878 break; 4879 } 4880 } 4881 ssp->prog_index = 0; 4882 ssp->image_ptr = 0; 4883 } 4884 return (res); 4885 } 4886 4887 static int 4888 bscv_prog_stop_lom(bscv_soft_state_t *ssp) 4889 { 4890 if (ssp->programming) { 4891 /* 4892 * Already programming - this may be a retry of a failed 4893 * programming attempt or just a software error! 4894 */ 4895 goto queue_stopped; 4896 } 4897 4898 if (bscv_pause_event_daemon(ssp) == BSCV_FAILURE) { 4899 BSCV_TRACE(ssp, 'Q', "bscv_prog_stop_lom", 4900 "failed to pause event daemon thread"); 4901 return (EAGAIN); 4902 } 4903 4904 bscv_enter(ssp); 4905 4906 ssp->programming = B_TRUE; 4907 4908 bscv_exit(ssp); 4909 4910 queue_stopped: 4911 4912 ssp->prog_index = 0; 4913 ssp->image2_processing = B_FALSE; 4914 4915 return (0); 4916 } 4917 4918 static int 4919 bscv_prog_start_lom(bscv_soft_state_t *ssp) 4920 { 4921 int res = 0; 4922 4923 if (!ssp->programming) { 4924 /* Not programming so this is not a valid command */ 4925 return (EINVAL); 4926 } 4927 4928 if (ssp->image != NULL) { 4929 kmem_free((void *)ssp->image, BSC_IMAGE_MAX_SIZE); 4930 ssp->image = NULL; 4931 } 4932 4933 /* 4934 * OK we are out of reset now so: 4935 * Probe the firmware and set everything up. 4936 */ 4937 4938 bscv_enter(ssp); 4939 4940 /* Explicit clear fault because things may have been mended now */ 4941 bscv_clear_fault(ssp); 4942 4943 if (ssp->loader_running) { 4944 cmn_err(CE_WARN, "Firmware upgrade failed to exit loader - " 4945 "performing forced exit"); 4946 /* Must try to restart the lom here. */ 4947 /* Ensure prog mode entry to enable PRGMODE_OFF */ 4948 bscv_put8(ssp, chan_prog, 4949 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), 4950 EBUS_PROGRAM_PCR_PRGMODE_ON); 4951 bscv_put8(ssp, chan_prog, 4952 BSCVA(EBUS_CMD_SPACE_PROGRAM, EBUS_PROGRAM_PCSR), 4953 EBUS_PROGRAM_PCR_PRGMODE_OFF); 4954 ssp->loader_running = B_FALSE; 4955 /* give the lom chance to recover */ 4956 delay(drv_usectohz(5000000)); /* 5 seconds */ 4957 } 4958 4959 ssp->prog_mode_only = B_FALSE; 4960 ssp->programming = B_FALSE; 4961 4962 if (bscv_attach_common(ssp) == DDI_FAILURE) { 4963 ssp->prog_mode_only = B_TRUE; 4964 res = EIO; 4965 } 4966 4967 bscv_exit(ssp); 4968 4969 if (!ssp->prog_mode_only) { 4970 /* 4971 * Start the event thread after the queue has started 4972 * 4973 * Not sure if this is entirely correct because 4974 * the other code at the end of bscv_attach() 4975 * does not get run here. 4976 */ 4977 bscv_start_event_daemon(ssp); 4978 bscv_resume_event_daemon(ssp); 4979 } 4980 4981 return (res); 4982 } 4983 4984 4985 /* 4986 * ********************************************************************* 4987 * Attach processing 4988 * ********************************************************************* 4989 */ 4990 4991 /* 4992 * function - bscv_attach_common 4993 * description - this routine co-ordinates the initialisation of the 4994 * driver both at attach time and after firmware programming. 4995 * sequence - bscv_setup_capability - read LOMlite2 capabilities 4996 * bscv_probe_check - test comms and setup register cache 4997 * bscv_setup_hostname - sync stored name in lom with nodename. 4998 * bscv_setup_static_info - read device names etc. 4999 * bscv_setup_events - start event daemon etc. 5000 * 5001 * inputs - device information structure, DDI_ATTACH command 5002 * outputs - DDI_SUCCESS or DDI_FAILURE 5003 */ 5004 5005 static int 5006 bscv_attach_common(bscv_soft_state_t *ssp) 5007 { 5008 ASSERT(bscv_held(ssp)); 5009 5010 BSCV_TRACE(ssp, 'A', "bscv_attach_common:", ""); 5011 5012 /* 5013 * Set the threshold for reporting messages to the console to 5014 * Warnings or higher. 5015 */ 5016 ssp->reporting_level = 2; 5017 5018 /* 5019 * When the system is not running the Operating System, make 5020 * the microcontroller print event messages straight onto the 5021 * console. 5022 */ 5023 ssp->serial_reporting = LOM_SER_EVENTS_DEF; 5024 5025 /* Setup capabilities */ 5026 bscv_setup_capability(ssp); 5027 5028 if (bscv_probe_check(ssp) == DDI_FAILURE) { 5029 cmn_err(CE_WARN, "BSC chip not responding"); 5030 /* 5031 * We want lom -G to talk to this driver upon broken firmware 5032 * so we prematurely return success here. 5033 */ 5034 return (DDI_SUCCESS); 5035 } 5036 5037 bscv_setup_hostname(ssp); 5038 bscv_setup_static_info(ssp); 5039 bscv_setup_events(ssp); 5040 5041 #if defined(__i386) || defined(__amd64) 5042 bscv_inform_bsc(ssp, BSC_INFORM_ONLINE); 5043 #endif /* __i386 || __amd64 */ 5044 /* 5045 * Watchdog configuration and CPU signatures are sent asynchronously 5046 * with respect to attach so only inform the BSC if we've already 5047 * sent the data in the past. 5048 */ 5049 5050 if (ssp->progress & BSCV_WDOG_CFG) 5051 bscv_setup_watchdog(ssp); 5052 5053 #ifdef __sparc 5054 if (ssp->progress & BSCV_SIG_SENT) 5055 bscv_write_sig(ssp, ssp->last_sig); 5056 #endif /* __sparc */ 5057 5058 return (DDI_SUCCESS); 5059 } 5060 5061 /* 5062 * function - bscv_cleanup 5063 * description - routine that does the necessary tidying up if the attach 5064 * request fails or the driver is to be detached. 5065 * If the event thread has been started we may fail to 5066 * stop it (because it is busy) so we fail the cleanup 5067 * and hence the detach. All other calls to bscv_cleanup 5068 * are done before the event daemon is started. 5069 * inputs - soft state structure address. 5070 * outputs - DDI_SUCCESS or DDI_FAILURE. 5071 */ 5072 5073 static int 5074 bscv_cleanup(bscv_soft_state_t *ssp) 5075 { 5076 int instance; 5077 uint8_t bits2set; 5078 uint8_t bits2clear; 5079 5080 instance = ssp->instance; 5081 5082 if (ssp->progress & BSCV_LOCKS) { 5083 bscv_enter(ssp); 5084 } 5085 5086 if (ssp->progress & BSCV_THREAD) { 5087 if (bscv_stop_event_daemon(ssp) == DDI_FAILURE) { 5088 /* Fail the cleanup - may be able to cleanup later */ 5089 if (ssp->progress & BSCV_LOCKS) { 5090 bscv_exit(ssp); 5091 } 5092 return (DDI_FAILURE); 5093 } 5094 } 5095 5096 if (ssp->progress & BSCV_NODES) { 5097 ddi_remove_minor_node(ssp->dip, NULL); 5098 } 5099 5100 if (ssp->progress & BSCV_MAPPED_REGS) { 5101 /* 5102 * switch back on serial event reporting - cover all configs. 5103 */ 5104 bits2set = 0; 5105 bits2clear = 0; 5106 if (ssp->serial_reporting == LOM_SER_EVENTS_ON) { 5107 bits2clear |= EBUS_ALARM_NOEVENTS; 5108 } else if (ssp->serial_reporting == LOM_SER_EVENTS_OFF) { 5109 bits2set |= EBUS_ALARM_NOEVENTS; 5110 } else if (ssp->serial_reporting == LOM_SER_EVENTS_DEF) { 5111 bits2clear |= EBUS_ALARM_NOEVENTS; 5112 } 5113 bscv_setclear8_volatile(ssp, chan_general, EBUS_IDX_ALARM, 5114 bits2set, bits2clear); 5115 5116 /* 5117 * disable the reset function if we have enabled 5118 * it. We don't want any nasty surprises like system 5119 * rebooting unexpectedly. If we timeout on the busy 5120 * flag we just have to carry on. 5121 */ 5122 5123 BSCV_TRACE(ssp, 'W', "bscv_cleanup", 5124 "bscv_cleanup - disable wdog"); 5125 if (bscv_get8_cached(ssp, EBUS_IDX_WDOG_CTRL) & 5126 EBUS_WDOG_ENABLE) { 5127 bscv_setclear8(ssp, chan_general, EBUS_IDX_WDOG_CTRL, 5128 0, EBUS_WDOG_RST | EBUS_WDOG_ENABLE); 5129 } 5130 } 5131 5132 /* 5133 * unmap registers 5134 */ 5135 5136 if (ssp->progress & BSCV_MAPPED_REGS) { 5137 bscv_unmap_regs(ssp); 5138 } 5139 5140 /* 5141 * release any memory allocated for mutexes and condition 5142 * variables before deallocating the structures containing them 5143 */ 5144 5145 if (ssp->progress & BSCV_LOCKS) { 5146 bscv_exit(ssp); 5147 cv_destroy(&ssp->task_cv); 5148 cv_destroy(&ssp->task_evnt_cv); 5149 mutex_destroy(&ssp->task_mu); 5150 mutex_destroy(&ssp->prog_mu); 5151 mutex_destroy(&ssp->cmd_mutex); 5152 } 5153 5154 if (ssp->image != NULL) { 5155 kmem_free((void *)ssp->image, BSC_IMAGE_MAX_SIZE); 5156 } 5157 5158 #if defined(__i386) || defined(__amd64) 5159 bscv_watchdog_cyclic_remove(ssp); 5160 #endif /* __i386 || __amd64 */ 5161 ddi_soft_state_free(bscv_statep, instance); 5162 5163 return (DDI_SUCCESS); 5164 } 5165 5166 /* 5167 * function - bscv_setup_capability 5168 * description - probe the lom find what capabilities are present for 5169 * us to use. 5170 * inputs - soft state ptr 5171 * outputs - returns DDI_SUCCESS or DDI_FAILURE 5172 */ 5173 static void bscv_setup_capability(bscv_soft_state_t *ssp) 5174 { 5175 ASSERT(bscv_held(ssp)); 5176 5177 if (ssp->prog_mode_only) { 5178 /* Turn off all capabilities */ 5179 ssp->cap0 = 0; 5180 ssp->cap1 = 0; 5181 ssp->cap2 = 0; 5182 return; 5183 } 5184 5185 ssp->cap0 = bscv_get8(ssp, chan_general, EBUS_IDX_CAP0); 5186 ssp->cap1 = bscv_get8(ssp, chan_general, EBUS_IDX_CAP1); 5187 ssp->cap2 = bscv_get8(ssp, chan_general, EBUS_IDX_CAP2); 5188 if (!bscv_faulty(ssp)) { 5189 BSCV_TRACE(ssp, 'A', "bscv_setup_capability", 5190 "Capability flags cap0=0x%x cap1=0x%x, cap2=0x%x", 5191 ssp->cap0, ssp->cap1, ssp->cap2); 5192 } else { 5193 cmn_err(CE_WARN, "!Could not read capability flags"); 5194 ssp->cap0 = 0; ssp->cap1 = 0; ssp->cap2 = 0; 5195 } 5196 } 5197 5198 /* 5199 * function - bscv_probe_check 5200 * description - probe the lom to check for correct operation 5201 * has a side effect of setting up the cached registers and 5202 * updates ssp->prog_mode_only. 5203 * inputs - soft state ptr 5204 * outputs - returns DDI_SUCCESS or DDI_FAILURE 5205 */ 5206 5207 static int bscv_probe_check(bscv_soft_state_t *ssp) 5208 { 5209 int i; 5210 uint8_t probeval; 5211 5212 ASSERT(bscv_held(ssp)); 5213 5214 BSCV_TRACE(ssp, 'A', "bscv_probe_check", ""); 5215 5216 if (!ssp->prog_mode_only) { 5217 /* 5218 * Make sure probe location is OK so that we are 5219 * in sync. 5220 * We want to make sure that this is not faulty so we 5221 * do a bscv_clear_fault to clear any existing 5222 * fault records down. 5223 */ 5224 bscv_clear_fault(ssp); 5225 probeval = bscv_get8(ssp, chan_general, EBUS_IDX_PROBEAA); 5226 if (bscv_faulty(ssp)) { 5227 ssp->prog_mode_only = B_TRUE; 5228 } else if (probeval != 0xAA) { 5229 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5230 "LOMlite out of sync"); 5231 5232 /* 5233 * It may be that the LOMlite was out of 5234 * sync so lets try the read again. 5235 */ 5236 probeval = bscv_get8(ssp, chan_general, 5237 EBUS_IDX_PROBEAA); 5238 if (bscv_faulty(ssp)) { 5239 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5240 "Init readAA1 failed"); 5241 ssp->prog_mode_only = B_TRUE; 5242 } else if (probeval != 0xAA) { 5243 /* 5244 * OK that is twice we are out so I 5245 * guess the LOMlite is in trouble 5246 */ 5247 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5248 "Init readAA probe failed - got 0x%x", 5249 probeval); 5250 ssp->prog_mode_only = B_TRUE; 5251 } 5252 } 5253 } 5254 5255 /* 5256 * Read in all page zero lom registers. 5257 * Read state change 1st so we dont miss anything and clear it. 5258 * Note: we discard the values because we rely on bscv_get8 to 5259 * setup the cache of register values. 5260 */ 5261 5262 if (!ssp->prog_mode_only) { 5263 (void) bscv_get8(ssp, chan_general, EBUS_IDX_STATE_CHNG); 5264 if (bscv_faulty(ssp)) { 5265 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5266 "Read of state change register failed"); 5267 ssp->prog_mode_only = B_TRUE; 5268 } 5269 } 5270 5271 if (!ssp->prog_mode_only) { 5272 for (i = 1; i < 0x80; i++) { 5273 switch (i) { 5274 case EBUS_IDX_STATE_CHNG: 5275 case EBUS_IDX_CMD_RES: 5276 case EBUS_IDX_HNAME_CHAR: 5277 /* 5278 * Should not read these - they have side 5279 * effects. 5280 */ 5281 break; 5282 default: 5283 (void) bscv_get8(ssp, chan_general, i); 5284 break; 5285 } 5286 if (bscv_faulty(ssp)) { 5287 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5288 "Initial read or register %2x failed", i); 5289 ssp->prog_mode_only = B_TRUE; 5290 /* Might as well give up now! */ 5291 break; 5292 } 5293 } 5294 } 5295 5296 /* 5297 * Check the probe keys so we know the lom is OK 5298 */ 5299 5300 if (!ssp->prog_mode_only) { 5301 if ((bscv_get8_cached(ssp, EBUS_IDX_PROBE55) != 0x55) || 5302 (bscv_get8_cached(ssp, EBUS_IDX_PROBEAA) != 0xAA)) { 5303 5304 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5305 "LOMlite Probe failed"); 5306 for (i = 0; i < 0x8; i++) { 5307 BSCV_TRACE(ssp, 'A', "bscv_probe_check", 5308 "%2x %2x %2x %2x %2x %2x %2x %2x %2x " 5309 "%2x %2x %2x %2x %2x %2x %2x %2x %2x", 5310 bscv_get8_cached(ssp, i), 5311 bscv_get8_cached(ssp, i + 1), 5312 bscv_get8_cached(ssp, i + 2), 5313 bscv_get8_cached(ssp, i + 3), 5314 bscv_get8_cached(ssp, i + 4), 5315 bscv_get8_cached(ssp, i + 5), 5316 bscv_get8_cached(ssp, i + 6), 5317 bscv_get8_cached(ssp, i + 7), 5318 bscv_get8_cached(ssp, i + 8), 5319 bscv_get8_cached(ssp, i + 9), 5320 bscv_get8_cached(ssp, i + 10), 5321 bscv_get8_cached(ssp, i + 11), 5322 bscv_get8_cached(ssp, i + 12), 5323 bscv_get8_cached(ssp, i + 13), 5324 bscv_get8_cached(ssp, i + 14), 5325 bscv_get8_cached(ssp, i + 15)); 5326 } 5327 ssp->prog_mode_only = B_TRUE; 5328 } 5329 } 5330 5331 return ((ssp->prog_mode_only == B_FALSE) ? DDI_SUCCESS : DDI_FAILURE); 5332 } 5333 5334 #ifdef __sparc 5335 /* 5336 * function - bscv_idi_set 5337 * description - bscv inter driver interface set function 5338 * inputs - structure which defines type of service required and data 5339 * ouputs - none 5340 * 5341 * This is the Entry Point function for the platmod driver. It works out which 5342 * X Bus channel ought to deliver the service requested. 5343 */ 5344 void 5345 bscv_idi_set(struct bscv_idi_info info) 5346 { 5347 struct bscv_idi_callout *tbl; 5348 boolean_t retval; 5349 5350 ASSERT(bscv_idi_mgr.magic == BSCV_IDI_CALLOUT_MAGIC); 5351 5352 if (bscv_idi_mgr.tbl == NULL) { 5353 if (bscv_idi_err()) 5354 cmn_err(CE_WARN, "!bscv_idi_set : cannot find " 5355 "bscv_callout_table"); 5356 return; 5357 } else if (bscv_idi_mgr.valid_inst == (uint32_t)~0) { 5358 if (bscv_idi_err()) 5359 /* 5360 * This error message can appear in the context of 5361 * another driver, say platmod or todblade. We want 5362 * to clearly indicate the culprit driver so put in 5363 * the driver name. 5364 */ 5365 cmn_err(CE_WARN, "!bscv_idi_set : no valid " 5366 "driver instance of " 5367 MYNAME); 5368 return; 5369 } 5370 5371 tbl = bscv_idi_mgr.tbl; 5372 5373 while (tbl->type != BSCV_IDI_NULL) { 5374 if (tbl->type == info.type) { 5375 /* 5376 * We service the request with a valid instance number 5377 * for the driver. 5378 */ 5379 retval = ((tbl->fn) (info)); 5380 5381 /* 5382 * If the request was serviced, clear any accumulated 5383 * error counters so future warnings will be reported if 5384 * seen. 5385 */ 5386 if (retval == B_TRUE) 5387 bscv_idi_clear_err(); 5388 return; 5389 } else { 5390 tbl++; 5391 } 5392 } 5393 5394 if (bscv_idi_err()) 5395 cmn_err(CE_WARN, "!bscv_idi_set : cannot match info.type %d", 5396 info.type); 5397 } 5398 5399 /* 5400 * function - bscv_nodename_set 5401 * description - notify the event thread that a nodename change has occurred. 5402 * inputs - data from client driver 5403 * outputs - none. 5404 * side-effects - the event thread will schedule an update to the lom firmware. 5405 */ 5406 /*ARGSUSED*/ 5407 static boolean_t 5408 bscv_nodename_set(struct bscv_idi_info info) 5409 { 5410 bscv_soft_state_t *ssp; 5411 5412 ssp = ddi_get_soft_state(bscv_statep, bscv_idi_mgr.valid_inst); 5413 5414 if (ssp == NULL) { 5415 if (bscv_idi_err()) 5416 cmn_err(CE_WARN, "!blade_nodename_set: cannot get ssp"); 5417 return (B_FALSE); 5418 } 5419 5420 /* Get a lock on the SSP, notify our change, then exit */ 5421 mutex_enter(&ssp->task_mu); 5422 ssp->nodename_change = B_TRUE; 5423 cv_signal(&ssp->task_cv); 5424 mutex_exit(&ssp->task_mu); 5425 5426 return (B_TRUE); 5427 } 5428 5429 /* 5430 * function - bscv_sig_set 5431 * description - write a signature 5432 * inputs - data from client driver 5433 * outputs - none. 5434 */ 5435 static boolean_t 5436 bscv_sig_set(struct bscv_idi_info info) 5437 { 5438 bscv_soft_state_t *ssp; 5439 bscv_sig_t sig; 5440 5441 ssp = ddi_get_soft_state(bscv_statep, bscv_idi_mgr.valid_inst); 5442 5443 if (ssp == NULL) { 5444 if (bscv_idi_err()) 5445 cmn_err(CE_WARN, "!blade_nodename_set: cannot get ssp"); 5446 return (B_FALSE); 5447 } 5448 5449 /* Service the request */ 5450 bcopy(info.data, &sig, sizeof (sig)); 5451 bscv_enter(ssp); 5452 bscv_write_sig(ssp, sig); 5453 bscv_exit(ssp); 5454 5455 return (B_TRUE); 5456 } 5457 #endif /* __sparc */ 5458 5459 static void 5460 bscv_wdog_do_pat(bscv_soft_state_t *ssp) 5461 { 5462 uint8_t pat; 5463 5464 /* 5465 * The value of the dog pat is a sequence number which wraps around, 5466 * bounded by BSCV_WDOG_PAT_SEQ_MASK. 5467 */ 5468 pat = ssp->pat_seq++; 5469 pat &= EBUS_WDOG_NB_PAT_SEQ_MASK; 5470 5471 /* Set top nibble to indicate a pat */ 5472 pat |= EBUS_WDOG_NB_PAT; 5473 5474 /* 5475 * Now pat the dog. This exercises a special protocol in the 5476 * bus nexus that offers : non-blocking IO, and timely delivery, 5477 * callable from high-level interrupt context. The requirement 5478 * on us is that the channel is not shared for any other use. 5479 * This means for chan_wdogpat, nothing may use channel[chan].regs 5480 * or channel.[chan].handle. 5481 */ 5482 5483 ddi_put8(ssp->channel[chan_wdogpat].handle, 5484 ssp->channel[chan_wdogpat].regs, pat); 5485 5486 BSCV_TRACE(ssp, 'W', "bscv_wdog_pat", "patted the dog with seq %d", 5487 pat); 5488 } 5489 5490 #ifdef __sparc 5491 /* 5492 * function - bscv_wdog_pat 5493 * description - pat the watchdog 5494 * inputs - data from client driver 5495 * outputs - none. 5496 */ 5497 /*ARGSUSED*/ 5498 static boolean_t 5499 bscv_wdog_pat(struct bscv_idi_info info) 5500 { 5501 /* 5502 * This function remembers if it has ever been called with the 5503 * configure option set. 5504 */ 5505 bscv_soft_state_t *ssp; 5506 5507 ssp = ddi_get_soft_state(bscv_statep, bscv_idi_mgr.valid_inst); 5508 5509 if (ssp == NULL) { 5510 if (bscv_idi_err()) 5511 cmn_err(CE_WARN, "!bscv_wdog_pat: cannot get ssp"); 5512 return (B_FALSE); 5513 } else if (ssp->nchannels == 0) { 5514 /* Didn't manage to map handles so ddi_{get,put}* broken */ 5515 if (bscv_idi_err()) 5516 cmn_err(CE_WARN, "!bscv_wdog_pat: handle not mapped"); 5517 return (B_FALSE); 5518 } 5519 5520 bscv_wdog_do_pat(ssp); 5521 return (B_TRUE); 5522 } 5523 5524 /* 5525 * function - bscv_wdog_cfg 5526 * description - configure the watchdog 5527 * inputs - data from client driver 5528 * outputs - none. 5529 */ 5530 static boolean_t 5531 bscv_wdog_cfg(struct bscv_idi_info info) 5532 { 5533 bscv_soft_state_t *ssp; 5534 5535 ssp = ddi_get_soft_state(bscv_statep, bscv_idi_mgr.valid_inst); 5536 5537 if (ssp == NULL) { 5538 if (bscv_idi_err()) 5539 cmn_err(CE_WARN, "!bscv_wdog_cfg: cannot get ssp"); 5540 return (B_FALSE); 5541 } else if (ssp->nchannels == 0) { 5542 /* Didn't manage to map handles so ddi_{get,put}* broken */ 5543 if (bscv_idi_err()) 5544 cmn_err(CE_WARN, "!bscv_wdog_cfg: handle not mapped"); 5545 return (B_FALSE); 5546 } 5547 5548 if (sizeof (bscv_wdog_t) != info.size) { 5549 BSCV_TRACE(ssp, 'W', "bscv_wdog_set", "data passed in is size" 5550 " %d instead of %d", info.size, 5551 sizeof (bscv_wdog_t)); 5552 return (B_FALSE); 5553 } 5554 5555 BSCV_TRACE(ssp, 'W', "bscv_wdog_cfg", "enable_wdog %s, " 5556 "wdog_timeout_s %d, reset_system_on_timeout %s", 5557 ((bscv_wdog_t *)info.data)->enable_wdog ? "enabled" : "disabled", 5558 ((bscv_wdog_t *)info.data)->wdog_timeout_s, 5559 ((bscv_wdog_t *)info.data)->reset_system_on_timeout ? "yes" : "no"); 5560 bscv_write_wdog_cfg(ssp, 5561 ((bscv_wdog_t *)info.data)->wdog_timeout_s, 5562 ((bscv_wdog_t *)info.data)->enable_wdog, 5563 ((bscv_wdog_t *)info.data)->reset_system_on_timeout); 5564 return (B_TRUE); 5565 } 5566 #endif /* __sparc */ 5567 5568 static void 5569 bscv_write_wdog_cfg(bscv_soft_state_t *ssp, 5570 uint_t wdog_timeout_s, 5571 boolean_t enable_wdog, 5572 uint8_t reset_system_on_timeout) 5573 { 5574 uint8_t cfg = EBUS_WDOG_NB_CFG; 5575 5576 /* 5577 * Configure the timeout value (1 to 127 seconds). 5578 * Note that a policy is implemented at the bsc/ssp which bounds 5579 * the value further. The bounding here is to fit the timeout value 5580 * into the 7 bits the bsc uses. 5581 */ 5582 if (wdog_timeout_s < 1) 5583 ssp->watchdog_timeout = 1; 5584 else if (wdog_timeout_s > 127) 5585 ssp->watchdog_timeout = 127; 5586 else 5587 ssp->watchdog_timeout = wdog_timeout_s; 5588 5589 /* 5590 * Configure the watchdog on or off. 5591 */ 5592 if (enable_wdog) 5593 cfg |= EBUS_WDOG_NB_CFG_ENB; 5594 else 5595 cfg &= ~EBUS_WDOG_NB_CFG_ENB; 5596 5597 /* 5598 * Configure whether the microcontroller should reset the system when 5599 * the watchdog expires. 5600 */ 5601 ssp->watchdog_reset_on_timeout = reset_system_on_timeout; 5602 5603 ddi_put8(ssp->channel[chan_wdogpat].handle, 5604 ssp->channel[chan_wdogpat].regs, cfg); 5605 5606 /* have the event daemon set the timeout value and whether to reset */ 5607 ssp->watchdog_change = B_TRUE; 5608 5609 BSCV_TRACE(ssp, 'W', "bscv_wdog_cfg", 5610 "configured the dog with cfg 0x%x", cfg); 5611 } 5612 5613 /* 5614 * function - bscv_setup_watchdog 5615 * description - setup the bsc watchdog 5616 * inputs - soft state ptr 5617 * outputs - 5618 */ 5619 static void bscv_setup_watchdog(bscv_soft_state_t *ssp) 5620 { 5621 uint8_t set = 0; 5622 uint8_t clear = 0; 5623 #ifdef __sparc 5624 extern int watchdog_activated; 5625 #endif /* __sparc */ 5626 5627 ASSERT(bscv_held(ssp)); 5628 5629 /* Set the timeout */ 5630 bscv_put8(ssp, chan_general, 5631 EBUS_IDX_WDOG_TIME, ssp->watchdog_timeout); 5632 5633 /* Set whether to reset the system on timeout */ 5634 if (ssp->watchdog_reset_on_timeout) { 5635 set |= EBUS_WDOG_RST; 5636 } else { 5637 clear |= EBUS_WDOG_RST; 5638 } 5639 5640 if (watchdog_activated) { 5641 set |= EBUS_WDOG_ENABLE; 5642 } else { 5643 clear |= EBUS_WDOG_ENABLE; 5644 } 5645 5646 /* Set other host defaults */ 5647 clear |= (EBUS_WDOG_BREAK_DISABLE | EBUS_WDOG_AL3_FANPSU 5648 | EBUS_WDOG_AL3_WDOG); 5649 5650 bscv_setclear8_volatile(ssp, chan_general, EBUS_IDX_WDOG_CTRL, 5651 set, clear); 5652 5653 #if defined(__i386) || defined(__amd64) 5654 /* start the cyclic based watchdog patter */ 5655 bscv_watchdog_cyclic_add(ssp); 5656 #endif /* __i386 || __amd64 */ 5657 ssp->progress |= BSCV_WDOG_CFG; 5658 } 5659 5660 5661 /* 5662 * function - bscv_setup_hostname 5663 * description - setup the lom hostname if different from the nodename 5664 * inputs - soft state ptr 5665 * outputs - none 5666 */ 5667 5668 static void bscv_setup_hostname(bscv_soft_state_t *ssp) 5669 { 5670 char host_nodename[128]; 5671 char lom_nodename[128]; 5672 size_t hostlen; 5673 size_t nodelen; 5674 5675 ASSERT(bscv_held(ssp)); 5676 5677 /* 5678 * Check machine label is the same as the 5679 * system nodename. 5680 */ 5681 (void) strncpy(host_nodename, utsname.nodename, 5682 sizeof (host_nodename)); 5683 5684 /* read in lom hostname */ 5685 bscv_read_hostname(ssp, lom_nodename); 5686 5687 /* Enforce null termination */ 5688 host_nodename[sizeof (host_nodename) - 1] = '\0'; 5689 lom_nodename[sizeof (lom_nodename) - 1] = '\0'; 5690 5691 hostlen = (size_t)bscv_get8(ssp, chan_general, EBUS_IDX_HNAME_LENGTH); 5692 nodelen = (size_t)strlen(host_nodename); 5693 if ((nodelen > 0) && 5694 ((hostlen != nodelen) || (strcmp((const char *)&lom_nodename, 5695 (const char *)&host_nodename)) || 5696 (hostlen == 0))) { 5697 BSCV_TRACE(ssp, 'A', "bscv_setup_hostname", 5698 "nodename(%s,%d) != bsc label(%s,%d)", 5699 host_nodename, nodelen, lom_nodename, hostlen); 5700 5701 /* Write new label into LOM EEPROM */ 5702 bscv_write_hostname(ssp, 5703 host_nodename, 5704 (uint8_t)strlen(host_nodename)); 5705 } 5706 5707 ssp->progress |= BSCV_HOSTNAME_DONE; 5708 } 5709 5710 /* 5711 * function - bscv_read_hostname 5712 * description - read the current hostname from the lom 5713 * inputs - soft state pointer and buffer to store the hostname in. 5714 * outputs - none 5715 */ 5716 5717 static void 5718 bscv_read_hostname(bscv_soft_state_t *ssp, char *lom_nodename) 5719 { 5720 int num_failures; 5721 boolean_t needretry; 5722 int length; 5723 int i; 5724 5725 ASSERT(bscv_held(ssp)); 5726 5727 /* 5728 * We have a special failure case here because a retry of a read 5729 * causes data to be lost. Thus we handle the retries ourselves 5730 * and are also responsible for detemining if the lom is faulty 5731 */ 5732 for (num_failures = 0; 5733 num_failures < BSC_FAILURE_RETRY_LIMIT; 5734 num_failures++) { 5735 bscv_clear_fault(ssp); 5736 length = bscv_get8(ssp, chan_general, EBUS_IDX_HNAME_LENGTH); 5737 if (bscv_faulty(ssp)) { 5738 needretry = 1; 5739 } else { 5740 needretry = 0; 5741 for (i = 0; i < length; i++) { 5742 lom_nodename[i] = bscv_get8_once(ssp, 5743 chan_general, EBUS_IDX_HNAME_CHAR); 5744 /* Retry on any error */ 5745 if (bscv_retcode(ssp) != 0) { 5746 needretry = 1; 5747 break; 5748 } 5749 } 5750 /* null terminate for strcmp later */ 5751 lom_nodename[length] = '\0'; 5752 } 5753 if (!needretry) { 5754 break; 5755 } 5756 /* Force the nodename to be empty */ 5757 lom_nodename[0] = '\0'; 5758 } 5759 5760 if (needretry) { 5761 /* Failure - we ran out of retries */ 5762 cmn_err(CE_WARN, 5763 "bscv_read_hostname: retried %d times, giving up", 5764 num_failures); 5765 ssp->had_fault = B_TRUE; 5766 } else if (num_failures > 0) { 5767 BSCV_TRACE(ssp, 'R', "bscv_read_hostname", 5768 "retried %d times, succeeded", num_failures); 5769 } 5770 } 5771 5772 /* 5773 * function - bscv_write_hostname 5774 * description - write a new hostname to the lom 5775 * inputs - soft state pointer, pointer to new name, name length 5776 * outputs - none 5777 */ 5778 static void 5779 bscv_write_hostname(bscv_soft_state_t *ssp, 5780 char *host_nodename, uint8_t length) 5781 { 5782 int num_failures; 5783 boolean_t needretry; 5784 int i; 5785 5786 ASSERT(bscv_held(ssp)); 5787 5788 /* 5789 * We have a special failure case here because a retry of a read 5790 * causes data to be lost. Thus we handle the retries ourselves 5791 * and are also responsible for detemining if the lom is faulty 5792 */ 5793 for (num_failures = 0; 5794 num_failures < BSC_FAILURE_RETRY_LIMIT; 5795 num_failures++) { 5796 bscv_clear_fault(ssp); 5797 bscv_put8(ssp, chan_general, EBUS_IDX_HNAME_LENGTH, length); 5798 if (bscv_faulty(ssp)) { 5799 needretry = 1; 5800 } else { 5801 needretry = 0; 5802 for (i = 0; i < length; i++) { 5803 bscv_put8_once(ssp, chan_general, 5804 EBUS_IDX_HNAME_CHAR, host_nodename[i]); 5805 /* Retry on any error */ 5806 if (bscv_retcode(ssp) != 0) { 5807 needretry = 1; 5808 break; 5809 } 5810 } 5811 } 5812 if (!needretry) { 5813 break; 5814 } 5815 } 5816 5817 if (needretry) { 5818 /* Failure - we ran out of retries */ 5819 cmn_err(CE_WARN, 5820 "bscv_write_hostname: retried %d times, giving up", 5821 num_failures); 5822 ssp->had_fault = B_TRUE; 5823 } else if (num_failures > 0) { 5824 BSCV_TRACE(ssp, 'R', "bscv_write_hostname", 5825 "retried %d times, succeeded", num_failures); 5826 } 5827 } 5828 5829 /* 5830 * function - bscv_setup_static_info 5831 * description - read in static information from the lom at attach time. 5832 * inputs - soft state ptr 5833 * outputs - none 5834 */ 5835 5836 static void 5837 bscv_setup_static_info(bscv_soft_state_t *ssp) 5838 { 5839 uint8_t addr_space_ptr; 5840 uint16_t mask; 5841 uint8_t fanspeed; 5842 int oldtemps[MAX_TEMPS]; 5843 int8_t temp; 5844 int i; 5845 5846 ASSERT(bscv_held(ssp)); 5847 5848 /* 5849 * Finally read in some static info like device names, 5850 * shutdown enabled, etc before the queue starts. 5851 */ 5852 5853 /* 5854 * To get the volts static info we need address space 2 5855 */ 5856 bzero(&ssp->volts, sizeof (lom_volts_t)); 5857 ssp->volts.num = EBUS_CONFIG2_NSUPPLY_DEC( 5858 bscv_get8(ssp, chan_general, EBUS_IDX_CONFIG2)); 5859 if (ssp->volts.num > MAX_VOLTS) { 5860 cmn_err(CE_WARN, 5861 "lom: firmware reported too many voltage lines. "); 5862 cmn_err(CE_CONT, "Reported %d, maximum is %d", 5863 ssp->volts.num, MAX_VOLTS); 5864 ssp->volts.num = MAX_VOLTS; 5865 } 5866 5867 BSCV_TRACE(ssp, 'A', "bscv_setup_static_info", 5868 "num volts %d", ssp->volts.num); 5869 (void) bscv_read_env_name(ssp, 5870 EBUS_CMD_SPACE2, 5871 EBUS_IDX2_SUPPLY_NAME_START, 5872 EBUS_IDX2_SUPPLY_NAME_END, 5873 ssp->volts.name, 5874 ssp->volts.num); 5875 5876 mask = bscv_get8(ssp, chan_general, BSCVA(EBUS_CMD_SPACE2, 5877 EBUS_IDX2_SUPPLY_FATAL_MASK1)) << 8; 5878 mask |= bscv_get8(ssp, chan_general, BSCVA(EBUS_CMD_SPACE2, 5879 EBUS_IDX2_SUPPLY_FATAL_MASK2)); 5880 5881 for (i = 0; i < ssp->volts.num; i++) { 5882 ssp->volts.shutdown_enabled[i] = 5883 (((mask >> i) & 1) == 0) ? 0 : 1; 5884 } 5885 5886 /* 5887 * Get the temperature static info and populate initial temperatures. 5888 * Do not destroy old temperature values if the new value is not 5889 * known i.e. if the device is inaccessible. 5890 */ 5891 bcopy(ssp->temps.temp, oldtemps, sizeof (oldtemps)); 5892 5893 bzero(&ssp->temps, sizeof (lom_temp_t)); 5894 ssp->temps.num = EBUS_CONFIG2_NTEMP_DEC( 5895 bscv_get8(ssp, chan_general, EBUS_IDX_CONFIG2)); 5896 if (ssp->temps.num > MAX_TEMPS) { 5897 cmn_err(CE_WARN, 5898 "lom: firmware reported too many temperatures being " 5899 "monitored."); 5900 cmn_err(CE_CONT, "Reported %d, maximum is %d", 5901 ssp->temps.num, MAX_TEMPS); 5902 ssp->temps.num = MAX_TEMPS; 5903 } 5904 ssp->temps.num_ov = EBUS_CONFIG3_NOTEMP_DEC( 5905 bscv_get8(ssp, chan_general, EBUS_IDX_CONFIG3)); 5906 if (ssp->temps.num_ov > MAX_TEMPS) { 5907 cmn_err(CE_WARN, 5908 "lom: firmware reported too many over temperatures being " 5909 "monitored."); 5910 cmn_err(CE_CONT, "Reported %d, maximum is %d", 5911 ssp->temps.num_ov, MAX_TEMPS); 5912 ssp->temps.num_ov = MAX_TEMPS; 5913 } 5914 BSCV_TRACE(ssp, 'A', "bscv_setup_static_info", 5915 "num temps %d, over temps %d", 5916 ssp->temps.num, ssp->temps.num_ov); 5917 5918 addr_space_ptr = bscv_read_env_name(ssp, 5919 EBUS_CMD_SPACE4, 5920 EBUS_IDX4_TEMP_NAME_START, 5921 EBUS_IDX4_TEMP_NAME_END, 5922 ssp->temps.name, 5923 ssp->temps.num); 5924 5925 for (i = 0; i < ssp->temps.num; i++) { 5926 ssp->temps.warning[i] = (int8_t)bscv_get8(ssp, chan_general, 5927 BSCVA(EBUS_CMD_SPACE4, EBUS_IDX4_TEMP_WARN1 + i)); 5928 5929 /* 5930 * If shutdown is not enabled then set it as zero so 5931 * it is not displayed by the utility. 5932 */ 5933 if ((bscv_get8(ssp, chan_general, BSCVA(EBUS_CMD_SPACE4, 5934 EBUS_IDX4_TEMP_FATAL_MASK)) >> i) & 0x01) { 5935 ssp->temps.shutdown[i] = (int8_t)bscv_get8(ssp, 5936 chan_general, 5937 BSCVA(EBUS_CMD_SPACE4, EBUS_IDX4_TEMP_SDOWN1 + i)); 5938 } else { 5939 ssp->temps.shutdown[i] = 0; 5940 } 5941 } 5942 5943 for (i = 0; i < ssp->temps.num; i++) { 5944 temp = bscv_get8(ssp, chan_general, EBUS_IDX_TEMP1 + i); 5945 if ((temp <= LOM_TEMP_MAX_VALUE) || 5946 (temp == LOM_TEMP_STATE_NOT_PRESENT)) { 5947 ssp->temps.temp[i] = temp; 5948 } else { 5949 /* New value is not known - use old value */ 5950 ssp->temps.temp[i] = oldtemps[i]; 5951 } 5952 } 5953 5954 /* 5955 * Check for and skip a single 0xff character between the 5956 * temperature and over temperature names 5957 */ 5958 if (bscv_get8(ssp, chan_general, 5959 BSCVA(EBUS_CMD_SPACE4, addr_space_ptr)) == 0xff) { 5960 addr_space_ptr++; 5961 } 5962 5963 (void) bscv_read_env_name(ssp, 5964 EBUS_CMD_SPACE4, 5965 addr_space_ptr, 5966 EBUS_IDX4_TEMP_NAME_END, 5967 ssp->temps.name_ov, 5968 ssp->temps.num_ov); 5969 5970 /* 5971 * To get the CB static info we need address space 3 5972 */ 5973 bzero(&ssp->sflags, sizeof (lom_sflags_t)); 5974 ssp->sflags.num = EBUS_CONFIG3_NBREAKERS_DEC(bscv_get8(ssp, 5975 chan_general, EBUS_IDX_CONFIG3)); 5976 if (ssp->sflags.num > MAX_STATS) { 5977 cmn_err(CE_WARN, 5978 "lom: firmware reported too many status flags."); 5979 cmn_err(CE_CONT, 5980 "Reported %d, maximum is %d", 5981 ssp->sflags.num, MAX_STATS); 5982 ssp->sflags.num = MAX_STATS; 5983 } 5984 BSCV_TRACE(ssp, 'A', "bscv_setup_static_info", 5985 "num sflags %d", ssp->sflags.num); 5986 5987 (void) bscv_read_env_name(ssp, 5988 EBUS_CMD_SPACE3, 5989 EBUS_IDX3_BREAKER_NAME_START, 5990 EBUS_IDX3_BREAKER_NAME_END, 5991 ssp->sflags.name, 5992 ssp->sflags.num); 5993 5994 5995 /* 5996 * To get the fan static info we need address space 5 5997 */ 5998 ssp->num_fans = EBUS_CONFIG_NFAN_DEC( 5999 bscv_get8(ssp, chan_general, EBUS_IDX_CONFIG)); 6000 if (ssp->num_fans > MAX_FANS) { 6001 cmn_err(CE_WARN, 6002 "lom: firmware reported too many fans. "); 6003 cmn_err(CE_CONT, 6004 "Reported %d, maximum is %d", 6005 ssp->num_fans, MAX_FANS); 6006 ssp->num_fans = MAX_FANS; 6007 } 6008 6009 for (i = 0; i < ssp->num_fans; i++) { 6010 fanspeed = bscv_get8(ssp, chan_general, 6011 EBUS_IDX_FAN1_SPEED + i); 6012 if ((fanspeed <= LOM_FAN_MAX_SPEED) || 6013 (fanspeed == LOM_FAN_NOT_PRESENT)) { 6014 /* 6015 * Do not destroy previous values unless the 6016 * value is definitive. 6017 */ 6018 ssp->fanspeed[i] = fanspeed; 6019 } 6020 } 6021 6022 BSCV_TRACE(ssp, 'A', "bscv_setup_static_info", 6023 "num fans %d", ssp->num_fans); 6024 6025 (void) bscv_read_env_name(ssp, 6026 EBUS_CMD_SPACE5, 6027 EBUS_IDX5_FAN_NAME_START, 6028 EBUS_IDX5_FAN_NAME_END, 6029 ssp->fan_names, 6030 ssp->num_fans); 6031 6032 /* Get led static information from address space 10 */ 6033 6034 (void) bscv_read_env_name(ssp, 6035 EBUS_CMD_SPACE_LEDS, 6036 EBUS_IDX10_LED_NAME_START, 6037 EBUS_IDX10_LED_NAME_END, 6038 ssp->led_names, 6039 MAX_LED_ID); 6040 } 6041 6042 /* 6043 * function - bscv_read_env_name 6044 * description - read in static environment names 6045 * warning changes address space and the caller relies 6046 * on this behaviour. 6047 * inputs - soft state ptr, chosen address space, 6048 * start of name data, end of name data, 6049 * name storage, number of names. 6050 * outputs - next address for reading name data. 6051 */ 6052 6053 static uint8_t 6054 bscv_read_env_name(bscv_soft_state_t *ssp, 6055 uint8_t addr_space, 6056 uint8_t addr_start, 6057 uint8_t addr_end, 6058 char namebuf[][MAX_LOM2_NAME_STR], 6059 int numnames) 6060 { 6061 int i; 6062 int nameidx; 6063 int namemax; 6064 unsigned int addr_space_ptr; 6065 uint8_t this_char; 6066 6067 ASSERT(bscv_held(ssp)); 6068 6069 BSCV_TRACE(ssp, 'A', "bscv_read_env_name", 6070 "bscv_read_env_name, space %d, start 0x%x, end 0x%x, numnames %d", 6071 addr_space, addr_start, addr_end, numnames); 6072 6073 addr_space_ptr = addr_start; 6074 6075 for (i = 0; i < numnames; i++) { 6076 nameidx = 0; 6077 namemax = sizeof (namebuf[i]); 6078 bzero(namebuf[i], namemax); 6079 6080 while (addr_space_ptr <= addr_end) { 6081 /* 6082 * Read the current character. 6083 */ 6084 this_char = bscv_get8(ssp, chan_general, 6085 BSCVA(addr_space, addr_space_ptr)); 6086 6087 if (this_char == 0xff) { 6088 /* 6089 * Ran out of names - this must 6090 * be the end of the name. 6091 * This is really an error because 6092 * we have just seen either a non-NUL 6093 * terminated string or the number of 6094 * strings did not match what was 6095 * reported. 6096 */ 6097 break; 6098 } 6099 /* 6100 * We increment the buffer pointer now so that 6101 * it is ready for the next read 6102 */ 6103 addr_space_ptr++; 6104 6105 if (this_char == '\0') { 6106 /* Found end of string - done */ 6107 break; 6108 } 6109 if (nameidx < (namemax - 1)) { 6110 /* 6111 * Buffer not full - record character 6112 * NOTE we always leave room for the NUL 6113 * terminator. 6114 */ 6115 namebuf[i][nameidx++] = this_char; 6116 } 6117 } 6118 /* Ensure null termination */ 6119 namebuf[i][nameidx] = '\0'; 6120 } 6121 /* Clamp addr_space_ptr to 0xff because we return uint8_t */ 6122 if (addr_space_ptr > 0xff) { 6123 addr_space_ptr = 0xff; 6124 } 6125 return (addr_space_ptr); 6126 } 6127 6128 /* 6129 * function - bscv_setup_events 6130 * description - initialise the event reporting code 6131 * inputs - soft state ptr 6132 * outputs - DDI_SUCCESS or DDI_FAILURE 6133 */ 6134 6135 static void 6136 bscv_setup_events(bscv_soft_state_t *ssp) 6137 { 6138 uint8_t bits2set; 6139 uint8_t bits2clear; 6140 6141 ASSERT(bscv_held(ssp)); 6142 6143 /* 6144 * deal with event reporting - cover all cases 6145 */ 6146 6147 bits2set = 0; 6148 bits2clear = 0; 6149 if (ssp->serial_reporting == LOM_SER_EVENTS_ON) { 6150 bits2clear |= EBUS_ALARM_NOEVENTS; 6151 } else if (ssp->serial_reporting == LOM_SER_EVENTS_OFF) { 6152 bits2set |= EBUS_ALARM_NOEVENTS; 6153 } else if (ssp->serial_reporting == LOM_SER_EVENTS_DEF) { 6154 bits2set |= EBUS_ALARM_NOEVENTS; 6155 } 6156 bscv_setclear8_volatile(ssp, chan_general, EBUS_IDX_ALARM, 6157 bits2set, bits2clear); 6158 } 6159 6160 #ifdef __sparc 6161 /* 6162 * function - bscv_write_sig 6163 * description - write out a signature, taking care to deal with any strange 6164 * values for CPU ID 6165 * inputs - soft state ptr, signature 6166 * outputs - none 6167 */ 6168 static void 6169 bscv_write_sig(bscv_soft_state_t *ssp, bscv_sig_t s) 6170 { 6171 ASSERT(bscv_held(ssp)); 6172 6173 /* Upload the signature */ 6174 bscv_put32(ssp, chan_cpusig, 6175 BSCVA(EBUS_CMD_SPACE_CPUSIG, EBUS_IDX11_CPU_SIG_MSB), 6176 s.sig_info.signature); 6177 6178 /* 6179 * We always write the CPU ID last because this tells the firmware 6180 * that the signature is fully uploaded and therefore to consume the 6181 * data. This is required since the signature is > 1 byte in size 6182 * and we transmit data in single bytes. 6183 */ 6184 if (s.cpu == ~0) { 6185 /* ~0 means the signature applies to any CPU. */ 6186 bscv_put8(ssp, chan_cpusig, 6187 BSCVA(EBUS_CMD_SPACE_CPUSIG, EBUS_IDX11_CPU_ID), 6188 EBUS_ANY_CPU_ID); 6189 } else { 6190 if (s.cpu > 255) { 6191 /* 6192 * The CPU ID supplied is unexpectedly large. Lets 6193 * just use the bottom bits, in case other high order 6194 * bits are being used for special meaning. 6195 */ 6196 cmn_err(CE_WARN, "CPU Signature ID 0x%x > 255", s.cpu); 6197 s.cpu %= 256; 6198 cmn_err(CE_CONT, "using ID 0x%x instead ", s.cpu); 6199 } 6200 bscv_put8(ssp, chan_cpusig, 6201 BSCVA(EBUS_CMD_SPACE_CPUSIG, EBUS_IDX11_CPU_ID), 6202 (uint8_t)s.cpu); 6203 } 6204 6205 ssp->last_sig = s; 6206 ssp->progress |= BSCV_SIG_SENT; 6207 } 6208 #endif /* __sparc */ 6209 6210 #if defined(__i386) || defined(__amd64) 6211 6212 /* 6213 * function - bscv_inform_bsc 6214 * description - inform bsc of driver state for logging purposes 6215 * inputs - driver soft state, state 6216 * outputs - none 6217 * 6218 */ 6219 static void 6220 bscv_inform_bsc(bscv_soft_state_t *ssp, uint32_t state) 6221 { 6222 ASSERT(bscv_held(ssp)); 6223 6224 BSCV_TRACE(ssp, 'X', "bscv_inform_bsc", 6225 "bscv_inform_bsc: state=%d", state); 6226 6227 bscv_put32(ssp, chan_general, 6228 BSCVA(EBUS_CMD_SPACE_CPUSIG, EBUS_IDX11_CPU_SIG_MSB), state); 6229 bscv_put8(ssp, chan_cpusig, 6230 BSCVA(EBUS_CMD_SPACE_CPUSIG, EBUS_IDX11_CPU_ID), EBUS_ANY_CPU_ID); 6231 } 6232 6233 /* 6234 * function - bscv_watchdog_pat_request 6235 * description - request a heartbeat pat 6236 * inputs - timeout value in seconds 6237 * outputs - none 6238 */ 6239 static void 6240 bscv_watchdog_pat_request(void *arg) 6241 { 6242 bscv_soft_state_t *ssp = (bscv_soft_state_t *)arg; 6243 6244 bscv_wdog_do_pat(ssp); 6245 } 6246 6247 /* 6248 * function - bscv_watchdog_cfg_request 6249 * description - request configuration of the bsc hardware watchdog 6250 * inputs - new state (0=disabled, 1=enabled) 6251 * outputs - one if successful, zero if unsuccesful 6252 */ 6253 static void 6254 bscv_watchdog_cfg_request(bscv_soft_state_t *ssp, uint8_t new_state) 6255 { 6256 ASSERT(new_state == WDOG_ON || new_state == WDOG_OFF); 6257 6258 watchdog_activated = new_state; 6259 BSCV_TRACE(ssp, 'X', "bscv_watchdog_cfg_request", 6260 "watchdog_activated=%d", watchdog_activated); 6261 bscv_write_wdog_cfg(ssp, 6262 bscv_watchdog_timeout_seconds, 6263 new_state, 6264 wdog_reset_on_timeout); 6265 } 6266 6267 /* 6268 * function - bscv_set_watchdog_timer 6269 * description - setup the heartbeat timeout value 6270 * inputs - timeout value in seconds 6271 * outputs - zero if the value was not changed 6272 * otherwise the current value 6273 */ 6274 static uint_t 6275 bscv_set_watchdog_timer(bscv_soft_state_t *ssp, uint_t timeoutval) 6276 { 6277 BSCV_TRACE(ssp, 'X', "bscv_set_watchdog_timer:", 6278 "timeout=%d", timeoutval); 6279 6280 /* 6281 * We get started during bscv_attach only 6282 * if bscv_watchdog_enable is set. 6283 */ 6284 if (bscv_watchdog_available && (!watchdog_activated || 6285 (watchdog_activated && 6286 (timeoutval != bscv_watchdog_timeout_seconds)))) { 6287 bscv_watchdog_timeout_seconds = timeoutval; 6288 bscv_watchdog_cfg_request(ssp, WDOG_ON); 6289 return (bscv_watchdog_timeout_seconds); 6290 } 6291 return (0); 6292 } 6293 6294 /* 6295 * function - bscv_clear_watchdog_timer 6296 * description - add the watchdog patter cyclic 6297 * inputs - driver soft state 6298 * outputs - value of watchdog timeout in seconds 6299 * 6300 * This function is a copy of the SPARC implementation 6301 * in the todblade clock driver. 6302 */ 6303 static void 6304 bscv_clear_watchdog_timer(bscv_soft_state_t *ssp) 6305 { 6306 BSCV_TRACE(ssp, 'X', "bscv_clear_watchdog_timer", ""); 6307 6308 if (bscv_watchdog_available && watchdog_activated) { 6309 bscv_watchdog_enable = 0; 6310 bscv_watchdog_cfg_request(ssp, WDOG_OFF); 6311 } 6312 } 6313 6314 /* 6315 * function - bscv_panic_callback 6316 * description - called when we panic so we can disabled the watchdog 6317 * inputs - driver soft state pointer 6318 * outputs - DDI_SUCCESS 6319 */ 6320 /*ARGSUSED1*/ 6321 static boolean_t 6322 bscv_panic_callback(void *arg, int code) 6323 { 6324 bscv_soft_state_t *ssp = (bscv_soft_state_t *)arg; 6325 6326 BSCV_TRACE(ssp, 'X', "bscv_panic_callback", 6327 "disabling watchdog"); 6328 6329 bscv_clear_watchdog_timer(ssp); 6330 /* 6331 * We dont get interrupts during the panic callback. But bscbus 6332 * takes care of all this 6333 */ 6334 bscv_full_stop(ssp); 6335 return (DDI_SUCCESS); 6336 } 6337 6338 /* 6339 * function - bscv_watchdog_cyclic_add 6340 * description - add the watchdog patter cyclic 6341 * inputs - driver soft state 6342 * outputs - none 6343 */ 6344 static void 6345 bscv_watchdog_cyclic_add(bscv_soft_state_t *ssp) 6346 { 6347 if (ssp->periodic_id != NULL) { 6348 return; 6349 } 6350 6351 ssp->periodic_id = ddi_periodic_add(bscv_watchdog_pat_request, ssp, 6352 WATCHDOG_PAT_INTERVAL, DDI_IPL_10); 6353 6354 BSCV_TRACE(ssp, 'X', "bscv_watchdog_cyclic_add:", 6355 "cyclic added"); 6356 } 6357 6358 /* 6359 * function - bscv_watchdog_cyclic_remove 6360 * description - remove the watchdog patter cyclic 6361 * inputs - soft state ptr 6362 * outputs - none 6363 */ 6364 static void 6365 bscv_watchdog_cyclic_remove(bscv_soft_state_t *ssp) 6366 { 6367 if (ssp->periodic_id == NULL) { 6368 return; 6369 } 6370 ddi_periodic_delete(ssp->periodic_id); 6371 ssp->periodic_id = NULL; 6372 BSCV_TRACE(ssp, 'X', "bscv_watchdog_cyclic_remove:", 6373 "cyclic removed"); 6374 } 6375 #endif /* __i386 || __amd64 */ 6376 6377 6378 /* 6379 * General utility routines ... 6380 */ 6381 6382 #ifdef DEBUG 6383 6384 static void 6385 bscv_trace(bscv_soft_state_t *ssp, char code, const char *caller, 6386 const char *fmt, ...) 6387 { 6388 char buf[256]; 6389 char *p; 6390 va_list va; 6391 6392 if (ssp->debug & (1 << (code-'@'))) { 6393 p = buf; 6394 (void) snprintf(p, sizeof (buf) - (p - buf), 6395 "%s/%s: ", MYNAME, caller); 6396 p += strlen(p); 6397 6398 va_start(va, fmt); 6399 (void) vsnprintf(p, sizeof (buf) - (p - buf), fmt, va); 6400 va_end(va); 6401 6402 buf[sizeof (buf) - 1] = '\0'; 6403 (void) strlog((short)ssp->majornum, (short)ssp->minornum, code, 6404 SL_TRACE, buf); 6405 } 6406 } 6407 6408 #else /* DEBUG */ 6409 6410 _NOTE(ARGSUSED(0)) 6411 static void 6412 bscv_trace(bscv_soft_state_t *ssp, char code, const char *caller, 6413 const char *fmt, ...) 6414 { 6415 } 6416 6417 #endif /* DEBUG */ 6418
Indexes created Mon Nov 23 13:58:57 UTC 2009
Terms of Use |
Privacy |
Trademarks |
Copyright Policy |
Site Guidelines |
Help
Your use of this web site or any of its content or software indicates your agreement to be bound by these Terms of Use.
Copyright © 1995-2008 Sun Microsystems, Inc.